Knowde Enhanced TDS
Identification & Functionality
- Carrier
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
Applications & Uses
- Compatible Polymers & Resins
- Cure Method
- Adhesive & Sealant Type
- Coating Type
- Applications
- TEXIPOL® 63-202 is supplied as an easy to use, low viscosity liquid that gives almost instantaneous thickening when mixed directly into aqueous formulations. As the polymer is already in solution it does not require any neutralization or addition of other additives to promote thickening.
- TEXIPOL® 63-202 can be used to thicken a wide variety of aqueous binder systems including; PVA, VAE, SBR, PVdC and acrylic and styrene acrylic copolymers. It has been used in various adhesive, sealant and coating formulations. Like other TEXIPOL® thickeners it can thicken systems as low as ~ pH 5, but is most efficient at pH>7. Typical thickener dosages are probably 0.5-2.0%, though this is system dependent and higher paste viscosities may require higher addition levels.
Properties
- Physical Form
- Appearance
- Creamy liquid
- Characteristics
- Note
*Deionised water thickened with 4% of TEXIPOL® 63-202 as supplied. Brookfield RVT, Spindle 6, 5 rpm at 25°C.
Value | Units | Test Method / Conditions | |
Specific Gravity (at 25°C) | 1.05 | — | — |
Inverse Emulsion Viscosity (Brookfield RVT, Spindle 3, 20rpm at 25°C) | 1500 | mPa.s | — |
Thickened Deionised Water | min. 35000 | mPa.s | — |
Polymer Charge | Anionic | — | — |
Packaging & Availability
- Packaging Type
- Packaging Information
TEXIPOL® 63-202 is available in drums and IBCs (please check with your local representative).
Storage & Handling
- Storage Conditions
TEXIPOL® 63-202 should be stored between 5 and 30°C in the original, unopened container in a dry, well ventilated place. Protect from freezing and direct sunlight.