Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 6600.0 | MPa | ISO 178 |
| Flexural Strength | 170.0 | MPa | ISO 178 |
| Tensile Modulus | 7200.0 | MPa | ISO 527 |
| Tensile Strength at Break | 110.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 3.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 50.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 7.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 1540.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 210.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 215.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point) | 225.0 | °C | ISO 11357 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 250 - 270 | °C | — |
| Mould Temperature | 80 - 120 | °C | — |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 18.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 250.0 | °C | — |
| MVR Load | 2.16 | kg | — |
| Shrinkage (Lengthwise, 24h) | 0.2 - 0.4 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.7 - 1.1 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 100-120 °C for 2-4 h
- In an air circulatIng dryer 100-120 °C for 4-8 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.