Products

Semitron® ESd 520HR Polyamide-imide PAI electro static dissipative shapes are a unique and advanced solution for test equipment and device handling applications within the semiconductor and electronics industry. The product possesses the unique ability to resist dielectric breakdown at high voltages, and maintains its performance throughout the 100V to 1000V voltage range while offering the mechanical performance needed to excel in demanding applications.Features:Resists dielectric breakdown at high voltagesMaintains performance throughout the 100V to 1000V voltage rangeHigh strength and heat resistanceSurface resistivity of 10E10 to 10E12 ohms per squareBenefits:High mechanical strength results in longer useful life of the test heads and greater units (tested) per hour.Minimizes the risk of 'leakage' (cross-talk)Retains its surface resistivity at electrical forces greater than 100 volts.Applications:IC Device Testing Fixtures: A test fixture manufacturer recently began using Semitron ESd 520HR that combines electrostatic dissipation (ESD) and high mechanical strength, to make integrated circuit test heads.Test nests, sockets, and contactors for test equipment and other device handling components.Other applications where controlled bleed off of static charges is critical.

Duratron® T5530 PAI is a high-performance, glass-reinforced polyamide-imide material that offers exceptional rigidity, retention of stiffness, low thermal expansion, and outstanding load-carrying capabilities. This 30% glass-reinforced grade is ideal for structural applications in the semiconductor, electronics, and aerospace industries, where high strength, stiffness, and dimensional stability are required.Features:High rigidity and retention of stiffnessLow thermal expansionOutstanding load-carrying capabilities30% glass reinforced for added strength and stiffnessBenefits:Suitable for structural applications in harsh environmentsOffers exceptional dimensional stability up to 260°CIdeal for precision parts in the electronic and semiconductor industriesApplications:Aerospace and defenseSemiconductor and electronicsIndustrial machinery and equipmentMedical devicesPrecision parts in high-temperature environmentsNote: The suitability of Duratron T5530 PAI for sliding parts should be carefully evaluated as the glass fibers may cause abrasion to the mating surface.

Duratron® T4501 PAI Polyamide-imide is a high-performance plastic known for its exceptional compressive strength and excellent wear resistance. This grade is ideal for general purpose wear and friction applications, and is able to endure harsh thermal, chemical, and stress conditions.Features:High compressive strengthExcellent wear resistanceAble to endure harsh thermal, chemical, and stress conditionsSimilar in composition to Duratron® T4301 PAIAvailable in larger shapes or componentsBenefits:Can carry more loadReliable solution for general purpose wear and friction applicationsSuitable for a wide range of applications that require high strength and durabilityApplications:General purpose wear and friction partsLarge shapes and componentsApplications that require high strength and durability such as industrial machinery, automotive and aerospace.

Semitron® CMP XL20 Polyamideimide PAI shapes were specifically developed for CMP ring applications in the semiconductor and electronics industry, due to their excellent long wear life in CMP slurries. In addition to these characteristics, Semitron® CMP XL20 PAI components display high strength and stiffness, and outstanding wear resistance over a broad range of temperatures, making this grade the ideal solution for dynamic applications in process environments.Features:Specifically developed for CMP ring applications in the semiconductor and electronics industryExcellent long wear life in CMP slurriesHigh strength and stiffnessOutstanding wear resistance over a broad range of temperaturesBenefits:Ideal solution for dynamic applications in process environmentsSignificantly lower cost per waferOutperforms PPS up to 20x in most processesPromotes fewer edge defects and better uniformityApplications:CMP ring applications in the semiconductor and electronics industryCan be used in clamp rings, trench rings, screws, pins, and shower headsSuitable for use in centering pins, focus rings, insulators, vacuum pads, and wafer guides.

Semitron® MPR 1000 - an advanced engineering material that is specially developed for use in the semiconductor and electronics industry. This material boasts excellent heat resistance and low erosion rates in plasma chambers, making it a top choice for vacuum chamber applications such as etch, CVD, and ion implant.Features:Longevity: Increased life in plasma chambers (up to 25X over polyimide in ozone)Clean: Low ionic metal content and low out-gassingValue: Lower overall cost in use compared to traditional materials used in vacuum chamber applications such as quartz, ceramics, and engineering plasticsBenefits:Long-lasting performance in plasma-based vacuum chambersLow maintenance and cost-effective solutionClean and efficient, suitable for semiconductor and electronics industryApplications:Clamp ringsTrench ringsScrewsPinsShower headsCentering pinsFocus ringsInsulatorsVacuum padsWafer guidesSemitron® MPR 1000 is a versatile material that is ideal for use in vacuum chamber applications within the semiconductor and electronics industry. With its outstanding heat resistance and low erosion rates, this material is a cost-effective and efficient solution that ensures longevity and clean performance in plasma-based vacuum chambers.

Duratron® T4503 PAI Polyamide-imide is a compression molded material that offers exceptional electrical insulation properties and excellent dimensional stability. This grade is often selected for extreme applications where large geometries are required, such as dies or thermal insulators. It has a similar composition to Duratron® T4203 PAI and is known for its high compressive strength, elongation, and impact resistance.Features:Outstanding electrical insulation propertiesExcellent dimensional stabilityHigh compressive strength and elongationImpact resistanceBenefits:Suitable for extreme applications such as dies and thermal insulatorsCan be used for large geometriesCan be used for electrical connectors and insulatorsApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearHigh Temperature Electrical ConnectorsBearing CagesCan Mandrel

Duratron® T4203 PAI is a polyamide-imide material that offers exceptional strength and durability in high-tech equipment and structural applications. With features such as high impact strength, high elongation, and dimensional stability, it is a reliable choice for precision parts and components that require high performance in extreme conditions.Features:High impact strengthHigh elongationDimensional stabilityHigh temperature resistanceExceptional machinabilityBenefits:Able to withstand extreme conditions and loadsIdeal for precision parts and components in high-tech equipmentSuitable for structural applications such as linkages and seal ringsExcellent choice for wear applications involving impact loading and abrasive wearApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearPrecision parts in high-tech equipment

Duratron® T4301 PAI Polyamide-imide is a high-performance plastic that offers exceptional properties for severe service wear applications. The addition of PTFE and graphite provides this grade with improved wear resistance and dimensional stability, making it an ideal solution for non-lubricated bearings, seals, bearing cages, and reciprocating compressor parts.Features:Very low expansion rate and coefficient of frictionLittle to no slip-stick in useExcellent dimensional stability over a wide temperature rangeHigh flexural modulus of 1,000,000 psiHigher wear resistance compared to unfilled Duratron® T4203 PAI gradeBenefits:Allows for increased bearing speeds and extended part lifeCan be used in severe service wear applicationsIdeal for non-lubricated bearings, seals, bearing cages, and reciprocating compressor partsApplications:Bearings and bearing cagesSealsReciprocating compressor partsOther severe service wear applicationsCompression-molded Duratron T4501 PAI is similar in composition to Duratron T4301 PAI, and is selected when larger shapes are required. Prior materials for these applications include steel cages, hardened steel balls, and bronze bushings. Duratron T4301 PAI (colour: black) also offers excellent dimensional stability over a wide temperature range.