Browse Products by Market

Browse Products by Technology

Products

Brands

Formulations

Documents

Experts

MOCOM is a global compounder of thermoplastic polymers. The company with its headquarter in Hamburg, Germany, offers the plastics processing industry a comprehensive range of high-performance customized and standard compound solutions. The high performance and engineering compounds are complimented by the recyclate based compounds which deliver Near-To-Prime properties. MOCOM supplies a wide range of industries including Automotive, Electrical and Electronics, Home and Garden, Sports and Leisure, Transportation, and Healthcare. As part of the Otto Krahn Group, MOCOM currently employs around 800 people. It has production sites in Duncan, South Carolina (USA), three German locations (Hamburg, Erlenbach, Zülpich) as well as in Changshu (China). For more information visit <a href="https://www.mocom.eu/en" rel="noopener noreferrer" target="_blank">mocom.eu/en</a>&nbsp;

Sales

I support all stages of Business Development, from concept, to design, tooling, manufacturing, processing, and material selection.

Please reach out to me with any questions, I am happy to assist you in finding the right product or learning more about our storefront

As an expert in plastics with 10 years of experience and certified as a Master Molder, I can support you in all stages of Business Development.

Business Development Manager

With 22 Years of compounding experience I have the knowledge in resin selection and filler technology to be your material expert in any market segment

Business Development

ALCOM® MED PA66 1000 19046 has a minimum shelf life of 24 months and should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, 

ALCOM® MED PA66 1000 19046

Altech® ECO PA66 1000/561 is a polyamide 66 base polymer with impact modification and the inclusion of recycled material, making it suitable for applications in the automotive

ALTECH® ECO PA66 1000/561

Low CO2-footprint due to use of recycling feedstock
Near-To-Prime® performance and quality
Broad product portfolio, tailor-made properties
Technical datasheet and specificatio

ALTECH® ECO PC+ABS 1000/106

Altech® ECO PC+ABS 1000/500 is a polycarbonate + acrylonitrile butadiene styrene blend that contains recycled material.

ALTECH® ECO PC+ABS 1000/500

Altech® PP-H A 2040/556 GF40 CP is a polypropylene homopolymer injection molding grade with 40% glass fibers, heat-stabilized, processing-stabilized, low emission ...

ALTECH® PP-H A 2040/556 GF40 CP

Privacy

Terms & Conditions

Terms of Sale

Cookie Policy

ALTECH® ECO

ALTECH

ALCOLOR

ALFATER® XL

CELLIDOR

TEDUR

ALCOM

ALCOM® MED

WIPAFLEX

MOCOM Compounds Alcom® TCD PA66 5050 14016 is a thermal conductive and electrically insulating polyamide 66 material that is heat stabilized. It is used in a variety of market segments including automotive, machinery, electrical and electronic, and lighting. Typical applications include radiator systems, cooling systems, housings, functional components, plugs/connectors, and lamp sockets.

Alcom® TCD PA66 5050 14016

WIPELAST TV 30 BK UV is a black polypropylene-EPDM composite material with 30% talc filler and UV stabilizers, specifically designed for use in the automotive industry. Prior to processing, the material must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to achieve a maximum moisture content of 0.10%. During processing, the melt temperature should be maintained at 200-270°C, with a mold temperature of 20-60°C during injection molding.

WIPELAST TV 30 BK UV

MOCOM Compounds ALFATER® XL D40I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) suitable for food contact and compliant with EN 71-3. It has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance with an easy flow. It is suitable for usage in packaging, household goods, food processing industry, toys, and injection molded parts such as seals, sealing lips, handles, protection caps, caps/closures, containers, and kitchenware.

ALFATER® XL D40I 4FC0010

MOCOM Compounds ALTECH® ABS A 1000/180 is a base polymer composed of Acrylonitrile/Butadiene/Styrene/Copolymer with special features of injection molding grade and easy release (demolding). It has a maximum moisture content of &lt;0.20%. For processing injection molding, the melt temperature should be between 200-240°C and the mold temperature should be between 50-80°C. This product is suitable for automotive, medical/personal care, and various other market segments and is recommended for applications such as domestic appliances, household goods, interior decoration/finishing, dashboard/instrument panels, impact protection/shock absorbers, and various other typical applications.

ALTECH® ABS A 1000/180

MOCOM Compounds ALCOM® PC 740/1 PTFE20 is a polycarbonate base polymer with 20% PTFE filler/additive system, featuring improved sliding/wear properties. It is used in the automotive and machinery market segments, typically for injection molded functional components. The recommended pre-drying conditions are 120°C in a dry air (dessiccant) dryer for 2-3 hours depending on moisture content. The recommended processing injection molding parameters are melt temperature of 270-310°C and mold temperature of 80-110°C.

ALCOM® PC 740/1 PTFE20

MOCOM Compounds ALTECH® ECO PC 1000/100 is a heat-stabilized, easy-release injection molding grade of polycarbonate that can be used in a variety of market segments and applications. For pre-drying, it should be kept in a dry air (dessiccant) dryer at 120°C for 2-3 h, depending on moisture content, with a maximum moisture content of 0.02%. For injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used.

ALTECH® ECO PC 1000/100

MOCOM Compounds ALCOM® MED PS 1000 AS 14115 has a minimum shelf life of 24 months. It is based on a polystyrene impact polymer and contains an antistatic and permanent filler/additive system. It is designed for medical and personal care applications such as housings and is processed by injection molding with a melt temperature of 180-260°C and a mold temperature of 10-70°C. To ensure optimal performance, pre-drying conditions should be conducted in an air circulating dryer at 60-80°C for 2-3 h or in a dry air (dessiccant) dryer at 60-80°C for 2-3 h, depending on moisture content.

ALCOM® MED PS 1000 AS 14115

MOCOM Compounds ALTECH® ECO PA6 3230/100 GB20 GF10 is a polyamide 6 base polymer with a filler/additive system consisting of 20% glass beads and 10% glass fibers, which provides low warpage, heat stabilization, and fast solidifying properties. It is recommended to pre-dry the material at 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of 0.15%. For processing injection molding, the melt temperature should be between 270-290°C and the mold temperature should be between 80-100°C. Typical applications for this material include various industrial components.

ALTECH® ECO PA6 3230/100 GB20 GF10

WIC PP 15 N is a base polymer of Polypropylene reinforced with 15% carbon fiber in natural (carbon optic) color. It features heat aging stabilization, making it suitable for automotive, sport and other markets. The pre-drying conditions require it to be heated to 80°C in an air circulating dryer for 2-4h, dependent on the moisture content, with a maximum moisture content of 0.10%. The processing conditions require injection molding with a melt temperature between 210-260°C, and a mold temperature between 30-60°C. Under certain conditions, the increased thermal conductivity must also be taken into consideration for optimal performance.

WIC PP 15 N

MOCOM Compounds

MOCOM is a global compounder of thermoplastic polymers. The company with its headquarter in Hamburg, Germany, offers the plastics processing industry a comprehensive range of high-performance customiz

MOCOM - Thermoplastic Polymer - High Performance - ISO 17025

Website

LinkedIn

ALCOLOR® Function PC LS GY5030-19 Technical Data Sheet

ALCOLOR® Function PC LS GY5030-19 Technical Data Sheet - MOCOM Compounds - Knowde

Job Title

Shipping Terms

Name

and the data associated with it — permanently.

This is a Premium Feature

Changes to filters have not been applied.

Discard changes?

{userCompanyName} notice

In order to join {userCompanyName} on Knowde, you must use your business email address.

Business already on Knowde

{userCompanyName} requires all users on {companyName} to register with their business email address to ensure confidentiality and security.

{userCompanyName} requires registering your business email address

There's only a little ways to go.

Creating an account is free and the only way to directly download documents, order samples, request quotes and use direct messaging.

Quit Sign Up?

Tell us about {userCompanyName}

from concierge@knowde.com

Click the link in the email, or enter the 6-digit code

Verification email sent

Since you’re using a personal email address, we require proof to verify the information you have provided.

Please verify your account

Please go back and enter in an email address that is directly associated with a business.

Knowde is built for businesses

Also, using a personal email for creating your {companyName} account may require additional verification of your company details.

We recommend signing up with a work email address to get faster responses, especially when requesting samples, documents, and more.

Please enter your business email address below.  We’ll send you a confirmation code to quickly verify.

Enter your business email

{companyName} uses Knowde for account management so you can manage all of your sample requests, RFQs, orders and more in one place.

Knowde is for businesses, you may have a hard time receiving responses to your requests if you use a personal email address.

to {email}

We sent an email to {email}

Please click the link to reset your password

Check your email

Create a new password

Password expired

Sign in to {companyName}

Enter a new secure password

Change your password

Enter the email address associated with your account

Reset your password

Enter your password for

Use your Knowde password to sign in:

Please provide additional information to help us verify your company.

Terms and Conditions

Compare multiple products at once and find the best fit for your project needs.

Why is this important?

Enter your password

Unlock your account

Knowde is the world’s biggest marketplace to search for ingredients, polymers, and chemistry. You can:

Welcome to Knowde

View All Products

Cart

Please fix the following before proceeding to payment

An order receipt has been emailed to {email}

Order

This feature is currently unavailable at this screen size.

Payment

Shipping

Checkout

KEEP IN MIND

You will lose any existing chat history by starting a new chat.

Start a new chat?

Compare Products

This document is restricted content.

If you believe you should have permission to this document, please request access.

Restricted Access

It only takes 60 seconds to create an account.

Available {documentType} documents for this product ({counter})

Describe Documents You’d Like to Request

Invalid job title

That’s not the reaction we were expecting.

Page not found - Store for chemicals, polymers and ingredients

Internal Server Error - Store for chemicals, polymers and ingredients

Unexpected error occurred. Please contact us.

Client Side Exception - Store for chemicals, polymers and ingredients

Show products with

Filters

Featured Products

Flavor & Taste Explorer

Flavor Families

Enter your inquiry here, include as much detail as you’re able. *

To submit an inquiry to {companyName}, please fill out the form below and click Submit. They will get back to you as soon as they’re able.

Home Page

Request samples, documents, and quotes directly from suppliers

{companyName} experts - Knowde

Knowde is the first marketplace for chemicals, polymers and ingredients. Our leading-edge digital capabilities connect thousands of suppliers and customers every day.

Chemicals Marketplace - ingredients & raw materials - Knowde

Learn how to take full advantage of the free to use tools that you have unlocked.

Explore the capabilities of the platform and get immediate assistance for your needs with one of our experts.

Schedule a Demo

You’ll meet with Kiana from our Knowde Marketplace Team

Explore the capabilities of the platform and get immediate assistance for your needs.

Learn how you can make the most of the free tools now available to you.

Explore the capabilities of the platform with our dedicated team.

Weekly Webinar

See which others might better fit your needs.

This is just one of {allProducts} products on Knowde.

BROWSE BY

Knowde for Suppliers

Most popular categories

Gain instant access to our marketplace of over 250,000 chemicals, ingredients and polymers from 8,000 suppliers. Browse, search, and filter to quickly compare products, find information, request documents, order samples, and get quotes directly from suppliers.

Search and filter over 250,000 chemicals, ingredients and polymers, access documents and download starter formulations. Interact with over 8,000 suppliers whose representatives are ready to help. Sign up for a free Knowde Marketplace account today.

Create a free account to gain instant access to our marketplace of over 250,000 products and their documents.

Get new products to market faster with a free Knowde Marketplace account

The fastest way to find the right raw materials for your products

Want to explore more products?

Popular {companyName} Products

Start Order

Get a Quote

{price} each for {name}

1 of {brandProductsCount} products in this brand

This will be used for any follow-up questions so we can best meet your needs

Please fill out the form below to help {companyName} prepare your quote

Your request has been sent to {companyName}

This information will help us get you the right materials.

All Categories

{numberOfResults, plural, one {Brand} other {Brands}}

{numberOfResults, plural, one {Product} other {Products}}

Search Tips

{charactersCounter}/{limitCharacters} Characters

Visit

Your account has been verified. You now have access to the full power of {companyName}

The quantity your business will require annually, if the sample product suits your project's needs.

ALCOLOR® Function PC LS GY5030-19 Technical Data Sheet

Technical Data Sheet

Lonnie Tough Jr

Blaine Priebe

Salvador Ramiro Gonzalez Vaca

Jack Chiang

Mike Najjar