Products

POLURENE M 75 is the hexamethylene diisocyanate biuret. Due to the fact that it is an aliphatic isocyanate resin, POLURENE M 75 should be suitable, when combined together with acrylic or saturated polyester resin, to obtain non yellowing coating very stable to the light with high weather resistance.

POLURENE OK. D. S is recommended for the formulation of matt and semigloss topcoats or sealers, clear and pigmented color retention and yellowing resistance are required. Due to its slightly yellowing property POLURENE OK. D. S is suitable for light pigmented paints. As well, the paint hardened with POLURENE OK. D. S has good flexibility and mechanical resistance. Due to its reactivity and its compatibility to nitrocellulose,

POLURENE MT 90 is recommended for the formulation of non yellowing high solid content and low viscosity coatings with for metal,wood and plastics. Being an aliphatic isocyanate, POLURENE MT 90 can be used in combination withacrylic or saturated polyester resins for the formulation of non yellowing coatings, showing UV light stability and excellent mechanical and chemical resistance.

POLURENE AD is recommended for two pack polyurethane systems where good surface hardness, durability, brightness and solvent resistance are required. The final properties of coatings depend on the type and on the quantity of the OH terminated polymer that is used as the first component. Due to its aromatic content, POLURENE AD can be used for indoor and outdoor coatings, when a good yellowing resistance is not requested.

REXIN DP 328 is recommended for the formulation of 2K polyurethane sealers and high gloss topcoats, clear and pigmented. REXIN DP 328 is a saturated polyester resin studied for P.U two components.REXIN DP 328 is a flexible resin and, used alone or in combination with REXIN HS 129 or other REXIN, it is possible to formulate sealers and matt finishes. These paints have excellent substrate wetting, good solvent release, fast curing and resistance to overcoating.

POLURENE MT 100 LV is recommended for the formulation of non-yellowing,high solid content and low viscosity coatings with for metal, wood and plastics. POLURENE MT 100 LV is used to prepare formulations with higher solids content, compared to standard HDI biurets and trimers. POLURENE MT 100 LV should not be thinned to below a solids content of 40%.

POLURENE M 75 is recommended for the formulation of topcoats non yellowing and outdoor resistant. POLURENE M 75 is the hexamethylene diisocyanate biuret.POLURENE M 75 is an aliphatic isocyanate resin suitable, when combined with acrylic or saturated polyester resin, to formulate non yellowing coating stable to the light with high weatherability resistance.

POLURENE M 75 is recommended for the formulation of topcoats non yellowing and outdoor resistant. POLURENE M 75 is the hexamethylene diisocyanate biuret. Due to the fact that it is an aliphatic isocyanate resin, POLURENE M 75 should be suitable when combined together with acrylic, or saturated poleyster resin, to obtain non yellowing coating very stable to the light with light weather resistance.

UCOPOL M 4054 is an urethane prepolymer recommended for the maintenance of wood, for anti-skid floors, gymnasiums and for highly abrasion resistant coatings.

UCOPOL M 541 is used for the formulation of one component and two component sealants and industrial adhesives. UCOPOL M 541 is recommended for the formulation of both sealants and coatings for concrete substrates.It can be mixed with UCOPOL M 551 in order to provide tough flexible sprayable films.

POLURGREEN FP 75 01 is Low monomer version of POLURENE FP 75K. Polyurethane adduct version in accordance with EU, BFR and FDA regulations for food packaging.

POLURENE OK-HP is recommended for the formulation of matt and semigloss topcoats or sealers, clear and pigmented color retention and yellowing resistance are required.

BLUEPUR 3037 is an aliphatic coalescent free polyurethane dispersion.The special chemical structure of BLUEPUR 3037 helps the self-crosslinking of the resin and improves the performances even when used in one-component systems. It is suitable for the formulations of sealers and top coat with high flexibility and for all those substrates that undergo post-forming after painting.

Clear and pigmented paints for ABS, PVC, PUR, Polystyrene and Paper. Good yellowing, abrasion and shock resistance.

POLURENE 60T is recommended for the formulation of pigmented and clear sealers, matt and gloss topcoats. POLURENE 60T is a very versatile polyisocyanate used for the formulation of polyurethane sealers and topcoats, also in combination with rigid resins.

POLURENE M 75 BA is a aliphatic biuret with high flexibility, suitable for the formulation of no yellowing 2K PU coating and stoving enamel.

UCOPOL W 708 is recommended for the formulation of moisture curing polyurethane coatings for wood, parquet, impregnating resins for brick walls, concrete and flooring.

UCOPOL M 2851 is recommended for Adhesion, coating for parquet, metal and plastic.

BLUEPUR 3080 is an aliphatic coalescent free polyurethane dispersion.Thanks to the special chemical structure, BLUEPUR 3080 doesn't require the use of any coalescence into the formulation. This product is for high-elasticity 1K and 2K coatings.

Prepolymer used to formulate 1K and 2K sealants and industrial adhesives. It can be mixed with UCOPOL M 551, more flexible, to adjust final properties and/or drying time.

POLURENE MT100 LLV is recommended for the formulation of topcoats non yellowing. Useful for coatings with maximum yellowing resistance and perfect leveling with low VOC content.

Polyurethane adduct for general purposes. Suitable for 2K varnishes and enamels. POLURGREEN AD-01 is recommended for the formulation of two component varnishes and enamels for parquet, wood furniture, metal, plastic and paper, hardeners for shoe market adhesive and inks.

UCOPOL M 551 is used to formulate one component and two component sealants and industrial adhesives.

POLURENE FP 75 is recommended for the formulation of:- Two component varnishes and enamels for parquet, wood furniture, metal, plastic and paper.- Two component polyurethane adhesives and inks. Product in accordance to EU,BFR and FDA regulaions for food packaging.

POLURENE HR. B. S is recommended for the industrial coating of wood and furniture for the formulation of polyurethane sealers and matt furniture finishing. POLURENEHR. B. S is recommended for the formulation of matt and semi-glossy sealers and topcoat characterized by fast initial drying and easy sandability. Compared to standard isocyanurate based on TDI, POLURENE HR. B. S has longer pot life, it is more elastic and it can tolerate a bigger quantity of aromatic solvents.

REXIN HSP 05100 is recommended for the formulation of 2K high gloss clear and pigmented polyurethane resins. REXIN HSP 05100 is a solvent free saturated polyester, it can be used to formulate high solid products to achieve VOC reduction. High flexibility and body filling are the main properties of REXIN HSP 05100. It is suitable for matt and high gloss, clear and pigmented topcoats alone or in combination with other REXIN.

POLURENE AC510 is a clear liquid. Compliance with EU and REACH.

Fast drying hardener for 2K PU system with limited yellowing. Suitable for the formulation of sealers and matt topcoats, it gives hardness to the final coating.

REXIN DP 127 is recommended mainly for high gloss 2K polyurethane coatings for indoor and outdoor application. REXIN DP 127 is a high quality resin that enable to prepare paint formulations whereexcellent hardness, high scratch resistance, gloss, abrasion and weather resistance are required.

HYDRORENE 33 is recommended as a hardener for two component water-based polyurethane systems. In such systems, according to the resin, HYDRORENE 33 can be used for painting various substrates like wood, metal, plastic.

BLUEPUR T 53 provides good adhesion on different substrate. It shows good mechanical properties, high tensile strength, high elongation at break and good modulus.

POLURENE OKD a is colorless liquid. Compliance with EU and REACH.

Aromatic-aliphatic hardener with good yellowing resistance. Suitable for polishable varnishes and enamels give to the final coating excellent hardness and good elasticity.

REXIN HSP 412 is mainly recommended for the formulation of polyurethane systems for flooring. REXIN HSP 412 is a saturated polyester resin slightly branched studied for 2K PU system. REXIN HSP 412 is mainly used in high gloss topcoat to provide good chemical resistance, surface toughness, abrasion resistance and optimum flexibility.