Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Mechanical Recycling
Process
Debris are washed, melted & transformed into raw material for a new process. Focus on responsible sourcing of high-quality waste streams
Certification
Third-party certification of PCR content conducted by SCS Global Services
Value Proposition
- 21-80% post-consumer recycled content
- Meeting RoHS1 guidelines
- Provides CO2
- reduction & waste depletion options
- Non-brominated & non-chlorinated flame retardant systems
- Up to 2 extra EPEAT points can be achieved
- Broad color space, enhanced performance via
- blending with copolymers
- Drop in solution to existing tools
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Potential Applications
PC based LNP THERMOCOMP™ compounds may be qualified to use in consumer electronics, industrial applications for combination of dimensional stability, thin wall and non-Br/Cl Eco FR systems.
Properties
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Impact Properties
- Injection Molding
- Flame Characteristics
- Note
- ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
- ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
| Value | Units | Test Method / Conditions | |
| Density ¹¹ | 1.35 | g/cm³ | ASTM D792 |
| Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹ | 12 | g/10 min | ASTM D1238 |
| Melt Flow Rate (at 300°C, 2.16 kgf) ¹¹ | 25 | g/10 min | ASTM D1238 |
| Melt Volume Rate (at 300°C, 1.2 kg) ¹¹ | 10 | cm³/10 min | ISO 1133 |
| Melt Volume Rate (at 300°C, 2.16 kg) ¹¹ | 21 | cm³/10 min | ISO 1133 |
| Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 0.2 - 0.4 | % | ASTM D955 |
| Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 0.2 - 0.4 | % | ASTM D955 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.03 | % | ISO 62-1 |
| Value | Units | Test Method / Conditions | |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 6050 | MPa | ASTM D790 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 6150 | MPa | ISO 178 |
| Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹ | 158 | MPa | ASTM D790 |
| Flexural Stress (Break, 2 mm/min) ¹¹ | 160 | MPa | ISO 178 |
| Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹ | 161 | MPa | ASTM D790 |
| Flexural Stress (Yield, at 2 mm/min) ¹¹ | 161 | MPa | ISO 178 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 6650 | MPa | ISO 527 |
| Tensile Modulus (at 5 mm/min) ¹¹ | 6700 | MPa | ASTM D638 |
| Tensile Strain (Break, 5 mm/min) ¹¹ | 2.6 | % | ISO 527 |
| Tensile Strain (Break, Type I, 5 mm/min) ¹¹ | 2.6 | % | ASTM D638 |
| Tensile Stress (Break, 5 mm/min) ¹¹ | 107 | MPa | ISO 527 |
| Tensile Stress (Break, Type I, 5 mm/min) ¹¹ | 109 | MPa | ASTM D638 |
| Value | Units | Test Method / Conditions | |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ | 0.000025 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ | 0.000063 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹ | 0.000026 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹ | 0.000075 | 1/°C | ASTM E831 |
| Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹ | 120 | °C | ASTM D648 |
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 115 | °C | ASTM D648 |
| Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 116 | °C | ISO 75/Af |
| Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 121 | °C | ISO 75/Bf |
| Relative Temperature Index (Electrical) ᵖ ¹¹ | 80 | °C | UL 746B |
| Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ | 80 | °C | UL 746B |
| Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ | 80 | °C | UL 746B |
| Vicat Softening Temperature (Rate B/120) ¹¹ | 125 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/50) ¹¹ | 122 | °C | ISO 306 |
| Value | Units | Test Method / Conditions | |
| Comparative Tracking Index (UL, PLC) ¹¹ | 3 | PLC Code | UL 746A |
| Dielectric Constant (at 1.1 GHz) ¹¹ | 3.25 | — | SABIC method |
| Dielectric Constant (at 1.9 GHz) ¹¹ | 3.26 | — | SABIC method |
| Dielectric Constant (at 10 GHz) ¹¹ | 3.26 | — | SABIC method |
| Dielectric Constant (at 5 GHz) ¹¹ | 3.26 | — | SABIC method |
| Dissipation Factor (at 1.1 GHz) ¹¹ | 0.0068 | — | SABIC method |
| Dissipation Factor (at 1.9 GHz) ¹¹ | 0.0069 | — | SABIC method |
| Dissipation Factor (at 10 GHz) ¹¹ | 0.0073 | — | SABIC method |
| Dissipation Factor (at 5 GHz) ¹¹ | 0.0071 | — | SABIC method |
| Surface Resistivity ¹¹ | min. 1.0E+16 | Ω | ASTM D257 |
| Volume Resistivity ¹¹ | min. 1.0E+16 | Ω.cm | ASTM D257 |
| Value | Units | Test Method / Conditions | |
| Instrumented Dart Impact Total Energy (at 23°C) ¹¹ | 22 | J | ASTM D3763 |
| Izod Impact (Notched, 80*10*4, at -30°C) ¹¹ | 9 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 13 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, at -30°C) ¹¹ | 90 | J/m | ASTM D256 |
| Izod Impact (Notched, at 23°C) ¹¹ | 140 | J/m | ASTM D256 |
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 41 | kJ/m² | ISO 180/1U |
| Izod Impact (Unnotched, at 23°C) ¹¹ | 680 | J/m | ASTM D4812 |
| Value | Units | Test Method / Conditions | |
| Back Pressure ⁷ | 0.1 - 0.3 | MPa | — |
| Drying Temperature ⁷ | 110 | °C | — |
| Drying Time ⁷ | 3 - 6 | Hrs | — |
| Front - Zone 3 Temperature ⁷ | 280 - 300 | °C | — |
| Maximum Moisture Content ⁷ | 0.02 | % | — |
| Melt Temperature ⁷ | 285 - 310 | °C | — |
| Middle - Zone 2 Temperature ⁷ | 270 - 290 | °C | — |
| Mold Temperature ⁷ | 80 - 110 | °C | — |
| Nozzle Temperature ⁷ | 285 - 305 | °C | — |
| Rear - Zone 1 Temperature ⁷ | 260 - 280 | °C | — |
| Screw Speed ⁷ | 50 - 90 | rpm | — |
| Value | Units | Test Method / Conditions | |
| UL Recognized (94V-0 Flame Class Rating) ᵖ | min. 0.6 | mm | UL 94 |
| UL Recognized (94V-1 Flame Class Rating) ᵖ | min. 0.5 | mm | UL 94 |
| Glow Wire Ignitability Temperature (at 2.0 mm) ᵖ | 850 | °C | IEC 60695-2-13 |
| Glow Wire Ignitability Temperature (at 1.0 mm) ᵖ | 850 | °C | IEC 60695-2-13 |
| Glow Wire Ignitability Temperature (at 1.6 mm) ᵖ | 850 | °C | IEC 60695-2-13 |
| Glow Wire Flammability Index (at 2 mm) ᵖ | 960 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at 1 mm) ᵖ | 960 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at 1.6 mm) ᵖ | 960 | °C | IEC 60695-2-12 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability