Products

Crystic® Vinyl Ester Resin VE679-03PA is a pre-accelerated, DCPD modified, vinyl ester resin developed for use as a infusion resin with a wide range of gel times with various catalysts. It has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable moldings with an enhanced surface finish.

Crystic® Spray Gelcoat 92PA is a chemical resistant spray gelcoat. It is suitable for the manufacture of bathroom products such as sinks, baths, shower trays and water slides and has been used successfully in the industry for many years. It is easy to use and repair.

Texicryl® 13-070 is a styrene acrylic copolymer emulsion designed primarily as a binder for D1 ceramic tile adhesives. It has been designed to be formulated, with a wide range of filler types, into D1 tile adhesives. It acts as a binder for use in EN 12004-1and2: 2017 D1 CTAs, economic exterior and interior coatings, fence stains and flat paints.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Crystic® Polyester Resin 406COS is a non-thixotropic, non-accelerated, orthophthalic unsaturated polyester resin used for casting, artificial marble, and solid surface applications. This product has a 5-minute gel time. It contains UV absorbers, allowing very good resistance to yellowing and UV radiation.

Crystic® Polyester Resin 1124PA is an orthophthalic, low-viscosity, unsaturated polyester resin. It is supplied as a solution dissolved in monomeric styrene. This product is pre-accelerated to give a sufficient pot life for contact molding using Andonox® KP9 at normal ambient temperatures. It has been formulated to give a rapid cure time while retaining a usable pot life and a normal peak exotherm temperature. For an extra-rapid cure, the use of acetoacetonyl peroxide (Andonox® PD40) is recommended.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Decorative Casting Resin 911PA is a pre-accelerated, orthophthalic, unsaturated polyester resin. Its low viscosity helps to accept the maximum level of filler particles. This product is designed for the casting of small details, including collectibles and figurines. It has an 11-minute gel time.

Crystic® Solid Surface Casting Resin 935PA is a pre-accelerated, high-performance, isophthalic neopentyl glycol unsaturated polyester resin. It is developed specifically for the casting of solid surface products. This high-clarity, low-color resin is supplied at a low to medium viscosity in order to accept the maximum level of fillers, including aluminum trihydrate (ATH) and colored chips or natural stone. For the production of flat sheets, where quicker gel times and cure times are required, Crystic® 935PAHR is available on request.

Crystic® Resin PD10031PA – 01 is an acrylic-modified, UV-stabilized, high-quality, isophthalic neopentyl glycol unsaturated polyester resin. This product has been developed specifically for the casting of solid surfaces, where the applications can range from sanitary ware to vanity units to worktops. It is a low-color polyester resin designed to accept the maximum level of filler, such as aluminum trihydride (ATH) and colored chips or ground natural stone.

Crystic® Decorative Casting Resin 911PASA is a pre-accelerated, orthophthalic, unsaturated polyester resin. Its low viscosity helps to accept the maximum level of filler particles. This product is designed for the casting of small details, including collectibles and figurines. It has a 20-minute gel time.

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.

Crystic® Polyester Resin 195 is a light-stabilized polyester resin containing styrene and methyl methacrylate. When combined with powder-bonded "E" glass, it is recommended for the production of maximum-clarity GRP sheeting with up to 80% light transmission. This product has a 25-minute gel time.

Crystic® Resin S15.6 is a very flexible unsaturated polyester resin based on adipic acid. It can be used alone or in conjunction with other polyester resins for the manufacturing of flexible products. Impregnating resins particularly isophtalic resins can be flexibilised by addition of Crystic® Resin S15.6 without any significant impact on the chemical resistance properties.

Crystic® Polyester Resin 123PA is a medium-thixotropic, tropicalized, pre-accelerated waxed unsaturated polyester resin. This resin is specially formulated to provide rapid wetting and impregnation of the reinforcement. It is ideally suited for the building of boats, water tanks, bathtubs, shower trays, and other products where water resistance is an important factor.