LNP THERMOCOMP™ Compound - 9F005P - SABIC's Specialty

Identification & Functionality

Chemical Family: Polycarbonate (PC)
Fillers Included: Glass Fiber
Polymer Name: Polycarbonate (PC)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics,
Polycarbonates

Features & Benefits

Materials Features: Cost Effective,
Dimensional Stability,
Good Processability,
High Flowability,
High Stiffness

Applications & Uses

Markets: Automotive & Transportation,
Building & Construction,
Consumer Goods,
Electrical & Electronics,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Automotive & Transportation — Automotive
Exterior & Body
Building & Construction — Decorative Materials & Finishes
Artificial Turf
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Consumer Goods — Lawn & Garden
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Electrical & Electronics — Parts & Components
Batteries,
Connectors,
Switches & Relays
Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses: Automotive Applications,
Automotive Exterior Parts,
Battery Cases,
Building Materials,
Cell Phones,
Clamp Shell,
Computer Components,
Consumer Applications,
Containers,
Displays,
Doors,
Electrical Components,
Electrical/Electronic Applications,
Garden Equipment,
Lawn Equipment,
Personal Accessories,
Pool Covers,
Sporting Goods,
Tablets,
Tarpaulins,
Turf Applications,
Windows
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Flame Rating: UL 94 HB
Physical Properties
Mechanical Properties
Thermal Properties
Electrical Properties
Impact Properties
Injection Molding
Flame Characteristics
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.

	Value	Units	Test Method / Conditions
Melt Flow Rate (at 260°C, 5.0 kgf) ¹¹	56	g/10 min	ASTM D1238
Melt Volume Rate (at 260°C, 5.0 kg) ¹¹	47	cm³/10 min	ISO 1133
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.01	%	ISO 62
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.34 - 0.44	%	ISO 294
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.34 - 0.44	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.53	%	ISO 294
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.53	%	ASTM D955
Specific Gravity ¹¹	1.33	—	ASTM D792
Water Absorption (at 23°C, 24hrs) ¹¹	0.06	%	ASTM D570
Water Absorption (at 23°C, saturated) ¹¹	0.06	%	ISO 62-1
Density ¹¹	1.32	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.01	%	ASTM D570

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	130	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	130	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	2	%	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	2	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	8245	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	166	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	7250	MPa	ASTM D790
Tensile Stress (Yield, 5 mm/min) ¹¹	105	MPa	ISO 527
Tensile Stress (Break, 5 mm/min) ¹¹	105	MPa	ISO 527
Tensile Strain (Yield, 5 mm/min) ¹¹	2	%	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	3	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	8277	MPa	ISO 527
Flexural Stress ¹¹	168	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	7987	MPa	ISO 178

	Value	Units	Test Method / Conditions
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000268	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000268	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.0000567	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.0000567	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹	0.0000247	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹	0.000066	1/°C	ISO 11359-2
Vicat Softening Temperature (Rate B/50) ¹¹	129	°C	ISO 306
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	135	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	130	°C	ASTM D648
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	135	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	130	°C	ISO 75/Af

	Value	Units	Test Method / Conditions
Comparative Tracking Index ¹¹	200	V	IEC 60112

	Value	Units	Test Method / Conditions
Charpy Impact (at 23°C, Unnotch Edgew 80104 sp=62mm) ¹¹	33	kJ/m²	ISO 179/1eU
Charpy Impact (at 23°C, V-notch Edgew 80104 sp=62mm) ¹¹	9	kJ/m²	ISO 179/1eA
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	27	kJ/m²	ISO 180/1U
Izod Impact (Unnotched, at 23°C) ¹¹	449	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	98	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	7	J	ASTM D3763
Izod Impact (Notched, 80104, at 23°C) ¹¹	9	kJ/m²	ISO 180/1A

	Value	Units	Test Method / Conditions
UL Recognized (94HB Flame Class Rating) ᵖ	min. 0.75	mm	UL 94

Regulatory & Compliance

Packaging & Availability

LNP™ THERMOCOMP™ Compound 9F005P