Products

Pineclear 4306 is used in Specialty coatings and Thermoplastic applications. Very low color, stabilized rosin for enhanced heat stability. It provides excellent adhesion and high bio-renewable content.

Filtrez™ 531 A is an alcohol soluble fumaric acid modified rosin ester with a high softening point and moderately high acid value. Filtrez™ 531 A can be used in solvent and water-based flexographic and in gravure inks. This resin can also be used as a leveling and gloss-promoting agent in floor polishes.

Co-solvent soluble polyamide resin 100% Solids

Bodied workhorse.

Filtrez™ 530 A is an alcohol soluble fumaric acid modified rosin ester with a high softening point and high acid value. Filtrez 530 A has good solubility and low viscosity in alcohol and aqueous ammonia solutions, which contributes to high gloss in overprint varnishes. This resin is commonly used in solvent and water-based gravure and flexographic inks. Filtrez 530 A also be used as a leveling and gloss-promoting agent in floor polishes.

Alcohol soluble non film forming polyamide resin 100% Solids.

Filtrez™ 3320 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Filtrez™ 3320 A is considered suitable for use in gravure and flexographic inks and coatings.

Co-solvent soluble polyamide resin 100% Solids

Bodied workhorse.

Pineclear 4305 is used in Lacquer coatings, Specialty coatings and Thermoplastic applications. Very low color, requires less liquid plasticizer in finished applications.

Pinerez® 2307 is a stablized rosin for excellent color stability, excellent adhesion and high bio-renewable content. It's used in Specialty coatings and Thermoplastic applications.

Optirub™ OP A is a micronized, oxidized polyethylene that easily disperses into aqueous systems. Optirub OP A is processed to a 12 micron average particle size and formulated to give excellent rub resistance, lubricity, gloss and anti-blocking properties. Addition levels range from 0.5 to 2%, depending upon application requirements.

Pinerez® 2308 is a Stablized rosin for excellent color and heat stability. Excellent adhesion to a variety of substrates. It's used in Specialty coatings and Thermoplastic applications.

Filtrez™ 3310 A is a maleic modified rosin ester. Filtrez 3310 A is designed for the thermoplastic pavement marking industry, and it allows for less plasticizer in the finished application. Other possible applications include modifying nitrocellulose for lacquer in the coatings industry.

Pineclear 4307 is used in Lacquer coatings, Specialty coatings, and Thermoplastic applications. Very low color, high viscosity and melt point for demanding thermoplastic applications.

Flex-Rez™ 2433AD A is Lawter™ polyamide resin. Flex-Rez 2433AD A has served as the industry standard for surface printing applications on films or paper. Flex-Rez 2433AD A has excellent wet-pack resistance, coupled with excellent adhesion on difficult substrates such as polyethylene, polypropylene, and coated foils.

Ultrafine™ 1000 A is a finely micronized polyethylene wax powder recommended when maximum rub and mar resistance, block resistance, slip, re-coatability and elevated processing temperatures are required. The average particle size of Ultrafine 1000 A is 7 microns with a narrow distribution of particle sizes for ease of dispersion and uniformity during processing. Addition levels range from 0.5 to 3%, depending upon application requirements.

Ultrafine™ 1WLS A is a premium polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1WLS A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Ultrafine 1WLS A is characterized by a slightly broader particle size distribution. Recommended usage level is 1 to 4%.

Polysperse™ A is a linear hydrocarbon produced by the Fischer-Tropsch process. Polysperse A has a unique spherical morphology and narrow distribution of particles for ease of dispersion and uniformity during processing. Polysperse A exhibits low surface tension, exceptional surface slip and smoothness, rub resistance, gloss, and non-marking properties. Addition levels range from 0.5-3%, depending upon application requirements.

Terlon™ 1143 A alkyd is known for its excellent pigment wetting ability and fast hard-drying properties. This alkyd is an essential ingredient in many oil-based printing inks. Terlon 1143 A aids in development and maintenance of color strength with minimal bronzing and provides flow and leveling where required. Terlon 1143 A is an important formulating tool. Terlon 1143 A is also very compatible with most ink vehicles and serves to stabilize ink formulations. Metal decorating inks based on this alkyd bake very fast and form hard abrasion resistant, glossy surfaces

Optirub™ SP1 A is a finely, micronized blend of tough polyethylene wax and premium grade PTFE. Optirub SP1 A is processed to a 6 micron average particle size and formulated to give a high degree of surface lubricity and rub resistance in inks and coatings. Addition levels range from 0.5 to 3%, depending upon application requirements.

Pineclear 4307 is used in Specialty coatings and Thermoplastic applications. Very low color, stabilized rosin for enhanced heat stability. It provides excellent adhesion and high bio-renewable content.

Alcohol soluble polyamide resin 100% Solids.

Alcohol soluble polyamide resin 100% Solids.

Ultrafine™ 1W A is a polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1W A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Recommended usage level is 1 to 4%.

Terlon™ 1147 A is a Lawter™ linseed alkyd. Terlon 1147 A alkyd is known for its excellent pigment wetting ability and fast hard-drying properties. Terlon 1147 A alkyd is an essential ingredient in many oil-based printing inks. This alkyd’s ability to develop and maintain color strength with minimal bronzing and provide flow and leveling where required make Terlon 1147 A an important formulating tool. Terlon 1147 A is very compatible with most ink vehicles and serves to stabilize ink formulations that do not hold up on long runs. Metal decorating inks based on this alkyd bake very fast and form hard abrasion-resistant, glossy surfaces.

Filtrez™ 3305 A is a maleic modified rosin ester. Filtrez™ 3305 A is used in Lacquer coatings, Specialty coatings and Thermoplastic applications. It has high viscosity for more viscous applications such as thermoplastic.

Trionol™ 1739 A is a Lawter™ specialty alkyd. Trionol 1739 A is a medium oil-length soya oil alkyd that forms hard, tough ink films with low odor. It has better compatibility with hard resins than Terlon 7 A and is recommended for low odor inks used on napkins, food cartons, etc. Trionol 1739 A is an excellent replacement for linseed alkyds in heatset inks whenever it is cost effective to do so. Trionol 1739 A is recommended for three-piece flat metal decorating lithography. It has good baking properties on metal with good color retention at oven temperatures up to 370°F. Faster baking can be achieved by adding up to 10% melamine to finished inks based in Trionol 1739 A. Trionol 1739 A avoids the gloss ghosting or yellow ghosting that sometimes occurs in sheetfed inks.

Pinerez® 2306 is a Stablized rosin for excellent color and heat stability. Excellent adhesion to a variety of substrates. It's used in Specialty coatings and Thermoplastic applications.

Flex-rez 1255 AS combines excellent alcohol solubility with nitrocellulose compatibility to produce flexographic inks having excellent gloss and runnability. It exhibits excellent tolerance for ester solvents. The high degree of compatibility along with high solubility makes Flex-rez 1255 AS an excellent polyamide for pigment wetting applications. Additionally, Flex-rez 1255 AS has outstanding gel resistance and can be used to improve gel characteristics when combined with traditional polyamide resins. Flex-rez 1255 AS has excellent adhesion on all difficult substrates.