Products

Tykote 6160 is a flexible acrylic emulsion designed to provide a good balance of Cobb resistance, OGR, and MVTR properties from coatings made with it. Films and coatings made from Tykote 6160 also have good flexibility. Tykote 6160 demonstrates the ability to be applied via all typical methods used to apply barrier coatings, including rod, blade, and flexo or gravure presses. Request the Tykote Products for Excellence in Barrier Coatings bulletin to learn more.

Rovene 4100 is a styrene-butadiene emulsion polymer recommended for use for boxboard coating, in some publication grade papers and in the adhesive industry. Rovene 4100 may be used in adhesive and paper coating applications where FDA clearance is needed. Regulatory Status Detailed FDA 21 CFR compliances are available upon request.

Rovene 6104 is a very soft, film forming vehicle that provides good water and rub resistance for flexographic and gravure inks and overprint varnishes. Rovene 6104 can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes providing good gloss. The emulsion can also be used as the non-skid component in formulations. Because of the low glass transition temperature, Rovene 6104 has good adhesion to treated flexible films. Inks and overprint varnishes formulated with Rovene 6104 can be formulated with graphic arts industry standard products and additives.

Rovene 4111 is a high glass transition temperature styrene-butadiene emulsion designed to provide additional opacity in inks, specifically inks formulated with titanium dioxide. Rovene 4111 was designed with a specific particle size that greatly improves the spacing between titanium dioxide particles resulting in increased opacity. Additionally, using Rovene 4111 may allow a formulator to reduce the level of titanium dioxide in an ink formulation.

Rovene 6202 is a solution version of Rovene 6201 solid styrene-acrylic resin neutralized with ammonia hydroxide. Rovene 6202 is a general use resin solution that is used as a grinding resin to produce pigment dispersions. The solution can also be used as an additive to modify certain properties of an ink or overprint varnish. The addition of Rovene 6202 will increase gloss, increase block resistance and improve resolubility on press. The solution can also be crosslinked due to the carboxyl functionality of the styrene-acrylic resin.

Rovene 6204 is a 34% solids solution version of Rovene 6201 styrene-acrylic resin neutralized with ammonia hydroxide. It can be used as a pigment dispersant resin and as a modifying additive in inks or overprint varnishes. Rovene 6204 is a general use resin solution that is used as a grinding resin to produce pigment dispersions. The solution can also be used as an additive to modify certain properties of an ink or overprint varnish. The addition of Rovene 6204 will increase gloss, increase block resistance and improve resolubility on press. The solution can also be crosslinked due to the carboxyl funcationality of the styrene-acrylic resin.

Rovene 97982 is a very soft acrylic suggested as a base resin in flexible packaging laminating adhesives. Rovene 97982 provides excellent clarity and UV stability, high tack and peel, and medium shear. Rovene 97982 also has good adhesion to low surface energy substrates.

Rovene 6106 is a low viscosity but high solids letdown emulsion for paper and paper board substrates. The combination of the polymer design and high solids give inks formulated with Rovene 6106 very fast drying and excellent printability. The high solids, low viscosity, and fast drying characteristics are well suited for high speed gravure printing as well as flexographic printing.

Rovene 6091 is a functionally modified vinyl acetate copolymer latex recommended for use as a water-based release coating. As a water based release coating, Rovene 6091 is recommended for use with adhesives exhibiting a high degree of tack. Rovene 6091 is recommended as a blending component for Rovene 6090 to modify the degree of adhesive release. This fast drying, firm copolymer has excellent mechanical stability during application and provides a final coating with easy release. Features: Firm hand High riding Fast drying Low TMLI release values (easy release) Excellent mechanical stability

Rovene 6090 is a functionally modified, water-based vinyl acetate copolymer latex. As a water-based release coating, Rovene 6090 is recommended as a blending component for Rovene 6091 to modify the degree of adhesive release. On its own, this fast drying, firm copolymer has excellent mechanical stability during application and provides a final coating with very tight release values. When combined with Rovene 6091, release values can be easily tailored to specific needs. Features: Firm hand High riding Fast drying High TMLI release values (tight release) Excellent mechanical stability

Rovene 6201 is an alkali soluble styrene-acrylic resin with a mid-range molecular weight supplied in a clear pellet form. Rovene 6201 is a general use resin for overprint varnishes, water based inks and pigment dispersions. Rovene 6201 provides excellent ink transfer and printability with high gloss.

Rovene 4076 is a medium-firm, carboxylated styrene-butadiene emulsion recommended for use in architectural coatings and interior primers for dry wall application where low perm ratings are required. Rovene 4076 is designed to exhibit tight, continuous films providing the following performance advantages: moisture vapor barrier properties, superior cold temperature coalescence, and ASTM E-96 perm ratings of ~0.5.

Rovene 5499 is a film forming styrene-butadiene emulsion that was developed as an ink vehicle for thermoplastic polyolefin (TPO) based wall coverings. More specifically it can be formulated for metallic ink vehicles. Rovene 5499 provides inks with excellent adhesion to TPO wall covering substrates and good alkaline resistance properties.

Rovene 4423 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label adhesives and flooring adhesives. This polymer emulsion allows for the formulation of permanent label adhesives which are high in peel and tack, yet require a minimum amount of tackifier. However, it provides good tack on its own, thus minimizing the amount of tackifer required. Rovene 4423 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers. Rovene 4423 can also be blended with natural latex for high shear tape adhesives and for use in special contact adhesive applications.

Rovene 4813 is a very soft non-carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives. Rovene 4813 is a high gel content, hot polymerized latex designed with excellent shear stability and high tolerance for fillers and pH shock. Its soft films yield adhesives with good tack and no adhesion build for use in removables. Rovene 4813 is easily tackified and gives high peel and shear strengths in adhesives and mastics. This product is also sprayable.

Rovene 6103 is a soft, film forming vehicle that provides good water and rub resistance for flexographic and gravure inks and overprint varnishes. Rovene 6103 can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes providing excellent gloss. The emulsion can also be used as the nonskid component in formulations. Because of the low glass transition temperature, Rovene 6103 has good adhesion to treated flexible films. Inks and overprint varnishes formulated with Rovene 6103 can be formulated with graphic arts industry standard products and additives.

Rovene 8305 is a high gel content, non-carboxylated styrene-butadiene emulsion recommended for flooring adhesives. These adhesives can be formulated to require exceptional uncured shear strength, pH tolerance and water resistance. Rovene 8305 can be greatly extened with oils and fillers in high solids formulations. Compatibility with commerical tackifier resins is excellent, as is filler tolerance. Dry films offer excellent water resistance, adhesion and high shear strength.

Rovene® 6114 is a low glass transition temperature, acrylic polymer emulsion with improved oil & grease resistance. It is a very soft film forming vehicle that provides good gloss, excellent water and rub resistance, and non-skid properties for flexographic and gravure inks and overprint varnishes. Rovene 6114 can be used as the film forming component in overprint varnishes or as the sole vehicle for inks and overprint varnishes. Because of the low glass transition temperature, Rovene 6114 has good adhesion to treated flexible films. Inks and overprint varnishes can be formulated with graphic arts standard products and additives.

Rovene 6005 is a very soft acrylic, high molecular weight latex emulsion specifically designed for formulation of pressure sensitive permanent label adhesives. Its high molecular weight allows the formulation of permanent label adhesives which are high in peel and tack, yet require a minimum amount of tackifier. Rovene 6005 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers. Rovene 6005’s high molecular weight also provides improved wet crock of inks printed on nonwoven and textile substrates in the Printing and Packaging market.

Rovene 6105 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives. It can be formulated into a pressure sensitive adhesives that requires a minimum amount of tackifier. Rovene 6105 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers.

Rovene 6115 is a hard, non-film forming vehicle that is neutralized with sodium hydroxide for flexographic and gravure inks and overprint varnishes primarily for use on paper and paperboard substrates. Inks formulated with this emulsion exhibit excellent ink transfer as well as exceptional resolubility on press with low odor. Inks and overprint varnishes formulated with Rovene 6115 dry fast, clean up easily on press, and can be easily formulated with graphic arts industry standard products and additives.

Rovene 6130 is a very soft, self crosslinking, carboxylated styrene-butadiene emulsion specifically designed for formulation of masking and carton sealing tape adhesives. It exhibits excellent compatibility with a wide range of dispersed tackifiers and may be combined with natural latex to give the desired balance of tack, peel and shear. Rovene 6130 had found wide use in General Purpose paper label adhesives as well as some use in investment casting.

Rovene 4848 is a very soft non-carboxylated styrene-butadiene emulsion specifically designed for the use in a two part spray adhesive for open or closed cell foams and other contact and cold seal applications. Rovene 4848 has fast break characteristics that may allow it to be used in specially formulated one part spray adhesives. Rovene 4848 has found applications in two part foam-to-foam, one and two part fast breaking spray up adhesives, and special contact or cold seal applications in combination with polychloroprene and natural latex. When working with Rovene 4848 it is important to remember that it may be tackified, thickened and blended with other non-carboxylated and carboxylated emulsions. This flexibility allows for the formulating of a wide variety of adhesives with custom performance properties.

Rovene 4305 is a styrene-butadiene emulsion polymer recommended for non-woven and textile applications that require a soft yet strong backcoating. It gives good adhesion to polyester as well as cellulosic substrates. Rovene 4305 offers outstanding water and solvent resistance especially when formulated with external crosslinkers.

Rovene 5044 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label and construction adhesives. It is used in the formulation of permanent label and construction adhesives which are high in peel and tack, and thus require a minimum amount of tackifier. Rovene 5044 was designed to give excellent performance and compatibility with a wide variety of tackifiers.

Rovene 4009 is a carboxylated styrene-butadiene emulsion that has a medium hand with above average strength properties. This latex has the ability to be crosslinked with external crosslinking agents. Rovene 4009 can be compounded into highly water and grease resistant paper and board coatings. It exhibits an excellent balance of water resistance, grease and oil resistance, and low moisture vapor transmission. Rovene 4009 is recommended for applications in specialty paper coatings where water, grease and oil resistance is needed.

Tykote 1005 is a styrene-butadiene emulsion polymer designed as a base resin for functional barrier coatings. Tykote 1005 provides high strength and pigment compatibility. This low surfactant containing copolymer can be used to compound functional coatings exhibiting superior water and water vapor resistance. This firm polymer also gives rise to blocking resistant coatings. Tykote 1005 exhibits excellent mechanical stability and can be applied to a variety of substrates using many different application methods. Request the Tykote Products for Excellence in Barrier Coatings bulletin to learn more. Regulatory Status Detailed FDA 21 CFR compliances are available upon request.

Tykote 1019 is a carboxylated styrene-butadiene emulsion that has a firm hand with excellent film strength properties. It is intended for use as a base polymer in the formulation of barrier coatings for paper and paperboard packaging. Tykote 1019 imparts excellent water resistance, and has good adhesion to a wide variety of surfaces. Tykote 1019 is recommended for use in paper and paperboard coatings where a high degree of water and water vapor resistance is needed. It may also be formulated into barrier laminating adhesives for paper-to-paper, paper-to-film, and foil-to-paper. Request the Tykote Products for Excellence in Barrier Coatings bulletin to learn more. Regulatory Status Detailed global food contact compliances are available upon request. Tykote 1019 is synthesized to meet European regulatory requirements.

Tykote 6152 is a hard film forming styrene-acrylic emulsion designed for oil and grease resistant barrier coatings. This product also provides excellent water and blocking resistance in barrier coating compounds. Tykote 6152 also demonstrates the ability to be applied via all typical methods used to apply barrier coatings, including rod, blade, and flexo or gravure presses.

Rovene 6112 is a hard, film forming, low glycol and VOC vehicle with a moderately low glass transition temperature for flexographic and gravure inks and overprint varnishes. Rovene 6112 exhibits good water and grease resistance. This polymer allows formulating for film integrity and flexibility without adversely affecting the blocking resistance of the inks and overprint varnishes. Inks and overprint varnishes formulated with Rovene 6112 can be easily formulated with graphic arts industry standard products and additives.

Rovene 6111 is a low glycol and VOC styrene-acrylic resin supported emulsion. It is a general purpose, hard, non-film forming emulsion for flexographic and gravure inks and overprint varnishes. Rovene 6111 can be used as a letdown vehicle for paper and paperboard substrates that exhibit excellent hold out and high gloss. Inks formulated witht this emulsion exhibit excellent ink transfer and resolubility on press. Inks and overprint varnishes formulated with Rovene 6111 dry fast, clean up easily on press, and can be easily formulated with graphic arts industry standard products and additives.

Rovene 4002 is a medium-firm, carboxylated styrene-butadiene emulsion designed to have good freeze-thaw stability and low odor characteristics, when used in trade sales coatings. When properly formulated, coatings based on Rovene 4002 exhibit tight, continuous films providing the following performance advantages: moisture vapor barrier properties, enamel holdout at higher PVC's than conventional latexes, superior cold temperature coalescence, stability to alkaline substrates and ASTM E-96 perm ratings of ~0.5.

Tykote 1004 is a styrene-butadiene emulsion polymer designed as a base resin for functional coatings. Tykote 1004 provides high strength and pigment compatibility. This low surfactant containing copolymer can be used to compound functional coatings exhibiting superior water, water vapor, oil and grease repellency. Tykote 1004 exhibits excellent mechanical stability and can be applied to a variety of substrates using many different application methods. Request the Tykote Products for Excellence in Barrier Coatings bulletin to learn more. Regulatory Status Detailed FDA 21 CFR compliances are available upon request.

Rovene 4106 is a carboxylated, styrene-butadiene emulsion that can be used to enhance gloss on coated printing papers and paperboard. It is recommended as a modifier for nonwoven and textile binders to increase strength and/or reduce tack as it has a very stiff or 'boardy' hand. It may also be used as an additive to a paperboard packaging barrier coat to improve stiffness and reduce blocking tendency.

Rovene 4044 is an APEO free, very soft styrene-butadiene emulsion designed for formulation of construction adhesives. Rovene 4044 has high peel and tack, and thus requires a minimum amount of tackifier when used in formulated adhesives