company tower banner
SABIC's Specialties Business Company Logo

LNP™ LUBRICOMP™ Compound OL009

1 of 365 products in this brand
LNP LUBRICOMP OL009 compound is based on Polyphenylene Sulfide (PPS) - linear resin containing 45% PTFE. Added features of this grade include: Wear Resistant.

Polymer Name: Polyphenylene Sulfide (PPS)

Processing Methods: Injection Molding

Fillers Included: PTFE

Additives Included: Lubricant (PTFE)

Flexural Modulus: 2590.0 - 2590.0 MPa

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Additives Included
Fillers Included
Plastics & Elastomers Functions
Technologies

Features & Benefits

Applications & Uses

Plastics & Elastomers Processing Methods

Properties

Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Stress (Break) ¹¹37MPaASTM D638
Tensile Strain (Break) ¹¹3.1%ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹2640MPaASTM D638
Flexural Stress ¹¹68MPaASTM D790
Flexural Modulus ¹¹2590MPaASTM D790
Coefficient of Friction (on steel, Static) ¹¹0.14-ASTM D1894
Coefficient of Friction (on steel, Kinetic) ¹¹0.23-ASTM D1894
Physical Properties
ValueUnitsTest Method / Conditions
Density ¹¹1.61g/cm³ASTM D792
Thermal Properties
ValueUnitsTest Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹136°CASTM D648
Impact Properties
ValueUnitsTest Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹32J/mASTM D256
Injection Molding
ValueUnitsTest Method / Conditions
Drying Temperature ⁷120 - 150°C-
Drying Time ⁷4.00E+00Hrs-
Melt Temperature ⁷315 - 320°C-
Front - Zone 3 Temperature ⁷330 - 345°C-
Middle - Zone 2 Temperature ⁷320 - 330°C-
Rear - Zone 1 Temperature ⁷305 - 315°C-
Mold Temperature ⁷140 - 165°C-
Back Pressure ⁷0.2 - 0.3MPa-
Screw Speed ⁷30 - 60rpm-
Note
  • ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
  • ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
 

Packaging & Availability

Regional Availability
  • Americas
  • Asia
  • Europe
  • North America