LNP THERMOCOMP™ Compound - OF008G - SABIC's Specialty

Identification & Functionality

Chemical Family: Polyphenylene Sulfide (PPS)
Fillers Included: Glass Fiber,
Milled Glass Fiber
Polymer Name: Polyphenylene Sulfide (PPS)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Materials Features: Cost Effective,
High Linearity,
High Modulus,
High Stiffness

Applications & Uses

Markets: Building & Construction,
Consumer Goods,
Electrical & Electronics,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Building & Construction — Decorative Materials & Finishes
Artificial Turf
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Consumer Goods — Lawn & Garden
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Electrical & Electronics — Parts & Components
Connectors,
Switches & Relays
Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses: Appliances,
Building Materials,
Cell Phones,
Commercial Appliance,
Computer Components,
Consumer Applications,
Containers,
Displays,
Electrical Components,
Electrical/Electronic Applications,
Fishing Lines,
Fishing Nets,
Garden Equipment,
Home Appliances,
Lawn Equipment,
Personal Accessories,
Pool Covers,
Sporting Goods,
Tablets,
Tarpaulins,
Turf Applications
Plastics & Elastomers Processing Methods: Fused Deposition Modeling (FDM),
Injection Molding

Properties

Mechanical Properties
Physical Properties
Impact Properties
Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	104	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	1.9	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	8840	MPa	ASTM D638
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	157	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	9300	MPa	ASTM D790

	Value	Units	Test Method / Conditions
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.2 - 0.5	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.8 - 1	%	ASTM D955

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	395	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	68	J/m	ASTM D256

Packaging & Availability

LNP™ THERMOCOMP™ Compound OF008G