Products

SymaLITE is a special class of lightweight composites that offer low thermal expansion and exceptional mechanical and physical properties. Made from mixed glass and polymer fiber fleeces, SymaLITE is available in rolls and boards, which can be further molded into three-dimensional components using low-pressure molding.Features:Low thermal expansionExcellent mechanical and physical propertiesUltra-light and freely shapeableNoise-absorbentDirect facing with functional or decorative cover layers without adhesivesBenefits:Cost-efficient production of three-dimensional componentsDurable and noise-insulating material for car undershields and engine coversImpact-resistant and non-weathering for outdoor applications in the automotive and construction industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.Applications:Automotive and caravan industryConstruction sectorCar headlinersOutdoor applications in the automotive and caravan industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.

Semitron® ESd 410C PEI Polyetherimide electro static dissipative shapes are the perfect solution for semiconductor and electronics handling environments. These shapes offer exceptional dimensional stability and can withstand temperatures up to 410º F without degradation. The unique properties of Semitron® ESd 410C PEI make it ideal for a wide range of applications, including handling tray, circuit board, hard disk drive, and sensitive processing equipment applications.Features:Surface resistivity of 104 - 106 ohms/sq.Thermal performance to 210 °C (410 °F)Low stress for tight tolerance machiningHigh strength and stiffnessBenefits:Excellent dimensional stabilityResistant to high temperaturesLow stress for tighter tolerances during machiningReduced coefficient of linear thermal expansionMinimal water absorptionApplications:Handling Trays: Trays manufactured from Semitron® ESd 410C dissipate static charges reliably and are dimensionally stable. (Prior materials: PPS, PEEK, Vespel® PI)Circuit Boards: Semitron ESd 410C is ideal for use in circuit boards as it offers excellent dimensional stability and can withstand high temperatures without degradation.Hard Disk Drives: Semitron ESd 410C is an ideal material for use in hard disk drives due to its high strength, low stress properties and exceptional dimensional stability.Sensitive Processing Equipment: Semitron ESd 410C offers low stress properties, minimal water absorption and high strength making it an ideal choice for use in sensitive processing equipment.

Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Duratron® T4503 PAI Polyamide-imide is a compression molded material that offers exceptional electrical insulation properties and excellent dimensional stability. This grade is often selected for extreme applications where large geometries are required, such as dies or thermal insulators. It has a similar composition to Duratron® T4203 PAI and is known for its high compressive strength, elongation, and impact resistance.Features:Outstanding electrical insulation propertiesExcellent dimensional stabilityHigh compressive strength and elongationImpact resistanceBenefits:Suitable for extreme applications such as dies and thermal insulatorsCan be used for large geometriesCan be used for electrical connectors and insulatorsApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearHigh Temperature Electrical ConnectorsBearing CagesCan Mandrel

Duratron® U2300 PEI, a flame resistant Polyetherimide that offers exceptional rigidity, strength, dimensional stability, and heat resistance. With 30% glass-reinforcement, Duratron® U2300 PEI is the most durable and high-performance plastic offered in the Duratron® PEI line.Features:30% glass-reinforced for highest rigidity, strength, dimensional stability, and heat resistanceFlame resistantLowest Coefficient of Linear Thermal ExpansionSuperior strength-to-weight ratio and tensile strengthBenefits:Ideal for reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, and structural components that require high strength and rigidity at elevated temperaturesCan withstand harsh conditions and high temperaturesSuitable for a wide range of applicationsApplications:Reusable medical devicesAnalytical instrumentsElectrical insulatorsSemiconductor process componentsStructural components that require high strength and rigidity at elevated temperaturesDuratron® U2300 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions and high temperatures. Whether you are looking to improve the performance of your reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, or need a material that can withstand high temperatures and harsh environments, Duratron® U2300 PEI is the ideal solution. Try it today and experience the difference for yourself!

Nylatron® 703 XL, a unique, ultra-high performance bearing grade made from Polyamide PA6. This material offers exceptional wear resistance, even better than Nylatron® NSM, while also providing superior load bearing capabilities and a near zero level of stick-slip.Features:Ultra-high performance bearing gradeBetter wear resistance than Nylatron® NSMSuperior load bearing capabilitiesNear zero level of stick-slipBenefits:Provides an extraordinary amount of motion control for high-precision applicationsElimination of stick-slip improves performance in high-precision applicationsIdeal for wear-intensive applicationsApplications:Wear padsConveyor componentsCorner tracksPneumatic control surfacesConstruction and heavy equipment marketsMade from a high performance cast nylon 6, Nylatron 703 XL is suitable for heavy-duty, high-load and high-speed applications where the highest level of wear resistance and load-bearing capabilities are required. It offers improved performance and longer service life than other materials. It is a cost-effective solution for construction, heavy equipment and other industrial markets that demand high-performance and durability.

Ketron® CM CA30 Polyetheretherketone PEEK, a compression-molded, 30% carbon fiber-reinforced grade that offers exceptional impact, corrosion, chemical, and wear resistance. This black-colored material is designed for applications where high strength, stiffness, and thermal conductivity are needed. Features: 30% carbon fiber reinforced for added strength and stiffness Outstanding impact, corrosion, chemical, and wear resistance Reduced thermal expansion for improved performance High thermal conductivity for rapid heat dissipation Suitable for large parts and bearing applications Benefits: Extends the life of components by resisting wear and corrosion Improves pressure-velocity capabilities and bearing life by dissipating heat faster Provides 3.5 times higher thermal conductivity compared to unreinforced PEEK Offers even higher stiffness, mechanical strength, and creep resistance than Ketron GF30 PEEK Applications: Bearing applications Large parts Automotive industry Aerospace industry Medical industry Industrial machinery Chemical processing Ketron® CM CA30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your bearing applications, need a strong and stiff material for large parts or are in the automotive, aerospace, medical, industrial machinery or chemical processing industries, Ketron® CM CA30 PEEK is the ideal solution.

Ketron® Sterra™ CA30 PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance than Ketron GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Duratron® U2200 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional rigidity, dimensional stability, high temperature resistance, and a low Coefficient of Linear Thermal Expansion. With 20% glass-reinforcement, Duratron® U2200 PEI is a versatile and durable material that is suitable for a wide range of applications.Features:20% glass-reinforced for exceptional rigidity and dimensional stabilityHigh temperature resistanceLow Coefficient of Linear Thermal ExpansionExceptional strength-to-weight ratio and increased tensile strengthGreat electrical insulatorBenefits:Versatile and durable material that can withstand harsh conditionsIdeal for semiconductor and electronics applications where dimensional stability, low thermal expansion and electrical insulation is importantSuitable for a wide range of applicationsApplications:Semiconductor and electronics applicationsElectrical insulationApplications that require dimensional stability, high temperature resistance and low thermal expansionDuratron® U2200 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your semiconductor and electronics applications or need a material that can withstand high temperatures and harsh environments while providing electrical insulation, Duratron® U2200 PEI is the ideal solution.

Techtron® 1000 PPS is a high-performance polymer known for its excellent dimensional stability, chemical resistance, and easy machinability. It is a unfilled grade of Polyphenylene Sulfide (PPS) and is ideal for a wide range of applications where precision and durability are required.Key features:Outstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion make it easy to maintain tight tolerances.Easy machinability: this material can be machined to close tolerances, making it suitable for precise components.Corrosion resistance: due to its chemical resistance, this material is ideal for use in corrosive environments.Benefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals and moistureEnhanced precision and dimensional stabilityImproved machinability and tight tolerance controlApplications:Structural parts in corrosive environments such as chemical processing and oil and gas industry.Precision components and machine parts that require dimensional stability, wear and chemical resistanceElectrical components, as it has good electrical insulation and dielectric properties.Automotive and aerospace components as it can withstand high temperatures.Techtron® 1000 is a versatile and reliable material that can help improve the performance and longevity of your products, it's available in a range of shapes and sizes, making it easy to incorporate into your designs.

Nylatron® FST Polyamide PA66 is a fire, smoke, and toxicity retardant engineering plastic that is designed to withstand extreme temperatures up to 347° F / 175° C. This grade is JAR / FAR 25.853 compliant, making it the first engineering plastic to achieve this standard. It is specifically developed for aircraft interior environments and is often used as a replacement for metal parts in various applications such as brackets, seal bushings, slide rails, and duct seals.Features:Fire, smoke, and toxicity retardantWithstands temperatures up to 347° F / 175° CJAR / FAR 25.853 compliantBenefits:Provides superior fire safety for aircraft interior environmentsCan withstand extreme temperatures, making it suitable for high-temperature applicationsMeets industry standards for fire and smoke safety, making it a reliable and safe choice for various applicationsApplications:Aircraft interior environmentsBracketsSeal bushingsSlide railsDuct sealsOther high-temperature and fire safety applications.

Ketron® Sterra™ 1000 PEEK is an unfilled, general-purpose grade known for its exceptional elongation and toughness. It is ideal for instrument and seal components, where ductility and inertness are crucial. Ketron® Sterra™ 1000 PEEK portfolio, featuring recycled content for a reduced carbon footprint compared to non-recycled materials.

Acetron® POM-H / Ertacetal® H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, and hardness, making it the ideal choice for a wide range of demanding applications. Its superior creep resistance and low thermal expansion rate make it stand out from copolymer acetal grades, making it the go-to material for small diameter, thin-walled bushings, bearings, gears, electrical components, medical and diagnostic equipment, valves, and fluid handling components.Features:Superior mechanical strength, stiffness, and hardnessExceptional creep resistanceLow thermal expansion rateHigh wear resistanceBenefits:Durable and long-lasting performanceEasy installation and removal with minimal distortionHigh resistance to chemical wearHigh impact strength, even at low temperaturesExcellent dimensional stabilityApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components

Nylatron® GS PA66 is a premium grade of Polyamide PA66, reinforced with Molybdenum Disulphide (MoS2) to enhance its mechanical properties. This unique combination of materials offers outstanding strength, rigidity, and a lower coefficient of linear thermal expansion than other nylon products.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Maintains fits and clearances, reducing the likelihood of seizing as bearingsEnhanced bearing and wear properties due to MoS2Excellent performance in high-precision applicationsApplications:Ideal for use in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats, and seals in construction and heavy equipment industries.Can also be used in other high wear and load-bearing applications.Nylatron® GS PA66 is a superior choice for applications that require high strength, rigidity and wear resistance, making it a perfect solution for construction and heavy equipment industries.

Techtron® PSBG is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added strength and durability of carbon fiber reinforcement. This compression-molded material is internally lubricated and designed to excel in wear applications where an electrically conductive material is required.Key features:Excellent wear resistance: internally lubricated and carbon fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesExtreme chemical and corrosion resistance: ideal for use in demanding environmentsLow coefficient of linear thermal expansion: making it suitable for applications where dimensional stability is criticalElectrically conductive: ideal for wear applications that require electrical conductivityBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion and wearEnhanced precision and dimensional stabilityImproved electrical conductivityApplications:Bushings and bearings, lantern rings, and pump wear components in the oil and gas industryElectrical components as it is electrically conductiveAutomotive and aerospace components as it can withstand high temperatures.Wear-resistant components in general, as it is internally lubricated and reinforced with carbon fiberTechtron® PSBG is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, making it easy to incorporate into your designs.

Duratron® T4501 PAI Polyamide-imide is a high-performance plastic known for its exceptional compressive strength and excellent wear resistance. This grade is ideal for general purpose wear and friction applications, and is able to endure harsh thermal, chemical, and stress conditions.Features:High compressive strengthExcellent wear resistanceAble to endure harsh thermal, chemical, and stress conditionsSimilar in composition to Duratron® T4301 PAIAvailable in larger shapes or componentsBenefits:Can carry more loadReliable solution for general purpose wear and friction applicationsSuitable for a wide range of applications that require high strength and durabilityApplications:General purpose wear and friction partsLarge shapes and componentsApplications that require high strength and durability such as industrial machinery, automotive and aerospace.

Ertacetal® H / Acetron® H Polyoxymethylene POM-H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, hardness, and creep resistance, making it the perfect choice for a wide range of demanding applications.Features:Superior mechanical properties that allow the use of standard fastenersExcellent stability and machining properties that reduce machining costsDurable material that allows for easy installation and removal with minimal distortionHigh chemical resistance for a long service lifetimeHigh impact strength, even at low temperaturesExcellent dimensional stability with low water absorptionBenefits:Reduced machining costs and improved efficiency in manufacturingLong-lasting and durable components that can withstand demanding conditionsEasy installation and removal, even in tight spacesHigh chemical resistance ensures a long service lifetimeHigh impact strength, even at low temperatures, ensures reliable performance in any environmentExcellent dimensional stability ensures consistent and accurate resultsApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components

Duratron® T4301 PAI Polyamide-imide is a high-performance plastic that offers exceptional properties for severe service wear applications. The addition of PTFE and graphite provides this grade with improved wear resistance and dimensional stability, making it an ideal solution for non-lubricated bearings, seals, bearing cages, and reciprocating compressor parts.Features:Very low expansion rate and coefficient of frictionLittle to no slip-stick in useExcellent dimensional stability over a wide temperature rangeHigh flexural modulus of 1,000,000 psiHigher wear resistance compared to unfilled Duratron® T4203 PAI gradeBenefits:Allows for increased bearing speeds and extended part lifeCan be used in severe service wear applicationsIdeal for non-lubricated bearings, seals, bearing cages, and reciprocating compressor partsApplications:Bearings and bearing cagesSealsReciprocating compressor partsOther severe service wear applicationsCompression-molded Duratron T4501 PAI is similar in composition to Duratron T4301 PAI, and is selected when larger shapes are required. Prior materials for these applications include steel cages, hardened steel balls, and bronze bushings. Duratron T4301 PAI (colour: black) also offers excellent dimensional stability over a wide temperature range.

Duratron® T5530 PAI is a high-performance, glass-reinforced polyamide-imide material that offers exceptional rigidity, retention of stiffness, low thermal expansion, and outstanding load-carrying capabilities. This 30% glass-reinforced grade is ideal for structural applications in the semiconductor, electronics, and aerospace industries, where high strength, stiffness, and dimensional stability are required.Features:High rigidity and retention of stiffnessLow thermal expansionOutstanding load-carrying capabilities30% glass reinforced for added strength and stiffnessBenefits:Suitable for structural applications in harsh environmentsOffers exceptional dimensional stability up to 260°CIdeal for precision parts in the electronic and semiconductor industriesApplications:Aerospace and defenseSemiconductor and electronicsIndustrial machinery and equipmentMedical devicesPrecision parts in high-temperature environmentsNote: The suitability of Duratron T5530 PAI for sliding parts should be carefully evaluated as the glass fibers may cause abrasion to the mating surface.

Duratron® U2100 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional rigidity, dimensional stability, and a low Coefficient of Linear Thermal Expansion. With 10% glass-reinforcement, Duratron® U2100 PEI is a versatile and durable material that is suitable for a wide range of applications.Features:10% glass-reinforced for great rigidity and dimensional stabilityLow Coefficient of Linear Thermal ExpansionExcellent strength-to-weight ratio and tensile strengthBenefits:Versatile and durable material that can withstand harsh conditionsIdeal for semiconductor and electronics applications where dimensional stability and low thermal expansion is importantSuitable for a wide range of applicationsApplications:Semiconductor and electronics applicationsApplications that require dimensional stability and low thermal expansionDuratron® U2100 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your semiconductor and electronics applications or need a material that can withstand high temperatures and harsh environments, Duratron® U2100 PEI is the ideal solution. Try it today and experience the difference for yourself!

Duratron® T4203 PAI is a polyamide-imide material that offers exceptional strength and durability in high-tech equipment and structural applications. With features such as high impact strength, high elongation, and dimensional stability, it is a reliable choice for precision parts and components that require high performance in extreme conditions.Features:High impact strengthHigh elongationDimensional stabilityHigh temperature resistanceExceptional machinabilityBenefits:Able to withstand extreme conditions and loadsIdeal for precision parts and components in high-tech equipmentSuitable for structural applications such as linkages and seal ringsExcellent choice for wear applications involving impact loading and abrasive wearApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearPrecision parts in high-tech equipment