LNP™ LUBRICOMP™ Compound KFP032

Identification & Functionality

Fillers Included

Glass Fiber,

PTFE,

PTFE/Silicone,

Silicone,

Silicone Oil

Polymer Name

Polyacetal Copolymer (POM)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyacetals

Features & Benefits

Materials Features

Friction Resistant,

Wear Resistant

Applications & Uses

Markets

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Personal Care,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays

Consumer Goods — Lawn & Garden

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors,

Switches & Relays

Consumer Goods — Sports & Recreation

Plastics & Elastomers End Uses

Appliances,

Building Materials,

Cell Phones,

Commercial Appliance,

Computer Components,

Consumer Applications,

Containers,

Displays,

Doors,

Electrical Components,

Electrical/Electronic Applications,

Home Appliances,

Personal Accessories,

Pool Covers,

Sporting Goods,

Tablets,

Tarpaulins,

Turf Applications,

Windows

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	67	MPa	ASTM D638
Tensile Stress (Break) ¹¹	57	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	2.6	%	ASTM D638
Tensile Strain (Break) ¹¹	2.5	%	ASTM D638
Flexural Stress ¹¹	82	MPa	ASTM D790
Flexural Stress ¹¹	95	MPa	ISO 178
Tensile Modulus (at 5 mm/min) ¹¹	5020	MPa	ASTM D638
Flexural Modulus ¹¹	3720	MPa	ASTM D790
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	100	MPa	ASTM D790
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	94	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	4180	MPa	ASTM D790
Tensile Stress (Break, 5 mm/min) ¹¹	64	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	2.5	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	4810	MPa	ISO 527
Flexural Modulus (at 2 mm/min) ¹¹	4120	MPa	ISO 178

Physical Properties

	Value	Units	Test Method / Conditions
Density ¹¹	1.51	g/cm³	ASTM D792
Specific Gravity ¹¹	1.52	—	ASTM D792

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	155	°C	ASTM D648
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	162	°C	ASTM D648
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	161	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	148	°C	ISO 75/Af

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	40	J/m	ASTM D256
Izod Impact (Unnotched, at 23°C) ¹¹	381	J/m	ASTM D4812
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	5	J	ASTM D3763
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	24	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	3	kJ/m²	ISO 180/1A

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	80	°C	—
Drying Time ⁷	4	Hrs	—
Melt Temperature ⁷	200 - 215	°C	—
Front - Zone 3 Temperature ⁷	210 - 220	°C	—
Middle - Zone 2 Temperature ⁷	195 - 205	°C	—
Rear - Zone 1 Temperature ⁷	175 - 190	°C	—
Mold Temperature ⁷	80 - 110	°C	—
Back Pressure ⁷	0.2 - 0.3	MPa	—
Screw Speed ⁷	30 - 60	rpm	—

Note

• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Packaging & Availability

Regional Availability

• Americas
• Asia
• North America