Products

MOCOM Compounds ALTECH® ABS A 1000/670 is a Acrylonitrile/Butadiene/Styrene/Copolymer with good flow and processing stability. It is suitable for processing in injection molding with melt temperatures of 200-240°C and mold temperature of 50-80°C, and is suitable for applications in Medical/Personal Care, Packaging, Interior Decoration/Finishing, Hygiene products, and various injection molded parts. Pre-drying Conditions are 80°C in an air circulating dryer for 3-6 h, 80°C in a dry air (dessiccant) dryer for 2-4 h depending on moisture content with a maximum moisture content of <0.20%. To ensure the best results, it should be stored in a dry and light-protected environment at a temperature not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H FC 2020/100.01 is a polypropylene homopolymer reinforced with 20% glass fibers. It is suitable for injection molding at a melt temperature of 200-250°C and a mold temperature of 20-70°C, with features such as easy release (demolding), processing stability, and heat stability. This product is suitable for building and construction, packaging, food contact, household goods, thin walled parts, and kitchenware applications.

MOCOM Compounds ALFATER® XL A90I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) suitable for processing injection molding. It has special features such as food contact compliance with EN 71-3, good colorability, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in a variety of market segments such as packaging, household goods, food processing industry, toys, and is suitable for injection molded parts such as seals, sealing lips, handles, soft touch elements, protection caps, caps/closures, containers, kitchen ware and 2K components with a maximum service temperature range ranging from -40-125°C.

MOCOM Compounds ALCOM® MED PA66 1000 19046 has a minimum shelf life of 24 months and should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of less than 0.12%. The recommended processing injection molding melt temperatures are between 270-290°C and mold temperatures between 40-80°C. The base polymer is Polyamide 66, and it features easy release (demolding) and heat stabilization. It is suitable for the packaging, Medical / Personal Care market segments and can be used for injection molded parts of various shapes and sizes.

MOCOM Compounds ALPERFORM® PE SL FC 0205-14 EA is a base polymer consisting of polyethylene low density with a filler/additive system of 2% lubricant. It has a minimum shelf life of 6 months and is dosage dependent on application and operational area, with 5% extrusion and 5% injection molding. It has special features including a slip agent, migration towards surface, food contact, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, and dust-free. It is suitable for use in polyethylene low density, polyethylene linear low density, polyethylene high density, ethylene acrylic acid copolymer, polypropylene, and polypropylene copolymer.

MOCOM Compounds ALCOM® HM PP 1000 18038 is a pre-drying condition polypropylene copolymer with a hygienic material filler/additive system and a silver, metallic color similar to RAL 9022 and RAL 9023. It has antibacterial properties according to ISO 22196, and is used in packaging, personal care, household goods, furniture, building, and construction applications such as sanitary articles, hygiene products, kitchen ware, functional components, housings, handles, containers, and caps/closures. Processing injection molding requires a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-H FC 4940/500 TV 40 is a polypropylene homopolymer pre-dried with a desiccant dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours. It is suitable for applications in the packaging, building and construction markets, as well as food contact and toys, with typical applications including functional components and housings. To ensure optimal performance, it should be stored in a dry, light-protected environment at a temperature not exceeding 30°C.

MOCOM Compounds ALCOM® HM PP 3030 14029 is a polypropylene with 30% glass beads, hygienic material and gray color, featuring antibacterial properties according to ISO 22196. It is used in the packaging, personal care, household goods, furniture, building and construction markets. Typical applications include sanitary articles, hygiene products, domestic appliances, kitchen ware, functional components, housings, handles, fittings, containers, and caps/closures. Injection molding requires a melt temperature of 200-270°C and a mold temperature of 20-90°C, with a maximum moisture content of <0.10%.

MOCOM Compounds ALTECH® PP-H FC 2030/100 GF30 is a Polypropylene Homopolymer with a 30% glass fibers filler/additive system that provides high stiffness and is both processing and heat stabilized. It has a melt temperature of 200-250°C and a mold temperature of 20-70°C. This material is used in market segments such as packaging, personal care, machinery, electrical and electronic products, and is suitable for injection molded parts, electrical components, domestic appliances, and food contact items. Typical applications include kitchenware, functional components, and housings.

MOCOM Compounds ALCOM® HM PC+ABS 1000 AG 16152 is a hygienic material with antibacterial properties according to ISO 22196 in its natural color. It is designed for packaging, personal care, household goods, furniture, building and construction, and sport and leisure applications. It is suitable for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners, handles, profiles, etc.

MOCOM Compounds ALTECH® PS FC 1000/507 is a white polystyrene impact copolymer used for various packaging applications, suitable for food contact. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 60-75°C for 2-3 hours, or an air circulating dryer at 60-75°C for 2-3 hours. Processing should be done through injection molding, with a melt temperature of 180-260°C and a mold temperature of 10-70°C.

MOCOM Compounds ALFATER® XL A70I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) with natural and bright inherent colors. It has excellent features for food contact, compliant with EN 71-3, good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It has an easy flow and is ideal for use in the packaging, household goods, food processing industry, toys, and injection molded parts such as seals, sealing lips, handles, soft touch elements, protection caps, caps/closures, containers, kitchenware, and 2K components.

MOCOM Compounds ALTECH® PA6+ABS A 1000/720 UV is a polyamide + acrylonitrile butadiene styrene blend that is processing and UV stabilized. It is commonly used for injection molded parts such as housings in domestic appliances, cosmetics, and jewelry. Pre-drying conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 h, depending on moisture content. Processing injection molding requires a melt temperature of 250-280°C and a mold temperature of 40-90°C. This product should be protected from light to maintain its quality and should be stored in a cool, dark place.

MOCOM Compounds ALCOM® ABS 530/50 HM is a white, pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer with a hygienic filler/additive system and antibacterial properties according to ISO 22196. It has a melt temperature range of 220-260°C and a mold temperature range of 50-80°C. This product is suitable for injection molded parts such as sanitary articles, hygiene products, domestic appliances, functional components, handles, and fittings, and is used for applications in the packaging, personal care, household goods, furniture, building and construction, and sport and leisure markets. For optimal results, it should be stored in a dry, light-tightly sealed environment.

MOCOM Compounds ALTECH® ABS A 1000/160 is a Acrylonitrile/Butadiene/Styrene/Copolymer with good flow and processing stability, making it suitable for a variety of applications such as Medical/Personal Care, Packaging, Interior Decoration/Finishing, Hygiene Products, and Injection molded Parts. The recommended pre-drying conditions are 80°C in an air circulating dryer for 3-6 hours and 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content with a maximum moisture content of <0.20%. The processing injection molding conditions are melt temperature 200-240°C and mold temperature 50-80°C.

MOCOM Compounds ALCOM® HM PP 1000 AG 17005 is a pre-dried polypropylene copolymer containing a hygienic filler/additive system. The material is white, similar to RAL 9003, and has antibacterial properties according to ISO 22196. It is suitable for use in packaging, personal care, household goods, furniture, building, and construction applications. Injection molding of the material should be done with a melt temperature of 200-270°C and a mold temperature of 20-70°C. The material should be stored and handled in a tightly sealed environment.

MOCOM Compounds Alcom® DET PA66 FC 8010 17047 BL2296-09 is a detectable polyamide 66 base polymer with a 10% metal filler/additive system, specially designed for injection-molded parts in food contact packaging applications. It is suitable for the production of fittings, cable ties, caps/closures, and other injection-molded components.

MOCOM Compounds ALTECH® PP-H FC 1000/100 DS is a polypropylene homopolymer that has special features such as detergent solution stabilization, good hydrolysis resistance, easy release (demolding) and a slip agent, as well as being heat stabilized. It is suitable for use in the electrical and electronic, packaging, and building and construction markets for applications such as food contact, injection molded parts and exterior parts. Typical applications include functional components and housings. For injection molding, processing should be done with a melt temperature of 200-240°C and a mold temperature of 20-70°C.

MOCOM Compounds Alcom® DET PP FC 8010 14084 is a detectable polypropylene base polymer with a 10% metal filler/additive system, designed for injection-molded parts in food contact packaging applications. It is suitable for the production of fixtures/fittings, cable ties, caps/closures, and other injection-molded components.

MOCOM Compounds ALFATER® XL A60I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) of natural color, bright inherent color, and blue. Its pre-drying conditions include a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of less than 0.10%. Special features of the polymer include being food contact compliant with EN 71-3, good colorability, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the packaging, household goods, food processing industry, toys, and other areas for injection molded parts, such as seals, sealing lips, handles, soft touch elements, protection caps, caps/closures, containers, and kitchenware. It adheres to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 16077 is a hygienic material with antibacterial features according to ISO 22196. It is white in color, similar to RAL 9003, and is mainly used for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners. It is also suitable for applications such as packaging, personal care, furniture, building and construction, and sport and leisure.

MOCOM Compounds ALCOM® ABS 530/29 HM-AG is a Pre-Drying Conditions Acrylonitrile/Butadiene/Styrene/Copolymer with a filler/additive system of hygienic material and light stabilizer, in white, similar to RAL 9003, gray, similar to RAL 7004, similar to RAL 7015, and similar to RAL 7043, with special features of antibacterial acc. to ISO 22196. It is marketed in segments such as packaging, personal care, household goods, furniture, building and construction, and sport and leisure, with application areas such as injection molded parts, and typical applications including sanitary articles, hygiene products, domestic appliances, functional components, handles, and fittings.

MOCOM Compounds ALCOM® HM PP 3030 19024 is a white polypropylene homopolymer with a 30% glass bead filler/additive system that has antibacterial properties according to ISO 22196. It is widely used in markets such as packaging, personal care, household goods, building and construction, and sport and leisure. Typical applications include sanitary articles, hygiene products, domestic appliances, kitchen ware, functional components, housings, handles, fittings, containers, and caps/closures.

MOCOM Compounds ALTECH® PP-H FC 1000/578 is a Polypropylene Homopolymer with a hygienic material filler/additive system designed for Medical/Personal Care, packaging, and medical device applications. For injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. Typical applications include functional components. To ensure optimal performance, it is recommended to protect from light and store at temperatures not exceeding 30°C.

MOCOM Compounds Alcom® DET PA66 FC 8010 15041 is a detectable injection-molding grade polyamide 66 base polymer with a metal filler/additive system. Specially designed for food contact packaging, it is suitable for the production of fixtures/fittings, cable ties, caps/closures, and other injection-molded components.

MOCOM Compounds ALPERFORM® PE SL FC 0207-14 OA is a base polymer of polyethylene low density with a filler/additive system of 2% lubricant. It has special features of slip agent, migration towards the surface, food contact, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, and dust-free. It is suitable for injection molding with a melt temperature of 180-240°C and a mold temperature of 20-40°C, as well as extrusion dependent on the application and operational area. It is recommended for use in the food processing industry, household goods, packaging, and other injection molded, extruded, and blow molded parts.

MOCOM Compounds ALFATER® XL D40I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) suitable for food contact and compliant with EN 71-3. It has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance with an easy flow. It is suitable for usage in packaging, household goods, food processing industry, toys, and injection molded parts such as seals, sealing lips, handles, protection caps, caps/closures, containers, and kitchenware.

MOCOM Compounds ALCOM® PP 620/3 BS73 is a polypropylene random copolymer with special features of high density, high acoustic damping, and increased X-Ray contrast. It is used in the furniture, packaging, and personal care market segments, and typical applications include fixing elements and housings. Processing is done via injection molding with a melt temperature of 200-270°C and mold temperature of 20-90°C. For optimal performance, it should be stored in a dry place, protected from light.

MOCOM Compounds ALCOM® HM PP 1000 AG 14079 is a polypropylene homopolymer with a hygienic material filler/additive system and natural color. It has antibacterial features according to ISO 22196 and is suitable for applications in packaging, personal care, household goods, furniture, building and construction. Typical applications include sanitary articles, hygiene products, kitchenware, functional components, housings, handles, containers, and caps/closures.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 14069 is a hygienic material composed of a Polyamide + Acrylonitrile Butadiene Styrene Blend, available in gray, similar to RAL 7015 and RAL 7042. It has antibacterial properties according to ISO 22196 and can be used for packaging, personal care, furniture, building and construction, and sport and leisure applications.

MOCOM Compounds ALFATER® XL A50I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) polymer with a natural color and bright inherent color. It is suitable for injection molding with a melt temperature of 190-220°C, mold temperature of 10-60°C, and injection speed of middle to high. It has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is compliant with EN 71-3 and is suitable for food contact. This polymer is suitable for packaging, household goods, food processing industry, toys, and injection molded parts and has a service temperature range of -40-125°C.

MOCOM Compounds ALCOM® HM ABS 1000 AG 17161 is a pre-drying condition acrylonitrile/butadiene/styrene/copolymer with a hygienic material filler/additive system. It is white in color, similar to RAL 9003, and has antibacterial properties according to ISO 22196. This material is suitable for packaging, personal care, household goods, and building and construction applications, and is suitable for injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C. To ensure optimal performance, it should be stored in a dry, light-protected area with a tightly sealed container.

MOCOM Compounds ALFATER® XL A40I 4FC0010 is a thermoplastic vulcanizate (PP+EPDM) that is designed for injection molding applications. This material has a natural color with a bright inherent color and is compliant with EN 71-3 regulations for food contact. It is suitable for use in the packaging, household goods, food processing industry, toy markets, and other applications. The material has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is easy to flow and can be used for injection molded parts such as seals, sealing lips, handles, soft-touch elements, protection caps, caps/closures, containers, kitchenware, and 2K components, making it a reliable choice for many applications.

MOCOM Compounds ALCOM® HM ABS 1000 AG 14077 is a pre-drying Acrylonitrile/Butadiene/Styrene/Copolymer with hygienic material, light stabilizer, and natural color. It has antibacterial properties according to ISO 22196 and is used in the market segments of packaging, personal care, household goods, furniture, building and construction, and sport and leisure. It is mainly used in sanitary articles, hygiene products, domestic appliances, functional components, clothing/fasteners, housings, handles, and fittings.

MOCOM Compounds ALFATER® XL A80I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) suitable for pre-drying conditions in a dry air (dessiccant) dryer at a temperature of 70-80°C for 2-4 hours. It has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, as well as easy flow. It is compliant with EN 71-3, making it suitable for food contact, and is suitable for the packaging, household goods, food processing industry, toys, and injection molded parts, such as seals, sealing lip, handles, soft touch elements, protection caps, caps / closures, containers, kitchen ware, and 2K components.

MOCOM Compounds ALCOLOR® PMMA A WT949-1842 is a Polymethylmethacrylate-based colorant with a color of white, free from cadmium, lead, and diarylide pigments, dust-free, high dispersibility, high additive content, and is suitable for use in lighting, furniture, building and construction, cosmetics, jewelry, and injection-molded parts.