LNP™ THERMOCOMP™ Compound DX06313I

Identification & Functionality

Additives Included

Heat Stabilizer,

Impact Modifier,

Mold Release Agent,

UV Stabilizer

Chemical Family

Polycarbonate (PC)

Fillers Included

Glass Fiber

Polymer Name

Polycarbonate (PC)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics,

Polycarbonates

Features & Benefits

Materials Features

Cost Effective,

Good Mold Release,

Heat Stabilized,

High Impact Resistance,

High Modulus,

High Stiffness,

Impact Modified,

UV Stabilized

Applications & Uses

Markets

Consumer Goods,

Electrical & Electronics

Applications

Consumer Goods — Appliances & Electronics

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays

Plastics & Elastomers End Uses

Cell Phones,

Computer Components,

Displays,

Electrical/Electronic Applications,

Tablets,

Wireless Communication

Plastics & Elastomers Processing Methods

Injection Molding,

Thin Wall Injection Molding

Properties

Flame Rating

UL 94 HB

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	105	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	2.7	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	7900	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	170	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	7500	MPa	ASTM D790
Tensile Stress (Break, 5 mm/min) ¹¹	115	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	2.6	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	8300	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	175	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	7200	MPa	ISO 178

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.42	—	ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.3 - 0.5	%	SABIC method
Melt Flow Rate (at 300°C, 5.0 kgf) ¹¹	30	g/10 min	ASTM D1238
Density ¹¹	1.42	g/cm³	ISO 1183
Water Absorption (at 23°C, saturated) ¹¹	0.4	%	ISO 62-1
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.1	%	ISO 62
Melt Volume Rate (at 300°C, 5.0 kg) ¹¹	22	cm³/10 min	ISO 1133

Thermal Properties

	Value	Units	Test Method / Conditions
Vicat Softening Temperature (Rate B/50) ¹¹	142	°C	ISO 306
Vicat Softening Temperature (Rate B/50) ¹¹	142	°C	ASTM D1525
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	136	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000022	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000022	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000068	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000068	1/°C	ISO 11359-2
Vicat Softening Temperature (Rate B/120) ¹¹	143	°C	ISO 306
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	136	°C	ISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹	80	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	80	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	80	°C	UL 746B

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	160	J/m	ASTM D256
Izod Impact (Notched, at -30°C) ¹¹	130	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	25	J	ASTM D3763
Izod Impact (Unnotched, 80*10*3, at 23°C) ¹¹	54	kJ/m²	ISO 180/1U
Izod Impact (Unnotched, 80*10*3, at -30°C) ¹¹	50	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*3, at 23°C) ¹¹	18	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80*10*3, at -30°C) ¹¹	14	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹	17	kJ/m²	ISO 179/1eA
Charpy Impact (at -30°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹	15	kJ/m²	ISO 179/1eA
Charpy Impact (at 23°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹	6.50E+01	kJ/m²	ISO 179/1eU
Charpy Impact (at -30°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹	55	kJ/m²	ISO 179/1eU

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	120	°C	—
Drying Time ⁷	3 - 4	Hrs	—
Drying Time (Cumulative) ⁷	48	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	310 - 330	°C	—
Nozzle Temperature ⁷	305 - 325	°C	—
Front - Zone 3 Temperature ⁷	310 - 330	°C	—
Middle - Zone 2 Temperature ⁷	300 - 320	°C	—
Rear - Zone 1 Temperature ⁷	290 - 310	°C	—
Mold Temperature ⁷	80 - 115	°C	—
Back Pressure ⁷	0.3 - 0.7	MPa	—
Screw Speed ⁷	40 - 70	rpm	—
Shot to Cylinder Size ⁷	40 - 60	%	—
Vent Depth ⁷	0.025 - 0.076	mm	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94HB Flame Class Rating) ᵖ	min. 1.5	mm	UL 94

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America