Products

UNI-REZ 2930 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2930 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

UNI-REZ 110 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 110 polyamide resin was developed for release lacquers but can also be used as a modifying resin to improve hardness.

UNI-REZ 111 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

SYLVARES TP 2040 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties.

SYLVALITE RE 10L rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

SYLVARES TR 7125 polyterpene resin is a thermally stable polyterpene tackifier that can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. It may also be used in investment casting applications.

UNI-REZ 119 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 119 polyamide resin was developed for release lacquers and has the lowest solution viscosity but fast solvent release.

SYLVARES TR B115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance.

UNI-REZ 2218 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

UNI-REZ 2215 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

UNI-REZ 2521 (formerly UNI-REZ 521) thermoplastic polyamide resin is designed to impart a high degree of thixotropy to alkyd resins. Thixotropy can be achieved by reacting UNI-REZ 2521 with the alkyd resin at temperatures between 190-210°C. UNI-REZ 2521 can be easily processed and achieves its clear point on dilution before attainment of maximum thixotropy.

UNI-REZ 2633 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2633 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

SYLVARES 540 AMS (alpha methyl styrene) Phenolic resin is a water white aromatic hydrocarbon resin with good oxidative stability. The phenolic component improves compatibility with high polarity polymers. The low Tg of SYLVARES 540 resin improves elasticity at low temperature.

UNI-REZ 138 polyamide resin is an alcohol soluble type resin of comparatively low viscosity. It has low odor, high gel and water resistance, together with excellent solvent release and blocking resistance. Its high ester tolerance permits addition of small proportions of nitrocellulose without loss of any of these properties.

UNI-REZ 147 polyamide resin is an alcohol soluble / co-solvent type resin offering low temperature gel resistance and good compatibility with modifying resins. UNI-REZ 147 polyamide resin offers better blocking and gloss properties than other modified co-solvent types. It has good solvent compatibility, alcohol reducibility and compatibility to nitrocellulose.

UNI-REZ 2532 (formerly UNI-REZ E3525) thermoplastic polyamide resin is designed to impart a high degree of thixotropy to alkyd resins. Thixotropy can be achieved by reacting UNI-REZ 2532 with the alkyd resin at temperatures between 210-230°C. UNI-REZ 2532 can be easily processed and achieves its clear point on dilution before attainment of maximum thixotropy. UNI-REZ 2532 forms very strong and rigid thixotropic gels that are resistant to high levels of polar solvents.

SYLVALITE RE 110L rosin ester is a light-colored, high softening point, pentaerythritol ester of tall oil rosin, which has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives it provides excellent color stability when compared with other tackifiers of its type.

UNI-REZ 2294 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2294 has a moderate softening point and low viscosity which allows for a lower application temperature and fast set.

SYLVARES 525 AMS (alpha methyl styrene) Phenolic resin is a water white aromatic hydrocarbon resin with good oxidative stability. This product contains a small amount of phenol modification.

UNI-REZ 2626 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2626 hot melt polyamide adhesive has excellent heat and chemical resistance and exhibits high green strength allowing for fast line speeds.

UNI-REZ 2635 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2635 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

UNI-REZ 2721 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2721 hot melt polyamide adhesive has excellent heat and chemical resistance and exhibits high green strength allowing for fast line speeds.

UNI-REZ 2940 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2940 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

SYLVALITE RE 105XL rosin ester is very light colored and stable with moderately high softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. Adhesives formulated with SYLVALITE RE 105XL resin achieve the lightest color among the rosin ester product range.

SYLVATAC RE 25 rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

UNI-REZ 2727 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2727 hot melt polyamide adhesive has excellent heat and chemical resistance.

SYLVALITE RE 100S rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 1005 exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

SYLVARES TP 96 resin is a low softening point terpene phenolic resin having broad polymer compatibility. This thermoplastic resin is designed to tackify hot melt and pressure sensitive adhesives providing improved tack, peel and flexibility for EVA, SIS and acrylic based systems. When formulated as a co-resin, this product will significantly improve performance and properties of styrenic block copolymers based adhesives with limited impact on heat resistance.

SYLVALITE ENDURA 99 rosin ester is an ester of stabilized Tall Oil Rosin. This innovative, light colored product has been formulated to provide excellent resistance to oxidation. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives, it provides notably improved color stability as compared to other tackifiers.

UNI-REZ 2210 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 2210 polyamide resin was developed for release lacquers but can also be used as a modifying resin to improve hardness.

UNI-REZ 1533 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 1533 polyamide resin provides fast solvent release, good gel resistance, and excellent grease resistance in flexographic / gravure inks for plastic substrates.

SYLVALITE RE 80HP rosin ester is a low odor, light-colored ester of Tall Oil Rosin that has been stabilized to provide excellent performance and aging properties. The stability and polymer compatibility of this tackifier make it useful in a wide variety of adhesives, especially PSAs.

UNI-REZ 2672 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2672 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

SYLVARES TP 300 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This resin can be used in low temperature applications.

UNI-REZ 2720 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2720 hot melt polyamide adhesive offers good chemical resistance, low softening point and low viscosity which allows for a lower application temperature and fast set.