Products

LRBG Chemicals USA UF MW51 is an unfilled, uncatalyzed resin suitable for applications requiring a low viscosity and highly reactive resin. This resin can be cured with catalysts or, in many cases, the acidity of the substrate is enough to cure the resin. Its low viscosity makes it suitable for use with a variety of fillers and extenders.

LRBG Chemicals USA UF RW-25 is an unfilled, uncatalyzed adhesive and binding resin that is suitable for a variety of applications, such as wood, cellulosic substances, and foundry sand. It can be cured using only heat or with the addition of a catalyst, which will shorten the cycle time. Increasing the catalyst content will result in a cold-cure wood glue.

LRBG Chemicals USA MUF400 is a resin binder used for flooring in hot press or high-frequency systems. It meets the commercial standard spec. SC253-63 and has a fast cure and low electrical arcing. It is used extensively by laminated truck flooring and container flooring manufacturers worldwide.

LRBG Chemicals USA MF 860 is a melamine resin in powder form designed for adhesive applications and thermoset paint modification. It can be used as-is, dissolved in water, or a combination of water and alcohol. It is commonly used by the ceiling tile industry to strengthen coatings.

LRBG Chemicals USA MF 817 is a melamine resin powder designed for use where superior penetration is needed to impregnate pattern sheets in the production of decorative laminates to achieve optimal craze resistance. Furthermore, LRBG Chemicals USA MF 817 is highly recommended for use in the manufacture of abrasives, including precision diamond cutting wheels, and has been successfully used as a modifier for phenolic resins in the production of sandpaper.

LRBG Chemicals USA MF 829 is a melamine formaldehyde resin in powder form designed specifically for the production of NEMA Grade G-9 glass fiber laminates. It is a slightly plasticized resin that does not contain any reaction catalyst ions to carry electrical charges. This resin is used in glass fabric laminates that require NEMA Grade 9 electrical performance.

LRBG Chemicals USA MF 415 is primarily designed for paper lamination but can also be used to impregnate cloth, synthetic, or glass fibers. It serves as a water-resistant thermosetting binder and in compression wood flour molding to make school furniture. Additionally, this resin has been used successfully as a plaster modifier to increase strength and environmental resistance.

LRBG Chemicals USA MF 819 is a melamine resin powder designed to provide extended solution stability at high concentrations of resin solids. This lends itself to treating applications requiring solution solids of over 55%. For example, a 60% solids solution for saturation of glass cloth to provide good wetting characteristics can be obtained using a 95/5 water-butanol solvent combination. Various types of fillers can be used with the LRBG Chemicals USA MF 819 resin, and other additives and subsequent processing are dependent on the needs of the finished molding compound. It is a neat resin without any additives, fillers, catalysts, or releasing agents.

LRBG Chemicals USA MF 412 is a fast-curing, plasticized melamine resin powder designed for use in a water solution to impregnate pattern and overlay sheets for the production of decorative laminates with excellent post-forming characteristics. When heavily catalyzed, it also works well for low-pressure lamination.

LRBG Chemicals USA MF 812 is a spray-dried melamine resin powder designed as a binder for granulated wood and wood flour to produce high-flow molding composites. This resin is light-colored, and it demonstrates excellent resistance to color change upon UV exposure.

LRBG Chemicals USA MF 430 is a fast-curing, plasticized melamine resin powder. It can be used to impregnate and coat paper, cotton, synthetic fibers, glass cloth, and fiber, as well as pattern and overlay sheets for the production of decorative laminates.