Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Processing Information (Extrusion)
- Impact Properties
- Flame Characteristics
- Note
¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Value | Units | Test Method / Conditions | |
Density ¹¹ | 1.29 | g/cm³ | ISO 1183 |
Melt Volume Rate (at 250°C, 2.16 kg) ¹¹ | 4 | cm³/10 min | ISO 1133 |
Moisture Absorption (at 23°C, 50% RH, Equilibrium) ¹¹ | 0.12 | % | ISO 62-4 |
Value | Units | Test Method / Conditions | |
Tensile Modulus (at 1 mm/min) ¹¹ | 3850 | MPa | ISO 527 |
Tensile Stress (Yield, 5 mm/min) ¹¹ | 50 | MPa | ISO 527 |
Tensile Stress (Break, 5 mm/min) ¹¹ | 42 | MPa | ISO 527 |
Tensile Strain (Yield, 5 mm/min) ¹¹ | 3.6 | % | ISO 527 |
Tensile Strain (Break, 5 mm/min) ¹¹ | 7 | % | ISO 527 |
Flexural Modulus (at 2 mm/min) ¹¹ | 3800 | MPa | ISO 178 |
Flexural Strength (at 2 mm/min) ¹¹ | 83 | MPa | ISO 178 |
Tensile Modulus (at 5 mm/min) ¹¹ | 3900 | MPa | ASTM D638 |
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹ | 50 | MPa | ASTM D638 |
Tensile Stress (Break, Type I, 5 mm/min) ¹¹ | 41 | MPa | ASTM D638 |
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹ | 3.8 | % | ASTM D638 |
Tensile Strain (Break, Type I, 5 mm/min) ¹¹ | 6.8 | % | ASTM D638 |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 118 | °C | ISO 75/Af |
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 126 | °C | ISO 75/Bf |
Vicat Softening Temperature (Rate B/50) ¹¹ | 124 | °C | ISO 306 |
Vicat Softening Temperature (Rate B/120) ¹¹ | 126 | °C | ISO 306 |
Coefficient of Thermal Expansion (at -40°C to 90°C, flow) ¹¹ | 0.000036 | 1/°C | ISO 11359-2 |
Coefficient of Thermal Expansion (at -40°C to 90°C, xflow) ¹¹ | 0.000074 | 1/°C | ISO 11359-2 |
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 116 | °C | ASTM D648 |
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹ | 125 | °C | ASTM D648 |
Ball Pressure Test (at 123°C to 127°C) ¹¹ | Pass | — | IEC 60695-10-2 |
Value | Units | Test Method / Conditions | |
Barrel - Zone 1 Temperature | 210 - 260 | °C | — |
Barrel - Zone 2 Temperature | 220 - 270 | °C | — |
Barrel - Zone 3 Temperature | 230 - 280 | °C | — |
Drying Temperature | 90 - 105 | °C | — |
Drying Time | 3 - 6 | Hrs | — |
Maximum Moisture Content | 0.05 | % | — |
Melt Temperature | 230 - 280 | °C | — |
Value | Units | Test Method / Conditions | |
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 17 | kJ/m² | ISO 180/1A |
Izod Impact (Notched, 80*10*4, at -30°C) ¹¹ | 10 | kJ/m² | ISO 180/1A |
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 86 | kJ/m² | ISO 180/1U |
Izod Impact (Unnotched, 80*10*4, at -30°C) ¹¹ | 68 | kJ/m² | ISO 180/1U |
Izod Impact (Notched, 80*10*3, at 23°C) ¹¹ | 16 | kJ/m² | ISO 180/1A |
Izod Impact (Notched, 80*10*3, at -30°C) ¹¹ | 9 | kJ/m² | ISO 180/1A |
Izod Impact (Unnotched, 80*10*3, at 23°C) ¹¹ | 91 | kJ/m² | ISO 180/1U |
Izod Impact (Unnotched, 80*10*3, at -30°C) ¹¹ | 69 | kJ/m² | ISO 180/1U |
Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹ | 15 | kJ/m² | ISO 179/1eA |
Charpy Impact (at 23°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹ | 96 | kJ/m² | ISO 179/1eU |
Izod Impact (Notched, at 23°C) ¹¹ | 143 | J/m | ASTM D256 |
Izod Impact (Unnotched, at 23°C) ¹¹ | 1200 | J/m | ASTM D4812 |
Value | Units | Test Method / Conditions | |
Fire Safety Hazard Level (Requirement set R6, 2 to 4 mm) ¹¹ | HL2 | — | EN 45545-2: 2020 revision |
Heat Release (MAHRE, 50 kW/m², 2 to 4 mm) ¹¹ | max. 90 | kW/m² | ISO 5660-1 |
Smoke Density (DS-4, 50 kW/m², 2 to 4 mm) ¹¹ | max. 300 | — | ISO 5659-2 |
Smoke Density (VOF4, 50 kW/m², 2 to 4 mm) ¹¹ | max. 600 | — | ISO 5659-2 |
Smoke Toxicity (CITG, 8 min, 50 kW/m², 2 to 4 mm) ¹¹ | max. 0.9 | — | ISO 5659-2 |
Regulatory & Compliance
Packaging & Availability
- Country Availability
- Regional Availability