Browse Products by Market

Browse Products by Technology

MOCOM is a global compounder of thermoplastic polymers. The company with its headquarter in Hamburg, Germany, offers the plastics processing industry a comprehensive range of high-performance customized and standard compound solutions. The high performance and engineering compounds are complimented by the recyclate based compounds which deliver Near-To-Prime properties. MOCOM supplies a wide range of industries including Automotive, Electrical and Electronics, Home and Garden, Sports and Leisure, Transportation, and Healthcare. As part of the Otto Krahn Group, MOCOM currently employs around 800 people. It has production sites in Duncan, South Carolina (USA), three German locations (Hamburg, Erlenbach, Zülpich) as well as in Changshu (China). For more information visit <a href="https://www.mocom.eu/en" rel="noopener noreferrer" target="_blank">mocom.eu/en</a>&nbsp;

Sales

I support all stages of Business Development, from concept, to design, tooling, manufacturing, processing, and material selection.

Please reach out to me with any questions, I am happy to assist you in finding the right product or learning more about our storefront

As an expert in plastics with 10 years of experience and certified as a Master Molder, I can support you in all stages of Business Development.

Business Development Manager

With 22 Years of compounding experience I have the knowledge in resin selection and filler technology to be your material expert in any market segment

Business Development

ALCOM® MED PA66 1000 19046 has a minimum shelf life of 24 months and should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, 

ALCOM® MED PA66 1000 19046

Altech® ECO PA66 1000/561 is a polyamide 66 base polymer with impact modification and the inclusion of recycled material, making it suitable for applications in the automotive

ALTECH® ECO PA66 1000/561

Low CO2-footprint due to use of recycling feedstock
Near-To-Prime® performance and quality
Broad product portfolio, tailor-made properties
Technical datasheet and specificatio

ALTECH® ECO PC+ABS 1000/106

Altech® ECO PC+ABS 1000/500 is a polycarbonate + acrylonitrile butadiene styrene blend that contains recycled material.

ALTECH® ECO PC+ABS 1000/500

Altech® PP-H A 2040/556 GF40 CP is a polypropylene homopolymer injection molding grade with 40% glass fibers, heat-stabilized, processing-stabilized, low emission ...

ALTECH® PP-H A 2040/556 GF40 CP

Privacy

Terms & Conditions

Terms of Sale

Cookie Policy

ALTECH® ECO

ALTECH

ALCOLOR

ALFATER® XL

CELLIDOR

TEDUR

ALCOM

ALCOM® MED

WIPAFLEX

MOCOM Compounds ALTECH® PP-H A 2020/576 GF20 CP is a polypropylene homopolymer with 20% glass fibers, lubricant, chemically coupled, heat stabilized, and slip agent. For pre-drying conditions, a dry air (dessiccant) dryer should be used at 80-120°C for 2-3 hours, or an air circulating dryer should be used at 80-120°C for 2-4 hours. Processing injection molding requires a melt temperature of 200-250°C and a mold temperature of 20-70°C. This product is suitable for various injection molded parts in the electrical and electronic market segment. It should be protected from light, and stored at not above 30°C.

ALTECH® PP-H A 2020/576 GF20 CP

MOCOM Compounds ALTECH® PC A 1000/532 UV AS is a polycarbonate base polymer with antistatic and UV stabilized special features, used for injection molded parts in the electrical and electronic, building and construction, and sport and leisure market segments. Processing injection molding should be done at a melt temperature of 270-310°C and a mold temperature of 80-110°C. It should be stored dry and protected from light, not above 30°C.

ALTECH® PC A 1000/532 UV AS

MOCOM Compounds ALTECH® ECO PA6 2025/509 GF25 is a polyamide 6 base polymer with 25% glass fiber filler/additive system that is heat stabilized and provides easy release (demolding) and easy flow characteristics. For processing injection molding, the melt temperature should be between 270-290°C and the mold temperature should be between 80-100°C. Typical applications include housings and various other applications. The material should be stored in a dry, light-protected environment with a temperature not exceeding 30°C. No additional moisture should be added to the material; otherwise, it can cause damage to the material.

ALTECH® ECO PA6 2025/509 GF25

MOCOM Compounds ALCOM® LB PBT FC 2015 17076 GY1069-17 is a gray, opaque, food contact polybutylene terephthalate (Base Polymer) with 15% glass fibers, special filler (Filler/Additive System) designed specifically for light blocking components (Application Area) in the electrical and electronic market segment. It is typically processed through injection molding with a melt temperature of 250-270°C and a mold temperature of 80-120°C. Pre-drying Conditions should be done in a dry air (dessiccant) dryer at 100-120°C for 2-4 hours, or in an air circulating dryer at 100-120°C for 4-8 hours, with a maximum moisture content of &lt;0.02%.

ALCOM® LB PBT FC 2015 17076 GY1069-17

MOCOM Compounds ALFATER® XL A40I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) suitable for injection molding. It has a melt temperature of 190-220°C and a mold temperature of 10-60°C with injection speed in the middle to high range, back pressure (hydraulic) greater than 3 bar and a holding pressure of 50-70% of injection pressure. It has a natural color with bright inherent color and is low emission, with good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is used in the automotive, building and construction, electrical and electronic, sport and leisure, and furniture markets, and can be used for injection molded parts such as seals, sealing lips, handles, racking/shelving, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, and two-component components.

ALFATER® XL A40I 4GP0000

MOCOM Compounds ALCOM® ABS 530/50 HM is a white, pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer with a hygienic filler/additive system and antibacterial properties according to ISO 22196. It has a melt temperature range of 220-260°C and a mold temperature range of 50-80°C. This product is suitable for injection molded parts such as sanitary articles, hygiene products, domestic appliances, functional components, handles, and fittings, and is used for applications in the packaging, personal care, household goods, furniture, building and construction, and sport and leisure markets. For optimal results, it should be stored in a dry, light-tightly sealed environment.

ALCOM® ABS 530/50 HM

MOCOM Compounds ALCOM® PBT 700/1.1 CF20 PTFE15 is a polybutylene terephthalate base polymer with 20% carbon fibers and 15% PTFE, designed for use in machinery applications and injection molded parts. It is electrically conductive, has reduced surface resistivity and improved sliding/wear, and is heat stabilized. The pre-drying conditions are in a dry air (dessiccant) dryer 100-120°C for 2-4 hours, or in an air circulating dryer 100-120°C for 4-8 hours depending on moisture content. The processing injection molding melt temperature is 250-270°C and the mold temperature is 80-120°C. The product should be handled with care to avoid any damage.

ALCOM® PBT 700/1.1 CF20 PTFE15

MOCOM Compounds ALCOM® PA66 910/1 NU SV1057-03MCF is a Polyamide 66 base polymer with a metallic effect and low tendency to flow lines, fast solidifying, and easy release (demolding). It is used in the automotive, electrical and electronic, and building and construction markets for injection molded parts and housings. The pre-drying conditions for this material are 80°C in a dry air (dessiccant) dryer for 2-12 h depending on moisture content. The processing injection molding parameters are melt temperature 270-290°C and mold temperature 40-80°C.

ALCOM® PA66 910/1 NU SV1057-03MCF

MOCOM Compounds ALTECH® PP-H A 2030/758 GF30 CP is a polypropylene homopolymer containing 30% glass fibers and chemically coupled, high heat stabilized, high stiffness, high toughness and laser transparent special features. It is suitable for a variety of applications, such as housings. For optimal performance, store it in a dry, light-protected environment.

ALTECH® PP-H A 2030/758 GF30 CP

MOCOM Compounds

MOCOM is a global compounder of thermoplastic polymers. The company with its headquarter in Hamburg, Germany, offers the plastics processing industry a comprehensive range of high-performance customiz

MOCOM - Thermoplastic Polymer - High Performance - ISO 17025

Website

LinkedIn

ALCOM® PBT 700/1 GF20 PTFE15 (CN) Technical Data Sheet

ALCOM® PBT 700/1 GF20 PTFE15 (CN) Technical Data Sheet - MOCOM Compounds - Knowde

Job Title

Shipping Terms

Name

and the data associated with it — permanently.

This is a Premium Feature

Changes to filters have not been applied.

Discard changes?

{userCompanyName} notice

In order to join {userCompanyName} on Knowde, you must use your business email address.

Business already on Knowde

{userCompanyName} requires all users on {companyName} to register with their business email address to ensure confidentiality and security.

{userCompanyName} requires registering your business email address

There's only a little ways to go.

Creating an account is free and the only way to directly download documents, order samples, request quotes and use direct messaging.

Quit Sign Up?

Tell us about {userCompanyName}

from concierge@knowde.com

Click the link in the email, or enter the 6-digit code

Verification email sent

Since you’re using a personal email address, we require proof to verify the information you have provided.

Please verify your account

Please go back and enter in an email address that is directly associated with a business.

Knowde is built for businesses

Also, using a personal email for creating your {companyName} account may require additional verification of your company details.

We recommend signing up with a work email address to get faster responses, especially when requesting samples, documents, and more.

Please enter your business email address below.  We’ll send you a confirmation code to quickly verify.

Enter your business email

{companyName} uses Knowde for account management so you can manage all of your sample requests, RFQs, orders and more in one place.

Knowde is for businesses, you may have a hard time receiving responses to your requests if you use a personal email address.

to {email}

We sent an email to {email}

Please click the link to reset your password

Check your email

Create a new password

Password expired

Sign in to {companyName}

Enter a new secure password

Change your password

Enter the email address associated with your account

Reset your password

If the email address you've entered is registered to a knowde account, you should receive instructions to reset your password soon. Remember to check your spam or junk folder as well.

Enter your password for

Use your Knowde password to sign in:

Please provide additional information to help us verify your company.

Terms and Conditions

Compare multiple products at once and find the best fit for your project needs.

Why is this important?

Enter your password

Unlock your account

Knowde is the world’s biggest marketplace to search for ingredients, polymers, and chemistry. You can:

Welcome to Knowde

View All Products

Cart

Please fix the following before proceeding to payment

An order receipt has been emailed to {email}

Order

This feature is currently unavailable at this screen size.

Payment

Shipping

Checkout

KEEP IN MIND

You will lose any existing chat history by starting a new chat.

Start a new chat?

Compare Products

{price} each for {name}

This document is restricted content.

If you believe you should have permission to this document, please request access.

Restricted Access

It only takes 60 seconds to create an account.

Available {documentType} documents for this product ({counter})

Describe Documents You’d Like to Request

Invalid job title

That’s not the reaction we were expecting.

Page not found - Store for chemicals, polymers and ingredients

Internal Server Error - Store for chemicals, polymers and ingredients

Unexpected error occurred. Please contact us.

Client Side Exception - Store for chemicals, polymers and ingredients

Show products with

Filters

Featured Products

Flavor & Taste Explorer

Flavor Families

Enter your inquiry here, include as much detail as you’re able. *

To submit an inquiry to {companyName}, please fill out the form below and click Submit. They will get back to you as soon as they’re able.

Home Page

Request samples, documents, and quotes directly from suppliers

{companyName} experts - Knowde

Knowde is the first marketplace for chemicals, polymers and ingredients. Our leading-edge digital capabilities connect thousands of suppliers and customers every day.

Chemicals Marketplace - ingredients & raw materials - Knowde

Learn how to take full advantage of the free to use tools that you have unlocked.

Explore the capabilities of the platform and get immediate assistance for your needs with one of our experts.

Schedule a Demo

You’ll meet with Kiana from our Knowde Marketplace Team

Explore the capabilities of the platform and get immediate assistance for your needs.

Learn how you can make the most of the free tools now available to you.

Explore the capabilities of the platform with our dedicated team.

Weekly Webinar

See which others might better fit your needs.

This is just one of {allProducts} products on Knowde.

BROWSE THE MARKETPLACE BY

Knowde for Suppliers

Most popular categories

Gain instant access to our marketplace of over 250,000 chemicals, ingredients and polymers from 8,000 suppliers. Browse, search, and filter to quickly compare products, find information, request documents, order samples, and get quotes directly from suppliers.

Search and filter over 250,000 chemicals, ingredients and polymers, access documents and download starter formulations. Interact with over 8,000 suppliers whose representatives are ready to help. Sign up for a free Knowde Marketplace account today.

Create a free account to gain instant access to our marketplace of over 250,000 products and their documents.

Get new products to market faster with a free Knowde Marketplace account

The fastest way to find the right raw materials for your products

Want to explore more products?

Popular {companyName} Products

Start Order

Get a Quote

1 of {brandProductsCount} products in this brand

This will be used for any follow-up questions so we can best meet your needs

Please fill out the form below to help {companyName} prepare your quote

This supplier is not accepting quote requests at this time.

Your request has been sent to {companyName}

This information will help us get you the right materials.

All Categories

{numberOfResults, plural, one {Brand} other {Brands}}

{numberOfResults, plural, one {Product} other {Products}}

Search Tips

{charactersCounter}/{limitCharacters} Characters

Visit

Your account has been verified. You now have access to the full power of {companyName}

The quantity your business will require annually, if the sample product suits your project's needs.

ALCOM® PBT 700/1 GF20 PTFE15 (CN) Technical Data Sheet

Technical Data Sheet

Lonnie Tough Jr

Blaine Priebe

Salvador Ramiro Gonzalez Vaca

Jack Chiang

Mike Najjar