LNP THERMOCOMP™ Compound - XF006S - SABIC's Specialty

Identification & Functionality

Features & Benefits

Materials Features: Cost Effective,
Heat Stabilized,
High Modulus,
High Stiffness,
UL Listed

Applications & Uses

Markets: Consumer Goods,
Electrical & Electronics,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Electrical & Electronics — Parts & Components
Connectors,
Switches & Relays
Plastics & Elastomers End Uses: Cell Phones,
Computer Components,
Consumer Applications,
Containers,
Displays,
Electrical Components,
Electrical/Electronic Applications,
Personal Accessories,
Tablets
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties
Physical Properties
Thermal Properties
Impact Properties
Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Stress (Break, 5 mm/min) ¹¹	141	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	2.5	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	9020	MPa	ISO 527
Flexural Stress ¹¹	214	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	8910	MPa	ISO 178
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	138	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	2.6	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	9650	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	209	MPa	ASTM D790
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	208	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	9060	MPa	ASTM D790

	Value	Units	Test Method / Conditions
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.28	%	ISO 62
Specific Gravity ¹¹	1.36	—	ASTM D792
Density ¹¹	1.36	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.22	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.1 - 0.3	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.2 - 0.4	%	ASTM D955

	Value	Units	Test Method / Conditions
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	144	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	137	°C	ISO 75/Af
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	142	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	138	°C	ASTM D648
Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹	0.000035	1/°C	ASTM D696
Coefficient of Thermal Expansion (at -30°C to 30°C, xflow) ¹¹	0.000044	1/°C	ASTM D696

	Value	Units	Test Method / Conditions
Izod Impact (Notched, 80104, at 23°C) ¹¹	5	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	38	kJ/m²	ISO 180/1U
Multi-Axial Impact ¹¹	3	J	ISO 6603
Izod Impact (Notched, at 23°C) ¹¹	56	J/m	ASTM D256
Izod Impact (Unnotched, at 23°C) ¹¹	632	J/m	ASTM D4812
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	1.10E+01	J	ASTM D3763

Packaging & Availability

LNP™ THERMOCOMP™ Compound XF006S