LNP™ THERMOCOMP™ Compound EC006PXQ

Identification & Functionality

Additives Included

Flame Retardant

Chemical Family

Polyetherimide (PEI),

Polyimides (PI)

Fillers Included

Carbon Fiber

Polymer Name

Polyether Imide (PEI)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Features & Benefits

Materials Features

Cost Effective,

ESD Protection,

Electrically Conductive,

Flame Retardant,

Good Moldability,

Good Processability,

High Flowability,

High Stiffness,

High Strength,

High Temperature Resistance,

Light Weight,

Very Good Heat Resistance

Applications & Uses

Markets

Automotive & Transportation,

Building & Construction,

Consumer Goods,

Electrical & Electronics

Applications

Automotive & Transportation — Automotive

Powertrain & UTH

Building & Construction — Building Envelope & Roofing

Glazing & Window Elements

Building & Construction — Building Materials

Interior Fixtures

Electrical & Electronics — Parts & Components

Connectors,

Switches & Relays

Consumer Goods — Sports & Recreation

Automotive & Transportation — Transportation

Aerospace & Aviation

Plastics & Elastomers End Uses

Aerospace Applications,

Automotive Applications,

Automotive Under The Hood,

Building Materials,

Construction Applications,

Consumer Applications,

Electrical Components,

Electrical/Electronic Applications,

Electronic Components,

Sporting Goods

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Flexural Stress (Break, 2 mm/min) ¹¹	334	MPa	ISO 178
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	272	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	1.3 - 1.4	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	29520	MPa	ASTM D638
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	341	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	23800	MPa	ASTM D790
Tensile Stress (Break, 5 mm/min) ¹¹	248	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	1.2	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	27560	MPa	ISO 527
Flexural Modulus (at 2 mm/min) ¹¹	23060	MPa	ISO 178
Compressive Strength ¹¹	244	MPa	SABIC method
Shear Modulus ¹¹	4726	MPa	ASTM D732
Shear Strength ¹¹	128	MPa	ASTM D732

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.39	—	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.11	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.1 - 0.3	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.1 - 0.6	%	ASTM D955
Melt Flow Rate (at 380°C, 6.7 kgf) ¹¹	22	g/10 min	ASTM D1238
Poisson's Ratio ¹¹	0.44	—	ASTM E132

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	195	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 150°C, flow) ¹¹	0.0000072	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 150°C, xflow) ¹¹	0.000058	1/°C	ASTM E831

Electrical Properties

	Value	Units	Test Method / Conditions
Surface Resistivity ¹¹	1000	Ω	ASTM D257

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	581	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	81	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	12	J	ASTM D3763

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	150	°C	—
Drying Time ⁷	4 - 6	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	360 - 400	°C	—
Rear - Zone 1 Temperature ⁷	360 - 380	°C	—
Middle - Zone 2 Temperature ⁷	370 - 390	°C	—
Front - Zone 3 Temperature ⁷	380 - 400	°C	—
Nozzle Temperature ⁷	390 - 400	°C	—
Mold Temperature ⁷	140 - 180	°C	—
Back Pressure ⁷	0.3 - 0.7	MPa	—
Screw Speed (Circumferential speed) ⁷	0.2 - 0.3	m/s	—
Vent Depth ⁷	0.025 - 0.076	mm	—

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Quality Standards

FAR 25.853

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America