Products

KM-017IB is an impact copolymer polypropylene for injection molding. It exhibits a high rigidity as well as excellent impact strength due to the ideal combination of highly crystalline homo matrix and the well designed rubber morphology.

Elastoflo 60A-300 (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM.

Elastoprene 8134 is a linear block copolymer of styrene and butadiene, having 32% of styrene content, most of it forming a polystyrene block, which gives the polymer a thermoplastic behavior. It has a non-staining antioxidant system; FDA approved for use in food contact applications and is essentially gel free with a very clear color.

KM-Polycarb 2031-50 resin is designed for extrusion and injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.

KM840-K6M50 is a clarified polypropylene random copolymer.

KM-PP-253H is a high flow rate, nucleated and antistated homopolymer designed for injection molding applications. Typical applications include consumer products, housewares, medical components and thin-walled rigid packaging. Benefits include high flow rate, fast cycle times, good molding performance in thin-wall parts, low static charge and improved toughness. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

KM-U-143sMR is an octane copolymer MDPE Rotational Molding Resin that contains processing antioxidant and a UV stabilizer. This grade shows exceptional low temperature impact properties, low viscosity, and easy mold release.

KM-0051M is a polypropylene block copolymer for injection molding applications. It exhibits a good balance of stiffness and impact strength.

Elastoflo 90A-300 (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM.

KM 0246 HIPS applications are deep draw thermoforming, extrusion processes, and sheets for Point of Purchase displays. It can be blended with GPPS for cups and plates and disposable packaging.

Elastoflo 30A-300 (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM.

Elastoprene S1070A is a styrenic elastomer intended for injection molding and extrusion applications, offering good tensile strength, rubbery look and feel, and easy processing.

Elastoprene HS5060A NAT is a 60 Shore A unfilled TPE for injection molding applications, offering good processibility, easy colorability, good heat resistance and FDA compliance.

KM PC 3031UV-80 resin is designed for extrusion and injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.

PC VLC-1000 is for lens of glasses, UV cut off <380 nm (3mm), High Viscosity, Correcting glasses.

KM-ZM0274 is a nucleated impact copolymer with a melt flow of 25 g/10 min.

KM-0093XB is a high crystalline propylene impact copolymer designed for injection molding applications. It has excellent properties in stiffness, flow, mechanical properties, heat resistance and impact strength, which make this grade suitable for auto parts, electric appliances, large size containers, thin wall and very high speed injection applications. This is not a chemical cracked grade so it is free from surface gas mark. It can also reduce various injection problems such as surface trouble, shrink, warpage, etc. and reduce the cycle time of injection molding due to rapid crystallization

Elastoprene 40D-1000 is a thermoplastic elastomer containing fully vulcanized EPDM rubber. It is designed for applications requiring long term sealing performance even at elevated temperatures up to 135°C (275F). Can be processed using conventional thermoplastic processing equipment. Suitable for injection molding, blow molding, profile and sheet extrusion applications. Elastoprene TPV is supplied in weatherable (UV stabilized) black.

Nylux66-NAT is a general purpose PA66 grade well suited for injection molding and extrusion applications.

KM093-JM is a high impact block copolymer which has high ethylene-propylene rubber content. This grade is designed to be processed in huge injections molding equipment by improvement in mold release and anti-static. This grade is used in general household goods, thin wall applications, and home appliances.