Products

MOCOM Compounds ALCOM® CFX ASA 1000 UV 15116 SV1163-15MC is a pre-drying conditions acrylonitrile/styrene/acrylate/copolymer with UV stabilized metallic effect, which has low tendency to flow lines and is easy to flow. It is used in electrical and electronic, building and construction, and sport and leisure applications and is an injection molding grade. The melt temperature for processing injection molding is 240-280°C and the mold temperature is 40-80°C.

MOCOM Compounds ALCOM® ASA 540/7 UV SV1281-08MCF is a UV-stabilized Acrylonitile/Styrene/Acrylate/Copolymer with a low tendency to form flow lines and a metallic effect, similar to that of RAL 9006. It is suitable for injection molding with a melt temperature range of 240-280°C, and a mold temperature range of 40-80°C. It is suitable for use in electrical and electronic, building and construction, and sport and leisure applications, such as for housings. For optimal performance, it should be stored in a dry and light-protected environment.

MOCOM Compounds ALCOM® ASA 540/7 UV SV1156-12MCF is a base polymer of Acrylonitile/Styrene/Acrylate/Copolymer with a metallic effect similar to RAL 9006, featuring low tendency to flow lines and UV stabilization. It is used for electrical and electronic, building and construction, and sport and leisure applications such as housings.

MOCOM Compounds ALTECH® ASA A 1000/729 UV is a UV-stabilized, injection-molding grade Acrylonitrile/Styrene/Acrylate/Copolymer filled with a light stabilizer, suitable for various applications. Pre-drying conditions include 80°C in a dry air (dessiccant) dryer for 2-4 hours, or 80°C in an air circulating dryer for 3-6 hours depending on moisture content. For processing injection molding, a melt temperature of 240-280°C and a mold temperature of 40-80°C is required.

MOCOM Compounds ALCOM® CFX ASA 5010 WP 16014 SV1019-16MC is a pre-dried Acrylonitile/Styrene/Acrylate/Copolymer containing 10% PTFE with a metallic effect, improved sliding/wear and low tendency to flow lines. It is used in the machinery market segment for injection molded parts such as bearings and sliding elements. Pre-drying conditions include 80°C in a dry air (dessiccant) dryer for 2-4 hours, and 80°C in an air circulating dryer for 3-6 hours depending on the moisture content. The melt temperature for injection molding is 240-280°C and the mold temperature is 40-80°C. For optimal performance, it should be stored in a cool, dry, and dark place.

MOCOM Compounds ALCOM® ASA 540/7 UV SV1490-05MCF is a UV-stabilized acrylonitrile/styrene/acrylate/copolymer with a metallic effect. It has a low tendency to cause flow lines and is used in electrical and electronic, building and construction applications, such as housings. For injection molding, melt temperature should be between 220-260°C and mold temperature should be between 50-80°C. It is designed to retain its integrity in outdoor applications.