Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Industrial Additives Functions
Features & Benefits
- Labeling Claims
- Industrial Additives Features
Applications & Uses
- Applications
- Applicable Processes
- Industrial Additives End Use
- Applications
- TEXICRYL® 13-218 has been developed for use in surface bonding and through-bonding of synthetic fiber wadding. It will effectively prevent penetration of the fibers through the cover fabric, preserve the high loft of the wadding and facilitate handling during the making-up process. It has excellent heat and light-stability, as well as good wash and dry-clean solvent resistance.
- TEXICRYL® 13-218 is widely used as a high-loft non-woven fabric binder. Drying and Curing Cure of emulsion binders is dependent on the polymer type, catalyst concentration, temperature and time.
- TEXICRYL® 13-218 is supplied ready-catalyzed and, after drying, must be cured for 2-3 minutes at 140°C. It is recommended that synthetic fiber waddings processed with TEXICRYL® 13-218 be dried and cured in hotair ovens with efficient air movement to ensure removal of water vapor during the drying phase. When dried and cured under these conditions, TEXICRYL® 13-218 will confer dry-clean resistance, washfastness and good recovery from compression. TEXICRYL® 13-218 has an indefinite pot life at normal spray-bonding concentrations (10-25% solids content).
- TEXICRYL® 13-218 has a non-detectable formaldehyde level according to Oeko-Tex® testing, ISO 14184-1 2011.
Properties
- Physical Form
- Characteristics
- Note
*Determined by metal bar with temperature gradient.
Value | Units | Test Method / Conditions | |
Solid Content | 46 | % | — |
Viscosity (at 25°C, Brookfield RVT, Spindle 4, 100 rpm) | 75 | mPa.s | — |
pH | 6.5 | — | — |
Particle Size | 135 | nm | — |
Specific Gravity (at 25°C) | 1.08 | — | — |
Emulsifying System | Anionic | — | — |
Minimum Film Formation Temperature* | 0 | °C | — |
Glass Transition Temperature (Tg) | 30 | °C | — |
Regulatory & Compliance
- Quality Standards
Packaging & Availability
- Packaging Information
TEXICRYL® 13-218 is be supplied in drums or IBC’s (please check with your local representative). Bulk deliveries are by road tanker.
Storage & Handling
- Storage Conditions
TEXICRYL® 13-218 should be stored in the original, unopened and undamaged containers in a dry place at temperatures between 5°C and 30°C. Protect from freezing and direct sunlight.