ALTECH® ECO

MOCOM Compounds Brand

Products:55

ALTECH® ECO ABS 2017/506

Polymer Name:Acrylonitrile Butadiene Styrene (ABS)
Fillers Included:Glass Fiber
Processing Methods:Injection Molding
Functions:Resin
Chemical Family:Acrylonitrile Butadiene Styrene (ABS), Styrenics
Labeling Claims:Recycled, Conflict minerals-free, PFOS-free, Azo Colorants-free, Persistent Organic Pollutants (POP)-free, Azo Dyes-free, PFOA-free
Certifications & Compliance:ISO 13485, ISO 9001, IATF 16949, REACH (Europe), Directive 2011/65/EC amended through EU/2015/863 (RoHS), ISO 50001, ISO 14001, RoHS Compliant, EC No.1907/2006, REACH (UK), SVHC Compliant, ISO 45001, ISO 17025

MOCOM Compounds ALTECH® ECO ABS 2017/506 is a pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer containing 17% glass fibers and recycled material. It is typically processed using injection molding, with a melt temperature of 220-260°C and a mold temperature of 50-80°C. It is used in the automotive, electrical and electronic industries, as well as for consumer electronics, interior and various other applications, such as housings and audio equipment.

ALTECH® ECO PA6 1000/586

Polymer Name:Polyamide 6 (PA 6)
Functions:Resin
Processing Methods:Injection Molding
Chemical Family:Polyamides
Labeling Claims:PFOS-free, Recycled, Persistent Organic Pollutants (POP)-free, Azo Dyes-free, Azo Colorants-free, PFOA-free, Conflict minerals-free
Additives Included:Impact Modifier
Flexural Modulus:1900.0 - 1900.0 MPa
Features:Fast Solidifying, Impact Modified, Excellent Toughness

MOCOM Compounds ALTECH® ECO PA6 1000/586 is a polyamide 6 base polymer with fast solidifying, high impact modified, and high toughness properties. It contains recycled material, and is suitable for applications in the automotive, building and construction, and various market segments. Typical applications include operating elements, housings, cable ties, and various transport systems and energy management components.

ALTECH® ECO PA6 1000/588

Polymer Name:Polyamide 6 (PA 6)
Functions:Resin
Processing Methods:Injection Molding
Chemical Family:Polyamides
Labeling Claims:PFOS-free, Recycled, Persistent Organic Pollutants (POP)-free, Azo Dyes-free, Azo Colorants-free, PFOA-free, Conflict minerals-free
Additives Included:Heat Stabilizer
Flexural Modulus:2800.0 - 2800.0 MPa
Features:Fast Solidifying, Heat Stabilized, Good Mold Release

MOCOM Compounds ALTECH® ECO PA6 1000/588 is a polyamide 6 base polymer that is fast solidifying, easy to release (demolding), heat stabilized, and contains recycled material. It is suitable for electrical and electronic, automotive, building and construction, and various other applications and is typically used for conduit, technical profiles, and various other applications. Pre-drying conditions should be 80°C in a dry air (desiccant) dryer for 2-12 hours, depending on moisture content. Processing injection molding should be done with a melt temperature of 250-270°C and a mold temperature of 40-80°C.

ALTECH® ECO PA6 2025/509 GF25

Polymer Name:Polyamide 6 (PA 6)
Functions:Resin
Processing Methods:Injection Molding
Fillers Included:Glass Fiber
Chemical Family:Polyamides
Labeling Claims:PFOS-free, Recycled, Persistent Organic Pollutants (POP)-free, Azo Dyes-free, Azo Colorants-free, PFOA-free, Conflict minerals-free
Additives Included:Heat Stabilizer
Flexural Modulus:7000.0 - 7000.0 MPa
Features:Good Flow, Heat Stabilized, Good Mold Release

MOCOM Compounds ALTECH® ECO PA6 2025/509 GF25 is a polyamide 6 base polymer with 25% glass fiber filler/additive system that is heat stabilized and provides easy release (demolding) and easy flow characteristics. For processing injection molding, the melt temperature should be between 270-290°C and the mold temperature should be between 80-100°C. Typical applications include housings and various other applications. The material should be stored in a dry, light-protected environment with a temperature not exceeding 30°C. No additional moisture should be added to the material; otherwise, it can cause damage to the material.

ALTECH® ECO PA6 2030/160

Polymer Name:Polyamide 6 (PA 6)
Additives Included:Heat Stabilizer
Functions:Resin
Fillers Included:Glass Fiber
Chemical Family:Polyamides
End Uses:Automotive Applications, Housings, Construction Applications, Appliances, Garden Equipment, Sporting Goods, Machine/Mechanical Parts
Labeling Claims:PFOS-free, PFOA-free, Conflict minerals-free, Recycled, Azo Dyes-free, Azo Colorants-free, Persistent Organic Pollutants (POP)-free, Contains PIR Resin
Processing Methods:Injection Molding
Density:1360.0 - 1360.0 kg/m³
Features:Good Mold Release, Heat Aging Resistant, Heat Stabilized

MOCOM Compounds ALTECH® ECO PA6 2030/160 is a polyamide 6-based polymer containing a 30% glass fiber filler/additive system that is heat-stabilized and easy to release (demold). It is designed for automotive, machinery, building and construction, and sport and leisure applications, and is suitable for injection molding with a melt temperature of 270-290°C and mold temperature of 80-100°C. This product contains recycled material.

ALTECH® ECO PA6 2030/219 GF30 IM

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Functions:Resin
Chemical Family:Polyamides
Fillers Included:Glass Fiber
Additives Included:Impact Modifier, Heat Stabilizer
End Uses:Housings
Features:Heat Stabilized, Impact Modified

MOCOM Compounds ALTECH® ECO PA6 2030/219 GF30 IM is a heat-stabilized, impact-modified, injection molding grade containing 30% glass fibers and recycled material. It should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content. During processing, the melt temperature should be set between 270-290°C and the mold temperature between 80-100°C. Typical applications include housings.

ALTECH® ECO PA6 3030/100 GB30

Polymer Name:Polyamide 6 (PA 6)
Functions:Resin
Processing Methods:Injection Molding
Fillers Included:Glass Bead
Chemical Family:Polyamides
Additives Included:Heat Stabilizer
Certifications & Compliance:Directive 2011/65/EC amended through EU/2015/863 (RoHS), ISO 45001, RoHS Compliant, ISO 13485, SVHC Compliant, ISO 17025, EC No.1907/2006, ISO 14001, ISO 9001, IATF 16949, REACH (UK), ISO 50001, REACH (Europe)
Flexural Modulus:3400.0 - 3400.0 MPa

MOCOM Compounds ALTECH® ECO PA6 3030/100 GB30 is an injection molding grade material with a base polymer of polyamide 6 and a filler/additive system of 30% glass beads. This material is heat stabilized, has an easy release property for demolding, and is suitable for various applications and market segments.

ALTECH® ECO PA6 3230/100 GB20 GF10

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Functions:Resin
Chemical Family:Polyamides
Fillers Included:Glass Fiber, Glass Bead
Additives Included:Heat Stabilizer
Features:Fast Solidifying, Low Warpage, Heat Stabilized
Flexural Modulus:5400.0 - 5400.0 MPa

MOCOM Compounds ALTECH® ECO PA6 3230/100 GB20 GF10 is a polyamide 6 base polymer with a filler/additive system consisting of 20% glass beads and 10% glass fibers, which provides low warpage, heat stabilization, and fast solidifying properties. It is recommended to pre-dry the material at 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of 0.15%. For processing injection molding, the melt temperature should be between 270-290°C and the mold temperature should be between 80-100°C. Typical applications for this material include various industrial components.

ALTECH® ECO PA6 4230/100 GF10 MR20

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Functions:Resin
Chemical Family:Polyamides
Fillers Included:Mineral, Glass Fiber
Additives Included:Heat Stabilizer
Features:Good Flow, Low Warpage, Heat Stabilized, Superior Surface Quality
Flexural Modulus:5900.0 - 5900.0 MPa

MOCOM Compounds ALTECH® ECO PA6 4230/100 GF10 MR20 is a heat-stabilized polyamide 6 blend with 10% glass fibers and 20% mineral. Pre-drying is recommended at 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of 0.15%. It is suitable for injection molding with a melt temperature of 270-290°C and a mold temperature of 80-100°C. It is typically used in the automotive market for engine covers and housings, and should be stored in a dry and light-protected environment not exceeding 30°C to ensure optimal properties.

ALTECH® ECO PA6 4230/100.02 GF10 MR20

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Functions:Resin
Chemical Family:Polyamides
Fillers Included:Mineral, Glass Fiber
Additives Included:Heat Stabilizer
Features:Good Flow, Low Warpage, Heat Stabilized, Superior Surface Quality
Flexural Modulus:6700.0 - 6700.0 MPa

MOCOM Compounds ALTECH® ECO PA6 4230/100.02 GF10 MR20 is a heat-stabilized polyamide 6 that contains 10% glass fibers and 20% mineral filler/additive system. It is recommended to pre-dry the material at 80°C in a dry air (dessiccant) dryer for 2-12 h, depending on its moisture content, with a maximum moisture content of <0.15%. For injection molding, the melt temperature should be between 270-290°C, and the mold temperature should be between 80-100°C. Typical applications include engine covers and housings, which offer good flow, low warpage, and high surface quality.

ALTECH® ECO PA66 1000/116

Polymer Name:Polyamide 66 (PA 66)
Processing Methods:Injection Molding
Functions:Resin
Chemical Family:Polyamides
Additives Included:Impact Modifier, Heat Stabilizer
End Uses:Automotive Applications, Housings, Automotive Exterior Trim, Fittings, Cable Ties, Automotive Interior Parts, Automotive Exterior Parts, Clips, Construction Applications, Fixtures, Automotive Interior Trim
Flexural Modulus:2400.0 - 2400.0 MPa
Features:Impact Modified, Heat Stabilized

MOCOM Compounds ALTECH® ECO PA66 1000/116 is a polyamide 66 base polymer that is impact modified, high heat stabilized, and contains recycled material. It is suitable for applications such as housing and automotive trim unpainted, cable ties, clips, and various fixtures/fittings in the automotive, building, and construction industries. Pre-drying should be done in a dry air (dessiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of 0.15%. Processing injection molding should be done at a melt temperature of 270-290°C and a mold temperature of 40-80°C.

ALTECH® ECO ABS 2017/500 GF17

Polymer Name:Acrylonitrile Butadiene Styrene (ABS)
Fillers Included:Glass Fiber
Functions:Resin
Chemical Family:Styrenics, Acrylonitrile Butadiene Styrene (ABS)
Processing Methods:Injection Molding

MOCOM Compounds ALTECH® ECO ABS 2017/500 GF17 is a pre-drying condition Acrylonitrile/Butadiene/Styrene/Copolymer copolymer with 17% glass fibers. It is processed through injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C. The maximum moisture content is 0.05%, so pre-drying should be done in either a dry air (dessiccant) dryer for 2-4 hours or an air circulating dryer for 3-8 hours depending on the moisture content. It is suitable for injection molded parts.

Knowde Brand Summary

Identification

Additives Included: Antioxidant,
Flame Retardant,
Heat Stabilizer,
Impact Modifier,
Processing Stabilizer,
Slip Agent,
UV Stabilizer
Chemical Family: Acrylonitrile Butadiene Styrene (ABS),
Polyamides,
Polycarbonate (PC),
Polyolefins,
Polypropylenes (PP),
Styrenics
Fillers Included: Glass Bead,
Glass Fiber,
Mineral,
Talc
Polymer Name: Acrylonitrile Butadiene Styrene (ABS),
PC/ABS Alloy,
PC/ASA Alloy,
Polyamide 6 (PA 6),
Polyamide 66 (PA 66),
Polycarbonate (PC),
Polypropylene Block Copolymer (PP Block Copolymer),
Polypropylene Copolymer,
Polypropylene Homopolymer (HPP)
Technologies: Plastics
Product Families: Basic Thermoplastics
Polyolefins,
Recycled Polymers,
Styrenics
Engineering & Specialty Polymers
Blends & Alloys,
Polyamides,
Polycarbonates
Plastics & Elastomers Functions: Resin

Features & Benefits

Labeling Claims: Azo Colorants-free,
Azo Dyes-free,
Conflict minerals-free,
Contains PIR Resin,
PFOA-free,
PFOS-free,
Persistent Organic Pollutants (POP)-free,
Recycled

Applications & Uses

Markets: Automotive & Transportation,
Building & Construction,
Consumer Goods,
Electrical & Electronics
Applications: Appliances & Electronics
Automotive
Automotive Lighting,
Chassis & Brake,
Cooling & Climate,
Exterior & Body,
Fuel Systems,
Interior,
Powertrain & UTH,
Tires
Building Materials
Pipes & Plumbing
Devices & Assemblies
Consumer Electronics,
Lighting
Furniture
Housewares
Lawn & Garden
Parts & Components
Batteries,
Connectors,
Housings & Enclosures,
Switches & Relays,
Terminal Blocks, Plugs & Sockets
Sports & Recreation
Plastics & Elastomers End Uses: Air Ducts,
Appliances,
Audio Equipment,
Automotive Applications,
Automotive Exterior Parts,
Automotive Exterior Trim,
Automotive Interior Parts,
Automotive Interior Trim,
Battery Parts,
Bearing Cages,
Busbar,
Cable Ties,
Charger Inlet,
Charging Plug,
Chassis,
Clips,
Conduit,
Connectors,
Construction Applications,
Cooling System,
Ducting Systems,
Electrical Components,
Electrical/Electronic Applications,
Energy Management,
Engine Covers,
Fans,
Filter Systems,
Fittings,
Fixtures,
Furniture,
Garden Equipment,
Household Goods,
Housings,
Lamp Covers,
Lamps,
Light Switches,
Machine/Mechanical Parts,
Oil Pan,
Oil Pump Parts,
Oil Sumps,
Piping,
Plugs,
Profiles,
Racks,
Radiator Systems,
Shelves,
Shock Absorbers,
Sockets,
Sporting Goods,
Stearing,
Structural Parts,
Wheel Trims
Plastics & Elastomers Processing Methods: Injection Molding

Knowde Brand Highlights

Altech® ECO Highlights and Advantages: Altech® ECO Near-To-Prime® recycled-based compounds combine the high quality of Altech® products with the sustainability of recycled resources. They contribute to improving the CO2 balance and to reducing the ecological footprint of the end products.

The Altech® ECO portfolio offers tailor-made products for versatile application areas on a high technical level. Our recycling compounds are based on carefully selected and pre-processed PA6, PA66, PP, PC and ABS recyclates. Various fillers, impact modification or heat aging resistance are only a few examples of the unlimited possibili- ties of what the Altech® ECO product range has to offer.

Recycled contents of up to 100 % adress the requirements of consumers with an ever growing consciousness for recycling and sustainability and thus expect new solutions regarding the choice of materials used.

Consistently high, Near-to-Prime® quality of the products is en- sured through conscientious raw material selection, strict quality control and tight production tolerances.

Altech® ECO compounds are in use at well-known manufacturers and OEMs in the automotive, E&E, consumer goods and building & construction industry. Engine beauty covers, cam covers, functional parts, fittings, electrical tool housings and UV-stabilized lamp housings are only a few application examples.

According to prior agreement, color matching is possible with selected materials out of the portfolio

Quality meets sustainability, because there is no Planet B.

Altech® ECO: the advantages at a glance

Low CO2 footprint due to use of recycled feedstock

Near-to-Prime® performance and quality

Broad product portfolio, tailor-made properties

Technical datasheets and specification available

Color matching partly possible

Cost efficiency

PA6, PA66, PC, PC+ABS, PP

High-quality recycled compounds

OEM-approved quality

Glass and mineral fillers

Impact modified

UV-stabilized

Sustainable