LNP™ THERMOCOMP™ Compound NX10302

Identification & Functionality

Additives Included

Heat Stabilizer,

Impact Modifier,

Metal Deactivator,

Mold Release Agent

Fillers Included

Talc

Polymer Name

PC/ABS Alloy

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Features & Benefits

Labeling Claims

No Added PFAS

Materials Features

Cost Effective,

Excellent Dielectric Properties,

Good Mold Release,

Heat Stabilized,

Impact Modified,

No Added PFAS,

Unreinforced

Applications & Uses

Markets

Automotive & Transportation,

Consumer Goods,

Electrical & Electronics,

Personal Care,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Interior

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors,

Switches & Relays

Plastics & Elastomers End Uses

Automotive Applications,

Automotive Interior Parts,

Cell Phones,

Computer Components,

Consumer Applications,

Containers,

Displays,

Electrical Components,

Electrical/Electronic Applications,

Personal Accessories,

Tablets

Plastics & Elastomers Processing Methods

Injection Molding,

Laser Sintering (SLS)

Properties

Flame Rating

UL 94 HB

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	46	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	47	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	4.2	%	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	100	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	2480	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	80	MPa	ASTM D790
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	79	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2400	MPa	ASTM D790

Physical Properties

	Value	Units	Test Method / Conditions
Density ¹¹	1.26	g/cm³	ASTM D792
Water Absorption (at 23°C, 24hrs) ¹¹	0.01	%	ASTM D570
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.02	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.6 - 0.65	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.5 - 0.56	%	ASTM D955
Melt Volume Rate (at 260°C, 5.0 kg) ¹¹	14	cm³/10 min	ISO 1133

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	108	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000847	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000091	1/°C	ASTM E831
Relative Temperature Index (Electrical) ᵖ ¹¹	60	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	60	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	60	°C	UL 746B

Electrical Properties

	Value	Units	Test Method / Conditions
Relative Permittivity (1 GHz) ¹¹	2.74	—	IEC 60250
Dissipation Factor (at at 1 GHz) ¹¹	0.003	—	IEC 60250

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	No break	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	600	J/m	ASTM D256

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	85 - 100	°C	—
Drying Time ⁷	6 - 8	Hrs	—
Melt Temperature ⁷	250 - 290	°C	—
Nozzle Temperature ⁷	250 - 290	°C	—
Front - Zone 3 Temperature ⁷	250 - 280	°C	—
Middle - Zone 2 Temperature ⁷	250 - 270	°C	—
Rear - Zone 1 Temperature ⁷	250 - 270	°C	—
Mold Temperature ⁷	60 - 90	°C	—
Back Pressure ⁷	0.3 - 0.7	MPa	—
Screw Speed ⁷	40 - 70	rpm	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94HB Flame Class Rating) ᵖ	0.6	mm	UL 94

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America