Products

Polynt Group HUP 16/23 RB-7035-V is generally used in building and construction, electronic and electrical applications.

Polynt Composites’ ArmorFlex® 953 Series gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications,but should be used in any application where water and chemical resistance are needed. ArmorFlex® 953 Series also have exceptional gloss and buffing characteristics. While offering these benefits,the ArmorFlex® 953 Series gel coats have retained the important construction application qualities expected from Polynt Composites gel coats,such as resistance to porosity,tearing,and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from Polynt’s ArmorFlex® HIGH GLOSS BUFFBACK® gel coats. ArmorFlex® 953 Series gel coats have enabled customers to meet and surpass all requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,ANSI Z124.1,.2 and .3 –1995,Sec. 6.1.1. Gel coats in the 953 Series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. ArmorFlex® HIGH GLOSS BUFFBACK® gel coats are available in the same wide range of colors as other POLYCOR® gel coats. Refer to Polynt’s POLYCOR® Color Card for color selection. Standard base white ArmorFlex® is 953WJ340.

Carbamac® 43-4310 is an oil-modified polyurethane resin with good hardness and abrasion resistance balanced with fast through-dry. Manufactured in North America. All components of this product are listed on the DSL.

Aquamac® 477 styrene acrylic latex polymer was designed specifically for clear wood finishes and provides excellent clarity, hardness and mar resistance. Manufactured in North America. All components of this product are listed on the DSL.

Polynt Group SMC LS 3800 R25 RF C NERO is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, reinforced with glass fibers. SMC LS 3800 R25 RF C NERO has been developed for application where is requested anti-static protection SMC LS 3800 R25 RF C NERO joint good mechanical properties mainly for impact resistance. SMC LS 3800 R25 RF C NERO is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group HUP 19/23 RN-Color is generally used in electronic and electrical applications.

OPTIMOLD ll MONOCOMPOSANT - Mold construction. 24 hr turnaround,allows better rigidity and tool life. Use with Polycor Tooling gelcoat and skin coat. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.

Polynt Group HUP 17/29 RB-7032 is generally used in electronic and electrical applications.

Carbamac® 43-4355 is an oil-modified polyurethane resin. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 204-1829 is a medium oil alkyd resin with fast dry and good gloss.Manufactured in North America.

Rezimac® HS 216-2134 is a high solids low viscosity tung/phenolic resin for use in wood stains and varnishes. Manufactured in North America. All components of this product are listed on the DSL.

Polynt Group 55, 55X is designed for interior application; meets particular flame-retardant requirements; not recommended for parts used under direct sun exposure or prolonged water immersion. It is generally used in composites applicatons.

OPTIPLUS - Mold construction. Allows high glass fabric content. Infusion processing possible. Suitable for higher temperature applications.. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.

Polynt Group HUP 17/25 RB-Color is generally used in electronic and electrical, foundries, peroxides applications.

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

Polynt Group BMC RF 9/15 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good fire protection grade and good flow are combined into the BMC RF 9/15. BMC RF 9/15 is certified V0 3,0 mm by UL laboratories. BMC RF 9/15 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Duramac® 204-1036 is a positive-drying tofa alkyd that has excellent gloss and color retention. It can be combined with amino resins or used directly in air-dry systems to give excellent exterior durability. Manufactured in North America. All components of this product are listed on the DSL.

Lumicure® 15-1516 is UVEB curable designed for high end applications with good hardness, flexibility and chemical resistance.

Acrylamac® 16-1066 is fast dry with good color and gloss retention for use as a sole film former or modifying resin; can be formulated into FDA approvable coatings

Polynt Group BMC RF 9/20 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good fire protection grade are combined into the BMC RF 9/20. BMC RF 9/20 is certified V0 3,0 mm by UL laboratories. BMC RF 9/20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group BMC RF 600-20 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and excellent fire protection grade are combined into the BMC RF 600-20. BMC RF 600-20 is certified V0 1,7 mm by UL laboratories. BMC RF 600-20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group HUP 17/18 RN-5001-PL is generally used in electronic and electrical applications.

DISTITRON® 3584 - Pure maleic unsaturated polyester resin in styrene. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

Polynt Group HUP 21/15 RB-9010 is generally used in electronic and electrical applications.

Macopol® HS 57-5847 is a high solids VT styrene-modified alkyd designed for use in general industrial applications that require less than 340 g/l 2.83 lbs/gal VOC. This resin can also be used to formulate architectural stain-killing primers and wood primers that will meet 340 g/l VOC. Manufactured in North America. All components of this product are listed on the DSL.

Polynt Group BMC 1151 UL94 HB is certified HB 3,0 mm by UL laboratories. BMC 1151 Grigio is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group BMC RF 500/18 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good fire protection grade are combined into the BMC RF 500/18. BMC RF 500/18 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Duramac® 204-1409 is a medium oil alkyd resin. It is fast drying and can develop sharp gloss with excellent brushing properties. Manufactured in North America. All components of this product are listed on the DSL.

ARMORSTAR 30/45 (E) - Thixotropic,preaccelerated,with LSE system

Polynt Group 22, 22-01 - superior waterimpact resistance and weathering properties; resistance to staining, chalking, crazing and cracking; high gloss retention; easy sprayability. It is generally used in composites applicatons.

Polynt Group HUP 17/27 RB-7035 is generally used in electronic and electrical applications.

Polynt Group 222X is clear and transparent for granite applications. It is generally used in composites applicatons.

Aquamac® 570 is a styrene acrylic latex designed for formulation of concrete sealers. It provides excellent blush resistance at 100 g/l VOC. Manufactured in North America.

Polynt Group HUP 23/30 RB-Color is generally used in cosmetics, electronic and electrical, foundries, peroxides applications.

Polynt Group BMC RF 1600/25 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Excellent mechanical properties and good fire protection grade are combined into the BMC RF 1600/25. BMC RF 1600/25 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group 32X series are barriers type coatings developed for the composites and fiberglass industry. The 32X series have been formulated to reduce osmotic blistering, and as a print blockers, to provide a smoother gelcoat finish. This barrier coat was primarily developed for parts that are in conditions with prolonged contact with water and reduce the risk of water blistering. The 32X barrier coat are formulated to result with a fast cure, sagging resistant and ready-tospray after the addition of the proper amount of appropriate methyl ethyl ketone peroxide catalyst. Normally, dark Colors help to detect and eliminate air bubbles. However, it also can affect the quality of the final product. Contact you representative to have more details on Colors available. Because these 32X series barrier coat are formulated with special additives they have a fair resistance to UV and are not recommended for direct sunlight exposure. It would result in rapid chalking and fading.