LNP LUBRICOMP™ Compound - UCL36ASP - SABIC's Specialty

Identification & Functionality

Additives Included: Heat Stabilizer,
Lubricant (PTFE),
Lubricant (Unspecified),
Mold Release Agent
Chemical Family: Polyamides
Fillers Included: Carbon Fiber,
PTFE
Polymer Name: Polyphthalamide (PPA)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
Polyamides

Features & Benefits

Materials Features: Electrically Conductive,
Friction Resistant,
Good Mold Release,
Heat Stabilized,
High Stiffness,
High Strength,
High Temperature Resistance,
Light Weight,
Lubricated,
Very Good Heat Resistance,
Wear Resistant

Applications & Uses

Markets: Automotive & Transportation,
Consumer Goods,
Electrical & Electronics,
Industrial
Applications: Consumer Goods — Appliances & Electronics
Automotive & Transportation — Automotive
Aftermarket Parts & Components,
Powertrain & UTH
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Consumer Goods — Lawn & Garden
Electrical & Electronics — Parts & Components
Semiconductor Manufacturing,
Sensors & Actuators
Plastics & Elastomers End Uses: Appliances,
Automotive Applications,
Automotive Under The Hood,
Bearings,
Cell Phones,
Commercial Appliance,
Computer Components,
Consumer Applications,
Displays,
Electric Vehicles,
Electrical/Electronic Applications,
Electronic Components,
Gears,
Heavy Vehicles,
Home Appliances,
Industrial Applications,
Semiconductor Applications,
Sensor,
Slider,
Tablets
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties
Physical Properties
Thermal Properties
Electrical Properties
Impact Properties
Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Stress (Break, 5 mm/min) ¹¹	256	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	1.3	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	25100	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	340	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	19900	MPa	ISO 178

	Value	Units	Test Method / Conditions
Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹	0.000008	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹	0.000051	1/°C	ISO 11359-2
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	270	°C	ISO 75/Af

	Value	Units	Test Method / Conditions
Surface Resistivity ¹¹	10 - 1000	Ω	ASTM D257

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	40	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80104, at 23°C) ¹¹	7	kJ/m²	ISO 180/1A

Packaging & Availability

LNP™ LUBRICOMP™ Compound UCL36ASP