LNP THERMOCOMP™ Compound - ECF62 - SABIC's Specialty

Identification & Functionality

Chemical Family: Polyetherimide (PEI),
Polyimides (PI)
Fillers Included: Carbon Fiber,
Glass Fiber
Polymer Name: Polyether Imide (PEI)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Labeling Claims: No Added PFAS
Materials Features: Cost Effective,
Electrically Conductive,
High Stiffness,
High Strength,
High Temperature Application,
Light Weight,
No Added PFAS,
Very Good Heat Resistance

Applications & Uses

Markets: Building & Construction,
Consumer Goods,
Electrical & Electronics,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Building & Construction — Decorative Materials & Finishes
Artificial Turf
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Consumer Goods — Lawn & Garden
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Electrical & Electronics — Parts & Components
Connectors,
Switches & Relays
Plastics & Elastomers End Uses: Building Materials,
Cell Phones,
Computer Components,
Consumer Applications,
Containers,
Displays,
Doors,
Electrical Components,
Electrical/Electronic Applications,
Garden Equipment,
Lawn Equipment,
Personal Accessories,
Pool Covers,
Tablets,
Tarpaulins,
Turf Applications,
Windows
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties
Physical Properties
Thermal Properties
Electrical Properties
Impact Properties
Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	212	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000252	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.0000234	1/°C	ASTM E831

	Value	Units	Test Method / Conditions
Volume Resistivity ¹¹	10000000000 - 100000000000	Ω.cm	ASTM D257

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	485	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	69	J/m	ASTM D256

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	150	°C	-
Drying Time ⁷	4 - 6	Hrs	-
Maximum Moisture Content ⁷	0.02	%	-
Melt Temperature ⁷	360 - 400	°C	-
Rear - Zone 1 Temperature ⁷	360 - 380	°C	-
Middle - Zone 2 Temperature ⁷	370 - 390	°C	-
Front - Zone 3 Temperature ⁷	380 - 400	°C	-
Nozzle Temperature ⁷	390 - 400	°C	-
Mold Temperature ⁷	140 - 180	°C	-
Back Pressure ⁷	0.3 - 0.7	MPa	-
Screw Speed (Circumferential speed) ⁷	0.2 - 0.3	m/s	-
Vent Depth ⁷	0.025 - 0.076	mm	-

Packaging & Availability

LNP™ THERMOCOMP™ Compound ECF62