LNP™ ELCRES™ EXL9034

Identification & Functionality

Additives Included

Flame Retardant,

UV Stabilizer

Polymer Name

Polycarbonate-Siloxane Copolymer

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics,

Polycarbonates

Features & Benefits

Materials Features

Excellent Low Temperature Ductility,

Flame Retardant,

Good Processability,

Good UV Stability,

Good Weather Stability,

High Impact Resistance,

Low Temperature Ductility,

Low Temperature Impact Resistance,

UV Resistant,

UV Stabilized,

Unreinforced

Applications & Uses

Markets

Automotive & Transportation,

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Healthcare & Pharma,

Industrial

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Automotive Lighting,

Exterior & Body,

Interior

Building & Construction — Building Envelope & Roofing

Glazing & Window Elements

Building & Construction — Building Materials

Interior Fixtures

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays,

Industrial Automation,

Lighting

Consumer Goods — Housewares

Consumer Goods — Lawn & Garden

Healthcare & Pharma — Medical

Medical Devices & Assemblies

Electrical & Electronics — Parts & Components

Batteries,

Connectors,

Switches & Relays

Automotive & Transportation — Transportation

Aerospace & Aviation,

Off Road & Recreational Vehicle (RV),

Rail & Mass Transit

Plastics & Elastomers End Uses

5G Station,

Aerospace Applications,

Air Conditioner,

Antenna,

Appliances,

Automotive Applications,

Building Materials,

Cell Phones,

Computer Components,

Construction Applications,

Consumer Applications,

Displays,

EV Charging Station,

EV Service Equipment,

Electrical Components,

Electrical Connectors,

Electrical/Electronic Applications,

Electronic Components,

Energy Management,

Energy Storage,

Front Spoiler,

Garden Equipment,

Home Appliances,

Home Decoration,

Home Decors,

Household Goods,

Industrial Applications,

Lawn Equipment,

Lighting Applications,

Medical/Healthcare Applications,

Non-LED Lighting,

PV Connector,

Photovoltaic Device,

Pool Covers,

Rail Cabin Interiors,

Rails,

Recreational Vehicle Components,

Side Spoiler,

Solar Photovoltaic Connector,

Solar Photovoltaic Device,

Specialty Vehicles,

Tablets,

Tarpaulins,

Turf Applications

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Flame Rating

UL 94 5VA,

UL 94 5VB,

UL 94 V0

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	56	MPa	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	60	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	6	%	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	70	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	2090	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	87	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2020	MPa	ASTM D790
Tensile Stress (Yield, 50 mm/min) ¹¹	55	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹¹	59	MPa	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	6	%	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	68	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	2065	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	84	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	2100	MPa	ISO 178

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.22	—	ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.4 - 0.8	%	SABIC method
Mold Shrinkage (xflow, 3.2 mm) ᵍ ¹¹	0.4 - 0.8	%	SABIC method
Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹	7	g/10 min	ASTM D1238
Melt Volume Rate (at 300°C, 1.2 kg) ¹¹	6	cm³/10 min	ISO 1133

Thermal Properties

	Value	Units	Test Method / Conditions
Vicat Softening Temperature (Rate B/50) ¹¹	145	°C	ISO 306
Vicat Softening Temperature (Rate B/50) ¹¹	147	°C	ASTM D1525
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	138	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	122	°C	ASTM D648
Vicat Softening Temperature (Rate B/120) ¹¹	146	°C	ISO 306
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000072	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000078	1/°C	ASTM E831
Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹	0.000078	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹	0.000089	1/°C	ISO 11359-2
Relative Temperature Index (Electrical) ᵖ ¹¹	130	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	115	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	130	°C	UL 746B

Electrical Properties

	Value	Units	Test Method / Conditions
Comparative Tracking Index ʳ ¹¹	600	V	IEC 60112
Hot Wire Ignition (PLC 2) ¹¹	min. 0.8	mm	UL 746A
High Ampere Arc Ignition (PLC 0) ¹¹	min. 0.8	mm	UL 746A

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	700	J/m	ASTM D256
Izod Impact (Notched, at -30°C) ¹¹	660	J/m	ASTM D256
Izod Impact (Unnotched, at 23°C) ¹¹	No break	J/m	ASTM D4812
Izod Impact (Unnotched, at -30°C) ¹¹	No break	J/m	ASTM D4812
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	66	J	ASTM D3763
Izod Impact (Unnotched, 80*10*3, at 23°C) ¹¹	No break	kJ/m²	ISO 180/1U
Izod Impact (Unnotched, 80*10*3, at -30°C) ¹¹	No break	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*3, at 23°C) ¹¹	62	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80*10*3, at -30°C) ¹¹	52	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹	66	kJ/m²	ISO 179/1eA
Charpy Impact (at -30°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹	55	kJ/m²	ISO 179/1eA
Charpy Impact (at 23°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹	No break	kJ/m²	ISO 179/1eU
Charpy Impact (at -30°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹	No break	kJ/m²	ISO 179/1eU

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	120	°C	—
Drying Time ⁷	3 - 4	Hrs	—
Drying Time (Cumulative) ⁷	48	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	295 - 315	°C	—
Nozzle Temperature ⁷	290 - 310	°C	—
Front - Zone 3 Temperature ⁷	295 - 315	°C	—
Middle - Zone 2 Temperature ⁷	280 - 305	°C	—
Rear - Zone 1 Temperature ⁷	275 - 295	°C	—
Mold Temperature ⁷	70 - 95	°C	—
Back Pressure ⁷	0.3 - 0.7	MPa	—
Screw Speed ⁷	40 - 70	rpm	—
Shot to Cylinder Size ⁷	40 - 60	%	—
Vent Depth ⁷	0.025 - 0.076	mm	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94-5VA Flame Class Rating) ᵖ	min. 3	mm	UL 94
UL Recognized (94-5VB Flame Class Rating) ᵖ	min. 2.5	mm	UL 94
UL Recognized (94V-0 Flame Class Rating) ᵖ	min. 0.8	mm	UL 94
UV-light (Water exposure/immersion) ᵖ	F1	—	UL 746C

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America