Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features & Benefits
- 1.6A:1B volume mix ratio
- Extremely high compressive and tensile strength
- Excellent adhesion to a wide variety of substrates including metals, composites, glass, ceramics, and many plastics
- Excellent electrical insulating characteristics
- Very broad service temperature range of -40 to 225 °C
- Extreme resistance to water and humidity
- Solvent-free
- Recommended Preparation
- Clean the substrate with Isopropyl Alcohol, MG #824, so the surface is free of oils, dust, and other residues.
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
Properties
- Typical Properties
- Cured Properties
- Uncured Properties
- Cure Instructions
Allow to cure at room temperature for 24 hours, or cure in an oven at one of these time/temperature options:
Temperature 65 °C 80 °C 100 °C Time 1 h 30 min 15 min
Value | Units | Test Method / Conditions | |
Mix Ratio | 2:1 | Weight | — |
Mix Ratio | 1.6:1 | Volume | — |
Working Time | 1 | h | — |
Value | Units | Test Method / Conditions | |
Breakdown Voltage | min. 50,000 | V | — |
Compressive Strength | 132 | N/mm2 | — |
CTE (After Tg) | 152 | ppm/˚C | — |
CTE (Prior Tg) | 86 | ppm/˚C | — |
Dielectric Constant (at 1 MHz) | 2.8 | — | — |
Dielectric Strength | 470 | V/mil | — |
Dissipation Factor (at 1 MHz) | 0.01 | — | — |
Glass Transition Temperature (Tg) | 89 | °C | — |
Hardness D | 87 | — | — |
Intermittent Temperature | 250 | ˚C | — |
Lap Shear (Aluminum) | 7.4 | N/mm2 | — |
Lap Shear (Stainless Steel) | 15 | N/mm2 | — |
Resistivity | 1.0 x 10¹³ | Ω·cm | — |
Service Temperature Range | -40 to 225 | ˚C | — |
Tensile Strength | 48 | N/mm2 | — |
Thermal Conductivity (at 25˚C) | 0.3 | W/(m·K) | — |
Value | Units | Test Method / Conditions | |
Mixed Density | 1.1 | g/mL | — |
Viscosity (at 25 ˚C) ⁽ᵃ⁾ | 46 | Pa·s | — |
Viscosity (at 25 ˚C) ⁽ᵇ⁾ | 6.6 | Pa·s | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Mixing
- Scrape settled material free from the bottom and sides of the part A container; stir the contents until homogenous. Use a paint shaker if available.
- Measure 2 parts by volume of the part A and pour into the mixing container. Ensure all contents are transferred by scraping the container.
- Measure 1 part by volume of the part B and pour into the mixing container. Ensure all contents are transferred by scraping the container.
- Thoroughly and gently mix parts A and B together. Avoid introducing air bubbles.
- To de-air, let sit for 15 minutes or put in a vacuum chamber at 25 inHg for 2 minutes.
- If bubbles are present at the top, break them gently with the mixing paddle.
- Pour the mixture into a container holding the components to be protected.
- Close the part A and B containers tightly between uses to prevent skinning.
- Viscosity vs. Temperature
Packaging & Availability
- Available Packaging
Cat. No. Packaging Net Vol. Net Wt. 832HT-375ML 2 Bottle kit 340 mL 376 g 832HT-3L 3 Can kit 2.3 L 2.54 kg
Storage & Handling
- Shelf Life
- 5 Years
- Storage and Handling
- Store between 16 and 27 ˚C in a dry area, away from sunlight (see SDS).