Products

Bermocoll Prime 1000 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints. Bermocoll EBM 10 000 is a low viscosity grade of methyl ethylhydroxyethyl cellulose.

Alcosperse 492 is a polyacrylate ammonia salt dispersing agent often used in clay dispersant applications.

Wetfix N422 is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cutbacks. Adhesion promoter for surface dressing (chipseal).

Redicote EM22 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal, open graded cold mix and tack coat.

Berol 08 Powder is a fatty alcohol ethoxylate. It has a very strong hydrophilic (water soluble) character.

Bermocoll EM 7000 FQ is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water-based products.

Bermocoll EBS 351 FQ is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products.

Bermocoll M 10 is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll M 10 contains methyl, ethyl and hydroxyethyl substitution giving a unique Balance between workability and strength.

Berol 05 P is a fatty alcohol ethoxylate. It has a very strong hydrophilic (water soluble) character.

Bermocoll E 230 FQ is non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water based products. Bermocoll E 230 FQ is a low viscosity grade of ethyl hydroxyethyl cellulose.

Wetfix BE is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cut-backs. It is an adhesion promoter and coating aid for foamed asphalt cold mix.

Redicote C-150AP is an Adhesion Promoter for chip seal (hot applied), patch mixes and emulsions. Rapid and medium-setting Cationic Emulsions most often have good adhesion to siliceous aggregates, but anionic emulsions may require the addition of adhesion promoters. Redicote C-150AP have been specially formulated for use in anionic emulsions. Redicote C-150AP is a water-soluble adhesion promoter for anionic emulsions to improve coating and adhesion to aggregate. Additive for asphalt sealers (sealcoat) to improve resistance to moisture. Redicote C-150AP is an Easy to Use: Water-soluble product can be blended into finished emulsion or sealcoat Use 0.1-0.5% basis emulsion or finished sealcoat. Product contains water and should not be added to hot asphalt.

Redicote E-16 is a liquid emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal, tack coat and open graded cold mix. Active adhesion promoter for pre-coated chips, cutback or soft bitumen.

Redicote EM24 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal and open graded cold mix.

Bermocoll CST 818 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

Bermocoll Prime 3500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

GABROSA M 100 is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars.

Bermocoll EBM 5500 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products. Bermocoll EBM 5500 is a high viscosity grade of methyl ethyl hydroxyethyl cellulose.

Bermocoll EBM 10 000 is a non-ionic, water soluble cellulose ether. It is a high viscosity thickener with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products. Bermocoll EBM 10 000 is a high viscosity grade of methyl ethylhydroxyethyl cellulose. At equal amounts it scores a higher Stormer than other high-viscous products used.

Ethylan EF-60 is a VOC-free additive used to promote storage stability, especially at low temperatures. It acts as an anti-freezing agent, dispersant, wetting agent and freeze-thaw (FT) stabilizer in premium-grade waterborne latex paints and adhesive systems. Ethylan EF-60 can be used to replace propylene glycol, PEG and EG in these formulations to meet regulatory requirements without compromising on processability and other latex binder performance. Benefits: Lower-odor, safer formulations Better appearance and finish Compliance with environmental regulations High efficacy FT performance for a wide range of waterborne formulations Features: APEO-free VOC-free Excellent FT stability Maintains open time to impart processability Better pigment wetting and dispersion compared to traditional FT agents

Bermocoll EHM 500 is a high efficiency associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water-based paints.

Alcosperse 787 is a novel hydrophobically modified acrylic copolymer dispersing agent developed to help formulators create innovative waterborne paints and coatings with excellent performance characteristics over competitive dispersants such as water mark resistance, alkaline and salt resistance, and other related hydrotropic effects. Key Benefits Excellent color acceptance Outstanding pigment dispersing efficiency Strong hydrophobic properties Long shelf life Features Alkali resistance Good storage stability Salt resistance Water mark resistance Water resistance

Bermocoll Prime 1500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

Bermocoll EHM 300 is associative non-ionic, watersoluble cellulose ether that improves the rheological properties of water-based paints.

Bermocoll Prime 2500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance, and superior color stability. It improves the consistency, the stability, and the water retention of water-based paints.

Diamine HBG Pellets is an active adhesion agent in solid (pellet) form for hot bitumen, cut back bitumen, and soft bitumen for use in surface dressing (chipseal), and cold and warm mixes.

Bermocoll EBS 481 FQ is a non-ionic, water solublecellulose ether with enhanced enzyme resistance. Itimproves the consistency, the stability, and the waterretention of water-based products.

Redicote EM-44A is a emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chip seal, tack coat and open-graded cold mix. Emulsifier for slurry surfacing and cold mix when used with phosphoric acid.

Bermocoll EHM 200 is an associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water-based paints.

Redicote E-62 is a emulsifier for the production of rapid- and medium-setting anionic bitumen emulsions for use in chip seal (surface dressing), tack coat and open-graded cold mix

GABROSA M 300 is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars.

Diamine OLBS is an active adhesion agent for hot bitumen, cut back bitumens, soft bitumens and emulsions used in surface dressing (chipseal), and cold and warm mixes including those using reclaimed materials.

Narlex LD36V is a sodium salt of an acrylic acid copolymer supplied as an aqueous solution.

Redicote E-4819 is a emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Bermocoll EBS 451 FQ is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products.

Redicote EM44 is a liquid emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chipseal, open graded cold mix and tack coat. Emulsifier for phosphoric acid slurry and micro surfacing systems.