LNP LUBRICOMP™ Compound - JX91198 - SABIC's Specialty

Identification & Functionality

Additives Included: Lubricant (Unspecified),
Proprietary
Chemical Family: Polysulfones
Fillers Included: Carbon Fiber,
Carbon/Graphite/PTFE,
Graphite,
PTFE
Polymer Name: Polyethersulfone (PES)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Materials Features: Bearing Grade,
Friction Resistant,
High Temperature Resistance,
Lubricated,
Very Good Heat Resistance,
Wear Resistant
Wear and Friction Solutions High Temperature Materials: Design engineer look to replace metal parts and components with thermoplastics whenever possible. Not only can they be produced more cost-effectively, they offer greater design flexibility, weigh less and resist corrosion. The availability of high temperature resins like PEEK, PPS, PPA and PEI can stretch the use of thermoplastic even further.

If you can’t stand the heat… internally lubricated compounds: While auto under-the-hood and industrial machinery might be the first to come to mind, high temperature application are not always driven by hot operating environment. Some application that may never see elevated use temperatures have to survive a hot manufacturing environment (lead-free solder, paint ovens). High temperature generally feature good chemical resistance as well.

Internally lubricated compounds:

The addition of an internal lubricant to a thermoplastic material can improve the wear resistance and can reduce the coefficient of friction in plastic parts. Traditional lubricants like PTFE and PTFE/Si blends are common. Compounds made with high temperature resins can provide wear performance comparable with externally lubricated metal parts.
Product Features: FM: 9.24 GPa

HDT: 228°C

Tight dimensional tolerance

Superior wear and bearing performance

Applications & Uses

Markets: Building & Construction,
Consumer Goods,
Electrical & Electronics,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Building & Construction — Decorative Materials & Finishes
Artificial Turf
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Consumer Goods — Lawn & Garden
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Electrical & Electronics — Parts & Components
Connectors,
Switches & Relays
Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses: Appliances,
Bearings,
Building Materials,
Cell Phones,
Commercial Appliance,
Computer Components,
Consumer Applications,
Containers,
Displays,
Doors,
Electrical Components,
Electrical/Electronic Applications,
Gears,
Home Appliances,
Personal Accessories,
Pool Covers,
Slider,
Sporting Goods,
Tablets,
Tarpaulins,
Turf Applications,
Windows
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties
Physical Properties
Thermal Properties
Electrical Properties
Impact Properties
Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Mold Shrinkage (on Tensile Bar, flow) ᵍ ¹¹	0.3 - 0.5	%	SABIC method
Wear Factor Washer ¹¹	20	10^-10 in^5-min/ft-lb-hr	ASTM D3702 Modified: Manual
Wear Factor Washer ¹¹	4	10^-10 in^5-min/ft-lb-hr	ASTM D3702 Modified: Manual
Dynamic COF ¹¹	0.43	—	ASTM D3702 Modified: Manual
Dynamic COF ¹¹	0.34	—	ASTM D3702 Modified: Manual
Static COF ¹¹	0.34	—	ASTM D3702 Modified: Manual
Static COF ¹¹	0.27	—	ASTM D3702 Modified: Manual
Density ¹¹	1.5	g/cm³	ISO 1183
Density ¹¹	1.5	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.41	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.2	%	ASTM D955
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.17	%	ISO 294
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.4	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.41	%	ISO 294
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.53	%	ISO 62

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	211	°C	ASTM D648
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	228	°C	ISO 75/Af

	Value	Units	Test Method / Conditions
Surface Resistivity ¹¹	100 - 100000	Ω	ASTM D257

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	20	kJ/m²	ISO 180/1U
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	26	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80104, at 23°C) ¹¹	6	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80104, at 23°C) ¹¹	7	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, at 23°C) ¹¹	331	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	42	J/m	ASTM D256
Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹	4	J	ASTM D3763
Multi-Axial Impact ¹¹	2	J	ISO 6603

Packaging & Availability

LNP™ LUBRICOMP™ Compound JX91198