LNP™ THERMOCOMP™ Compound LC00AEX1

Identification & Functionality

Additives Included

Mold Release Agent

Chemical Family

Polyether Ether Ketone (PEEK)

Fillers Included

Carbon Fiber

Polymer Name

Polyetheretherketone (PEEK)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Features & Benefits

Materials Features

Cost Effective,

Dimensional Stability,

Easy To Mold,

Electrically Conductive,

Good Mold Release,

Good Moldability,

Good Processability,

High Modulus,

High Stiffness,

High Strength,

High Temperature Resistance,

Light Weight,

Low CTE,

Very Good Heat Resistance,

Wear Resistant

Applications & Uses

Markets

Automotive & Transportation,

Consumer Goods,

Electrical & Electronics,

Industrial

Applications

Consumer Goods — Appliances & Electronics

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays,

Industrial Automation

Electrical & Electronics — Parts & Components

Connectors,

Housings & Enclosures,

Semiconductor Manufacturing,

Switches & Relays

Automotive & Transportation — Transportation

Aerospace & Aviation

Plastics & Elastomers End Uses

Air Cabin Interior,

Cell Phones,

Computer Components,

Displays,

Electrical Components,

Electrical/Electronic Applications,

Electronic Components,

Enclosure,

Heavy Vehicles,

Industrial Applications,

Oil/Gas Applications,

Semiconductor Applications,

Tablets

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Flexural Strength (at 1.3 mm/min, 50 mm span) ¹¹	383	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	37000	MPa	ASTM D790
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	251	MPa	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	44000	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	1.3	%	ASTM D638
Flexural Strength (at 2 mm/min) ¹¹	404	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	39100	MPa	ISO 178
Tensile Stress (Break, 5 mm/min) ¹¹	270	MPa	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	44000	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	1.4	%	ISO 527

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.5	—	ASTM D792
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.1 - 0.2	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.2 - 0.3	%	ASTM D955
Density ¹¹	1.5	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.01	%	ISO 62

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	329	°C	ASTM D648
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	338	°C	ASTM D648
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	330	°C	ISO 75/Af
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	337	°C	ISO 75/Bf
Coefficient of Thermal Expansion (at -40°C to 120°C, flow) ¹¹	0.0000017	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 120°C, xflow) ¹¹	0.000048	1/°C	ASTM E831

Electrical Properties

	Value	Units	Test Method / Conditions
Surface Resistivity ¹¹	1000000	Ω	ASTM D257
Volume Resistivity ¹¹	1000000	Ω.cm	ASTM D257

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	68.1	J/m	ASTM D256
Izod Impact (Unnotched, at 23°C) ¹¹	503	J/m	ASTM D4812
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	7.7	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	42.9	kJ/m²	ISO 180/1U
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	6.7	kJ/m²	ISO 179/1eA
Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹	52	kJ/m²	ISO 179/1eU

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	120 - 150	°C	—
Drying Time ⁷	3 - 5	Hrs	—
Nozzle Temperature ⁷	380 - 400	°C	—
Melt Temperature ⁷	380 - 400	°C	—
Front - Zone 3 Temperature ⁷	370 - 380	°C	—
Middle - Zone 2 Temperature ⁷	360 - 370	°C	—
Rear - Zone 1 Temperature ⁷	290 - 300	°C	—
Mold Temperature ⁷	170 - 200	°C	—
Screw Speed ⁷	50 - 100	rpm	—

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America