Products

PyroBreak EX-13 is a water based flame retardant saturant for flame retardant treatment of paper, paperboard, wood or natural fibers. The product contains a wetting agent to increase the rate of penetration. The product is a phosphorous based flame retardant system and is appropriate where salt based flame retardant chemistry cannot be applied.

PyroBreak EX-8 is a water based, clear, flame retardant. It contains a water resistant and U/V stable latex polymer and a special wetting agent to increase the rate of penetration of the product into substrates such as paper, paperboard, wood, and natural fibers.

PyroCide EX-4 is a flame retardant, intumescent powder that imparts flame retardancy to water-based latex coatings, solvent based resin coatings, caulks, mastics, and sealants. The products can also be added to various plastics and polyurethane foams as a flame retardant system.

PyroCide II is a flame retardant intumescent coating comprised of an intumescent system in a water resistant polymer latex. It provides excellent flame retardancy to a variety of substrate without degrading or altering them in either their active or passive state.

PyroBreak EX-2 is a water based flame retardant system containing a wetting agent designed to increase the rate and depth at which the fire retardant will penetrate paper, paperboard, wood, and fabric substrates. The flame retardant saturant works by reducing the threshold ignition temperature and completely dehydrating the cellulose fibers. This alters the decomposition favoring the formation of non-flammable char and significantly reducing the formation of combustible tars.

PyroCoat EX-16 is a clear, water based liquid that can be used either as a coating or saturant for paper, paperboard or wood based products. EX-16 dries to a clear, hard, fire resistant ceramic like coating or if impregnated into paper or paperboard produces a higher compressive strength and somewhat brittle product.

PyroBreak EX-11 is a water solution of a flame retardant and wetting agent. The wetting agent increases the rate and depth of penetration of the flame retardant into various substrate such as paper, paperboard, wood, and cotton. The flame retardant works by reducing the threshold ignition temperature and completely dehydrating the cellulose fibers. This alters the decomposition favoring the formation of non-flammable char and significantly reducing the formation of combustible tars.

PyroCoat EX-1 is a water based, ceramic coating which, when applied to a non-flexible surface and dried, forms a hard fire resistant surface.PyroCoat EX1 bonds well to most fiberboard, wood, or wood-based surfaces without degrading or altering the material in either its active or passive state.