Products

Mascoat® 450EN is to be used under insulating coatings or conventional insulation in highly corrosive environments. It is designed to provide CUI protection per NACE SP0198. When used under insulation, 450EN offers outstanding resistance to wet & dry cycling at high temperatures up to 450°F. The coating can be used on steel for offshore platforms, barges, refineries, petrochemical plants, power plants, pulp & paper mills, and many other areas as recommended. The coating can also be used to line steel tanks at a higher film thickness.

Mascoat® 200UTC is a high-build, high-performance polyester urethane topcoat. It is designed to be used as a finish coat for our line of insulating coatings where long-term color and gloss retention is desired.

Mascoat® 400DFP is a hi-temp dry fall silicone copolymer primer designed for heated substrates up to 400°F. The one-part coating’s dry fall properties allow it to dry to a powder within 10 - 20 feet from point of application, allowing it to safely be used in areas where overspray damage to nearby cars and equipment would be a concern. It offers maximum adhesion and corrosion protection even in limited surface preparation areas and does not require a heat cure. Engineered specifically for heavy industrial equipment, M-400DFP may be used on any service area ranging from ambient to 400°F for premium corrosion protection.

Mascoat® 250P is a high solids aluminum epoxy mastic primer that provides excellent corrosion protection over marginally clean substrates up to 250°F. It is intended for use under Mascoat’s insulating coatings, but can also be top-coated with epoxies and/ or polyurethanes. It is predominantly used on structural steel, steel tanks, barges, refineries, petrochem plants, power plants, railcars, pulp & paper mills, and other facilities as recommended.

Mascoat® Industrial-DTI is a coating comprised of proprietary air-encapsulated particulates that provides a thermal insulation barrier, protects personnel and blocks corrosion all in one application. The coating is specifically designed to be a multiple-purpose coating solving painting and insulating issues.

Mascoat® 600P is a premium, silicone copolymer high-heat coating effective on steel surfaces operating up to 600°F. The VOC-compliant coating may be used direct-to-metal or top-coated with a variety of Mascoat’s insulating coatings or topcoats, as specified. The product can be top-coated in 2 hours and put into service in just 12 hours.

Mascoat® Transportation-DTA is a composite ceramic insulation coating that provides an insulating barrier, protects personnel and blocks corrosion all in one application. The coating is specifically designed to be a multiple-purpose coating, solving painting and insulating issues.

Mascoat® Industrial-HR is a coating comprised of proprietary air-encapsulated particulates with highly reflective properties that provides an insulating barrier, reduces solar loading, and prevents corrosion all in one application. The coating is specifically designed to be a multiple purpose coating solving painting and insulating issues.