LNP™ COLORCOMP™ Compound NX06514

Identification & Functionality

Additives Included

Flame Retardant,

Lubricant (Unspecified)

Polymer Name

PC/ABS Alloy

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Features & Benefits

Labeling Claims

Bromine-free,

Chlorine-free,

No Added PFAS

Materials Features

Flame Retardant,

Good Aesthetics,

Good Surface Appearance,

Heat Resistance,

Lubricated,

No Added PFAS,

Non-brominated,

Non-chlorinated,

Unreinforced,

Very Good Heat Resistance

Applications & Uses

Markets

Automotive & Transportation,

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Healthcare & Pharma,

Industrial,

Personal Care,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Automotive Lighting,

Exterior & Body,

Interior

Building & Construction — Building Envelope & Roofing

Glazing & Window Elements

Building & Construction — Building Materials

Interior Fixtures,

Pipes & Plumbing

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Automotive Electronics,

Consumer Electronics,

Displays,

Lighting

Consumer Goods — Lawn & Garden

Healthcare & Pharma — Medical

Disposable Nonwovens,

Medical Devices & Assemblies,

Surgical Instruments & Trays,

Tubing & Fluids Handling

Industrial — Military & Defense

Advanced Materials

Printing & Packaging — Packaging

Food & Beverage Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Batteries,

Connectors,

Switches & Relays

Consumer Goods — Sports & Recreation

Automotive & Transportation — Transportation

Off Road & Recreational Vehicle (RV),

Rail & Mass Transit

Plastics & Elastomers End Uses

AC Charging Cabinet,

Appliances,

Automotive Applications,

Automotive Exterior Parts,

Automotive Under The Hood,

Batteries,

Building Materials,

Bus,

Cell Phones,

Commercial Appliance,

Computer Components,

Construction Applications,

Consumer Applications,

Displays,

Doors,

Electric Vehicles,

Electrical Components,

Electrical Housing,

Electrical/Electronic Applications,

Faucet System Components,

Fittings,

Fluid Handling,

Food Packaging,

Gears,

Home Appliances,

Industrial Applications,

Lighting Applications,

Medical Device Housings,

Medical Devices,

Medical Reusable Masks ,

Medical/Healthcare Applications,

Military Applications,

Pool Covers,

Pump Parts,

Recreational Vehicle Components,

Reflectors,

Specialty Vehicles,

Sporting Goods,

Surgical Devices,

Tablets,

Tarpaulins,

Turf Applications,

Water Management,

Windows

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Color

Custom

Flame Rating

UL 94 5VB,

UL 94 V0

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	62	MPa	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	40	%	ASTM D638
Flexural Stress (Yield, 2.6 mm/min, 100 mm span) ¹¹	102	MPa	ASTM D790
Flexural Modulus (at 2.6 mm/min, 100 mm span) ¹¹	2650	MPa	ASTM D790
Hardness (Rockwell R) ¹¹	123	—	ASTM D785
Hardness (Rockwell R) ¹¹	123	—	ISO 2039-2
Taber Abrasion (CS-17, 1 kg) ¹¹	54	mg/1000cy	ASTM D1044
Tensile Stress (Yield, 50 mm/min) ¹¹	60	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹¹	50	MPa	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	4	%	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	min. 50	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	2800	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	90	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	2700	MPa	ISO 178
Ball Indentation Hardness (H358/30) ¹¹	116	MPa	ISO 2039-1

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.22	—	ASTM D792
Water Absorption (at 23°C, 24hrs) ¹¹	0.1	%	ASTM D570
Water Absorption (at 23°C, saturated) ¹¹	0.6	%	ISO 62-1
Water Absorption (at 23°C, saturated) ¹¹	0.4	%	ASTM D570
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.4 - 0.6	%	SABIC method
Mold Shrinkage (xflow, 3.2 mm) ᵍ ¹¹	0.4 - 0.6	%	SABIC method
Melt Flow Rate (at 260°C, 2.16 kgf) ¹¹	10	g/10 min	ASTM D1238
Density ¹¹	1.22	g/cm³	ISO 1183
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.2	%	ISO 62
Melt Volume Rate (at 260°C, 2.16 kg) ¹¹	12	cm³/10 min	ISO 1133

Thermal Properties

	Value	Units	Test Method / Conditions
Vicat Softening Temperature (Rate B/50) ¹¹	110	°C	ISO 306
Vicat Softening Temperature (Rate B/50) ¹¹	112	°C	ASTM D1525
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	90	°C	ASTM D648
Heat Deflection Temperature (at 0.45 MPa, 6.4 mm, Unannealed) ¹¹	104	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹	95	°C	ASTM D648
Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹	0.000072	1/°C	ASTM D696
Coefficient of Thermal Expansion (at -30°C to 30°C, xflow) ¹¹	0.000072	1/°C	ASTM D696
Thermal Conductivity ¹¹	0.2	W/m-°C	ISO 8302
Thermal Conductivity ¹¹	0.2	W/m-°C	ASTM C177
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000075	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000075	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹	0.00008	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹	0.00008	1/°C	ISO 11359-2
Ball Pressure Test (at 98°C to 102°C) ¹¹	Pass	—	IEC 60695-10-2
Vicat Softening Temperature (Rate A/50) ¹¹	118	°C	ISO 306
Vicat Softening Temperature (Rate B/120) ¹¹	112	°C	ISO 306
Heat Deflection Temperature/Be (at 0.45MPa, Edgew 120*10*4, sp=100mm) ¹¹	103	°C	ISO 75/Be
Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120*10*4, sp=100mm) ¹¹	90	°C	ISO 75/Ae
Relative Temperature Index (Electrical) ᵖ ¹¹	85	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	85	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	85	°C	UL 746B

Electrical Properties

	Value	Units	Test Method / Conditions
Volume Resistivity ¹¹	min. 1.E+15	Ω.cm	IEC 60093
Volume Resistivity ¹¹	1.00E+17	Ω.cm	ASTM D257
Surface Resistivity ¹¹	min. 1.E+16	Ω	ASTM D257
Dielectric Strength (in oil, at 3.2mm) ¹¹	17	kV/mm	IEC 60243-1
Dielectric Strength (in oil, at 3.2mm) ¹¹	19.4	kV/mm	ASTM D149
Relative Permittivity (50/60 Hz) ¹¹	2.8	—	IEC 60250
Relative Permittivity (50/60 Hz) ¹¹	3	—	ASTM D150
Relative Permittivity (100 Hz) ¹¹	3	—	ASTM D150
Dissipation Factor (at 50/60 Hz) ¹¹	0.004	—	IEC 60250
Dissipation Factor (at 50/60 Hz) ¹¹	0.005	—	ASTM D150
Dissipation Factor (at 100 Hz) ¹¹	0.0049	—	ASTM D150
Surface Resistivity (ROA) ¹¹	min. 1.E+15	Ω	IEC 60093
Dielectric Strength (in oil, at 0.8mm) ¹¹	35	kV/mm	IEC 60243-1
Dielectric Strength (in oil, at 1.6mm) ¹¹	25	kV/mm	IEC 60243-1
Relative Permittivity (1 MHz) ¹¹	2.7	—	IEC 60250
Dissipation Factor (at at 1 MHz) ¹¹	0.006	—	IEC 60250
Comparative Tracking Index ¹¹	600	V	IEC 60112
Comparative Tracking Index (UL, PLC) ¹¹	0	PLC Code	UL 746A
High Ampere Arc Ignition (PLC 0) ¹¹	min. 1.5	mm	UL 746A
Hot Wire Ignition (PLC 1) ¹¹	min. 3	mm	UL 746A
Hot Wire Ignition (PLC 2) ¹¹	min. 2.5	mm	UL 746A
High Voltage Arc Track Rate (PLC) ¹¹	2	PLC Code	UL 746A
Hot Wire Ignition (PLC 3) ¹¹	min. 1.5	mm	UL 746A
Arc Resistance (Tungsten, PLC) ¹¹	6	PLC Code	ASTM D495

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	534	J/m	ASTM D256
Izod Impact (Notched, at -30°C) ¹¹	160	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	61	J	ASTM D3763
Instrumented Dart Impact Total Energy (at -30°C) ¹¹	54	J	ASTM D3763
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	No break	kJ/m²	ISO 180/1U
Izod Impact (Unnotched, 80*10*4, at -30°C) ¹¹	No break	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	44	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80*10*4, at -30°C) ¹¹	14	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	45	kJ/m²	ISO 179/1eA
Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	15	kJ/m²	ISO 179/1eA
Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹	No break	kJ/m²	ISO 179/1eU
Charpy Impact (at -30°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹	No break	kJ/m²	ISO 179/1eU

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ¹	80 - 90	°C	—
Drying Time ¹	3 - 4	Hrs	—
Drying Time (Cumulative) ¹	8	Hrs	—
Maximum Moisture Content ¹	0.04	%	—
Melt Temperature ¹	245 - 275	°C	—
Nozzle Temperature ¹	245 - 275	°C	—
Front - Zone 3 Temperature ¹	245 - 275	°C	—
Middle - Zone 2 Temperature ¹	220 - 275	°C	—
Rear - Zone 1 Temperature ¹	220 - 255	°C	—
Mold Temperature ¹	60 - 80	°C	—
Back Pressure ¹	0.3 - 0.7	MPa	—
Screw Speed ¹	40 - 70	rpm	—
Shot to Cylinder Size ¹	30 - 80	%	—
Vent Depth ¹	0.038 - 0.076	mm	—
Hopper Temperature ¹	60 - 80	°C	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94V-0 Flame Class Rating) ᵖ	min. 1.5	mm	UL 94
UL Recognized (94-5VB Flame Class Rating) ᵖ	min. 2.5	mm	UL 94
Oxygen Index (LOI) ᵖ	32	%	ASTM D2863
Glow Wire Ignitability Temperature (at 3.0 mm) ᵖ	800	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature (at 2.5 mm) ᵖ	800	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature (at 2.0 mm) ᵖ	800	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature (at 1.5 mm) ᵖ	800	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature (at 1.0 mm) ᵖ	825	°C	IEC 60695-2-13
Glow Wire Flammability Index (at 3 mm) ᵖ	960	°C	IEC 60695-2-12
Glow Wire Flammability Index (at 2.5 mm) ᵖ	960	°C	IEC 60695-2-12
Glow Wire Flammability Index (at 2 mm) ᵖ	960	°C	IEC 60695-2-12
Glow Wire Flammability Index (at 1.5 mm) ᵖ	960	°C	IEC 60695-2-12
Glow Wire Flammability Index (at 1 mm) ᵖ	960	°C	IEC 60695-2-12

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ¹ Back Pressure, Screw Speed, Shot to Cylinder Size and Vent Depth are only mentioned as general guidelines. These may not apply or need adjustment in specific situations such as low shot sizes, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Regional Availability

• Americas
• Asia
• Europe
• North America