LNP™ THERMOCOMP™ Compound RC003SXS

Identification & Functionality

Additives Included

Heat Stabilizer

Chemical Family

Polyamides

Fillers Included

Carbon Fiber

Polymer Name

Polyamide 66 (PA 66)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Features & Benefits

Labeling Claims

No Added PFAS

Materials Features

Cost Effective,

ESD Protection,

Electrically Conductive,

Heat Stabilized,

High Stiffness,

High Strength,

Light Weight,

No Added PFAS

Applications & Uses

Markets

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Personal Care,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Automotive Electronics,

Consumer Electronics,

Displays

Consumer Goods — Lawn & Garden

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors,

Switches & Relays

Consumer Goods — Sports & Recreation

Plastics & Elastomers End Uses

Appliances,

Automotive Electronics,

Building Materials,

Cell Phones,

Commercial Appliance,

Computer Components,

Consumer Applications,

Containers,

Displays,

Electrical Components,

Electrical/Electronic Applications,

Fishing Lines,

Fishing Nets,

Garden Equipment,

Home Appliances,

Lawn Equipment,

Personal Accessories,

Pool Covers,

Sporting Goods,

Tablets,

Tarpaulins,

Turf Applications

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Flame Rating

UL 94 HB

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Break, 5 mm/min) ¹¹	170	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	2	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	13000	MPa	ISO 527
Flexural Stress (Break, 2 mm/min) ¹¹	230	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	10000	MPa	ISO 178
Hardness (Rockwell L) ¹¹	105	—	ISO 2039-2

Physical Properties

	Value	Units	Test Method / Conditions
Mold Shrinkage (on Tensile Bar, flow) ᵍ ¹¹	0.1 - 0.2	%	SABIC method
Density ¹¹	1.19	g/cm³	ISO 1183
Water Absorption (at 23°C, saturated) ¹¹	5.5	%	ISO 62-1

Thermal Properties

	Value	Units	Test Method / Conditions
Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹	0.00002	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹	0.00011	1/°C	ISO 11359-2
Vicat Softening Temperature (Rate B/120) ¹¹	255	°C	ISO 306
Heat Deflection Temperature/Be (at 0.45MPa, Edgew 120*10*4, sp=100mm) ¹¹	252	°C	ISO 75/Be
Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120*10*4, sp=100mm) ¹¹	250	°C	ISO 75/Ae

Electrical Properties

	Value	Units	Test Method / Conditions
Volume Resistivity ¹¹	178000	Ω.cm	IEC 60093
Surface Resistivity (ROA) ¹¹	178000	Ω	IEC 60093

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	5	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80*10*4, at -20°C) ¹¹	4	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80*10*4, at -40°C) ¹¹	3	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹	45	kJ/m²	ISO 179/1eU

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	120	°C	—
Drying Time ⁷	2 - 4	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	320 - 360	°C	—
Nozzle Temperature ⁷	280 - 320	°C	—
Front - Zone 3 Temperature ⁷	320 - 360	°C	—
Middle - Zone 2 Temperature ⁷	320 - 360	°C	—
Rear - Zone 1 Temperature ⁷	280 - 320	°C	—
Hopper Temperature ⁷	60 - 90	°C	—
Mold Temperature ⁷	80 - 100	°C	—

Flame Characteristics

	Value	Units	Test Method / Conditions
Oxygen Index (LOI)	28	%	ISO 4589
UL Compliant (94HB Flame Class Rating)	1.6	mm	UL 94 by SABIC-IP

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

ATEX Directives,

UL 94

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America