Products

LRBG Chemicals USA UF MW51 is an unfilled, uncatalyzed resin suitable for applications requiring a low viscosity and highly reactive resin. This resin can be cured with catalysts or, in many cases, the acidity of the substrate is enough to cure the resin. Its low viscosity makes it suitable for use with a variety of fillers and extenders.

LRBG Chemicals USA MUF 400PC is a light tan, free-flowing melamine-urea resin powder designed as an adhesive for hot-press or high-frequency wood bonding systems. When used correctly, it provides a waterproof bond and meets the requirements of the ANSI/AITC A190.1-1992 Standard for Structural Glued Laminated Timber. This resin is ideal for high-frequency, high-strength gluing of truck flooring, rail decks, and other laminated wood structures due to its fast cure and low arcing. However, LRBG Chemicals USA MUF 400PC is not suitable for cold-cure applications.

LRBG Chemicals USA MF 817 is a melamine resin powder designed for use where superior penetration is needed to impregnate pattern sheets in the production of decorative laminates to achieve optimal craze resistance. Furthermore, LRBG Chemicals USA MF 817 is highly recommended for use in the manufacture of abrasives, including precision diamond cutting wheels, and has been successfully used as a modifier for phenolic resins in the production of sandpaper.

LRBG Chemicals USA UF 250-S is a pre-catalyzed and filled ready-mix urea resin that is popular with plywood and particleboard manufacturers. It can be used for panels, edge gluing, some decorative lamination, and other applications where a visible glue line is not an issue.

LRBG Chemicals USA MF 860 is a melamine resin in powder form designed for adhesive applications and thermoset paint modification. It can be used as-is, dissolved in water, or a combination of water and alcohol. It is commonly used by the ceiling tile industry to strengthen coatings.

LRBG Chemicals USA MF 819 is a melamine resin powder designed to provide extended solution stability at high concentrations of resin solids. This lends itself to treating applications requiring solution solids of over 55%. For example, a 60% solids solution for saturation of glass cloth to provide good wetting characteristics can be obtained using a 95/5 water-butanol solvent combination. Various types of fillers can be used with the LRBG Chemicals USA MF 819 resin, and other additives and subsequent processing are dependent on the needs of the finished molding compound. It is a neat resin without any additives, fillers, catalysts, or releasing agents.

LRBG Chemicals USA MF 415 is primarily designed for paper lamination but can also be used to impregnate cloth, synthetic, or glass fibers. It serves as a water-resistant thermosetting binder and in compression wood flour molding to make school furniture. Additionally, this resin has been used successfully as a plaster modifier to increase strength and environmental resistance.

LRBG Chemicals USA MF 430 is a fast-curing, plasticized melamine resin powder. It can be used to impregnate and coat paper, cotton, synthetic fibers, glass cloth, and fiber, as well as pattern and overlay sheets for the production of decorative laminates.

LRBG Chemicals USA Melamine appears as a white powder that will form lumps from compaction. It is recommended for use in the manufacture of melamine formaldehyde, amino resins, and fire retardant products. Additionally, this product is listed on the TSCA Inventory.

LRBG Chemicals USA RUFR 1006M is an off-white/yellow latex intumescent fire-retardant polyurethane coating designed as a primer coating for wood and engineered wood composites. When applied and dried, it creates a low-gloss protective primer coating. When exposed to temperatures above 200°C, it creates a multicellular protective char layer that shields the wood substrate beneath it from the fire. This system has excellent adhesion to wood composites and yields low flame spread and smoke development ratings. It may be crosslinked with low levels of polycarbodiimide or melamine/urea crosslinkers to achieve excellent water resistance in the surface coating.

LRBG Chemicals USA UF 313 is a melamine-fortified, internally catalyzed urea formaldehyde powder adhesive designed for the tapeless splicing of veneers with straight-through and cross-feed conventional as well as high-speed splicing machines. LRBG Chemicals USA UF 313 is formulated for applications requiring durability, light color and opacity, and moderate-to-high speed operation. It is characterized by a large operating window, allowing application of the adhesive one day and bonding up to two days later.

LRBG Chemicals USA MF 829 is a melamine formaldehyde resin in powder form designed specifically for the production of NEMA Grade G-9 glass fiber laminates. It is a slightly plasticized resin that does not contain any reaction catalyst ions to carry electrical charges. This resin is used in glass fabric laminates that require NEMA Grade 9 electrical performance.

LRBG Chemicals USA S 313 is a melamine-fortified, internally catalyzed UF powder adhesive designed for tapeless splicing of veneers with straight-through and cross-feed splicing machines. It has the ability to control intermediate components at the manufacturing level. This adhesive is lightly pigmented, and its color can easily be adjusted to any desired tint.

LRBG Chemicals USA S 203 is a urea-formaldehyde splicing powder that has been dried by atomization glue. It appears as a free-flowing white powder and forms a crust on the surface when exposed to humidity in the air. This product has a slight formaldehyde odor. It can be used in hot press or radio frequency curing for wood veneer splice adhesives.

LRBG Chemicals USA MF 304PCB is a pre-catalyzed melamine resin in powder form designed primarily for adhesive applications. It can be used as received, dissolved in water or combinations of water and alcohol, or as a fortifier for UF liquid resins.

LRBG Chemicals USA MUF 400-15 is a melamine urea formaldehyde resin spray-dried powder, appearing as a tan to white free-flowing powder. It forms a crust on the surface by absorbing moisture from the air. This powdered resin can be used in container wood flooring adhesive, wood adhesive, and compression molding of wood articles.

LRBG Chemicals USA MUF400 is a resin binder used for flooring in hot press or high-frequency systems. It meets the commercial standard spec. SC253-63 and has a fast cure and low electrical arcing. It is used extensively by laminated truck flooring and container flooring manufacturers worldwide.

LRBG Chemicals USA 203 M is a urea-formaldehyde splicing powder that is dried by atomization glue. It appears as a free-flowing white powder that forms a crust on the surface when exposed to humidity in the air. This product has a slight formaldehyde odor. It can be used in hot press or radio frequency curing for wood veneer splice adhesives.

LRBG Chemicals USA MF 412 is a fast-curing, plasticized melamine resin powder designed for use in a water solution to impregnate pattern and overlay sheets for the production of decorative laminates with excellent post-forming characteristics. When heavily catalyzed, it also works well for low-pressure lamination.

LRBG Chemicals USA MF 812 is a spray-dried melamine resin powder designed as a binder for granulated wood and wood flour to produce high-flow molding composites. This resin is light-colored, and it demonstrates excellent resistance to color change upon UV exposure.

LRBG Chemicals USA S 315 is an extremely versatile, internally catalyzed urea formaldehyde powder adhesive system designed for tapeless splicing of veneers on a wide variety of machines. Together with the retarder R-12, the adhesive can be tuned to bond virtually any species on machines with press times ranging from sub-seconds to minutes. LRBG Chemicals USA S 315 is one of the lightest-colored, opaque splicer adhesives on the market, allowing on-site color matching to any veneer.

LRBG Chemicals USA UF 253 is a catalyzed, non-filled urea resin powder suitable for various bonding applications with cellulosic substances. It is recommended as a binder for wood, particle board, chip board, and other materials where a clear glue line is desired.

LRBG Chemicals USA MUF 400-6 is a melamine -urea formaldehyde resin spray-dried powder. It appears as a tan to white, free-flowing powder that forms a crust on the surface when exposed to moisture in the air. This powdered resin can be used in container wood flooring adhesives, wood adhesives, and for the compression molding of wood articles.

LRBG Chemicals USA MF 836 is a fast-curing melamine resin powder designed specifically for impregnating overlay paper used in the manufacture of decorative laminates. It provides high gloss with improved transparency and is recommended for use at 50% solids for paper saturation. Additionally, it is a heavily plasticized melamine resin for overlay paper and decorative laminates that require some flexibility.

LRBG Chemicals USA Catalyst AD-5895 is a custom-designed catalyst used to help manage time. It appears as a tan to brown solid in powder form and is recommended for use as a catalyst for curing resin mixtures with MUF400 powder. This product is listed on the TSCA Inventory.

LRBG Chemicals USA UF RW-25 is an unfilled, uncatalyzed adhesive and binding resin that is suitable for a variety of applications, such as wood, cellulosic substances, and foundry sand. It can be cured using only heat or with the addition of a catalyst, which will shorten the cycle time. Increasing the catalyst content will result in a cold-cure wood glue.

LRBG Chemicals USA S 440 is an internally catalyzed urea formaldehyde powder adhesive system designed for tapeless splicing of veneers on a wide range of machines. It has a fast curing speed and a long carry time after application when the ambient temperature is below 70 - 75°F.

LRBG Chemicals USA MF 304 is a spray-dried melamine powder resin used as a wood bonding adhesive that fortifies urea resin to increase the environmental and moisture resistance of plywood and particle board. It is also used to strengthen ceiling tiles to prevent sagging.

LRBG Chemicals USA Catalyst I-25 powder is specifically designed for use with their melamine urea powder resin, MU 400. When blended with MU 400, it extends the working pot life and accelerates the set time under heat. This catalyst is ideal for high-frequency gluing applications such as truck trailer flooring, rail decks, and other laminated structures.