Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Two-part, thixotropic, translucent RTV silicone
- 10:1 Mix Ratio (Part A: Part B)
Applications & Uses
- Applications
- Application Area
- Applications
- For electronic and space applications requiring low outgassing and minimal volatile condensables to avoid condensation in sensitive devices
- As an embedding or potting compound for environmental protection of electronic assemblies and components
- Especially useful where moderate thixotropy is required
- Instructions for Use
Mixing
Thoroughly mix Part A and Part B in a 10:1 mix ratio by weight prior to use.
Vacuum Deaeration
Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply full vacuum to a container rated for use and at least four times the volume of the material being deaerated. Hold vacuum until bulk deaeration is complete.
Inhibition Concerns
Cures in contact with most materials common to electronic assembles. Exceptions include butyl and chlorinated rubbers, some RTV silicones and unreacted residues of some curing agents. Note: Some bonding applications may require the use of a primer. NuSil Technology CF1-135 silicone primer is recommended.
Adjustable Cure
Schedule Product cures a wide range of elevated temperatures and cure times to accommodate different production needs
Properties
- Appearance
- Clear
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Durometer Type A | 40.0 | — | — |
Elongat ion | 220.0 | % | — |
Flow Rat e | 0.3 (7.62 ) | in (mm) | — |
Mix Rat io | 0.417361111 | — | — |
Specific Gravity | 1.06 | — | — |
Tensile | 800 (5.52 ) | psi (MPa) | — |
Value | Units | Test Method / Conditions | |
Cure System | Platinum | — | — |
Cure at RTV | 7.0 | days | — |
Packaging & Availability
- Country Availability
- Regional Availability