Products

SPP-25 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

Shamrock SST-3 Tan is a micronized, tan PTFE powder.

S-396 N1 is a finely ground, crystalline grade of polyethylene wax with a high melt point and good solvent resistance.

SST®-3 is a white low MW PTFE micropowder with particle size distribution at a mean value of 5 µm. SST products are Shamrock’s PTFE micropowders that are defined by particle size and distribution molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST products are used for their ability to provide slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

SST®-2 is a white low MW PTFE micropowder with particle size distribution at a mean value of 8 µm. SST®-2 products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to produce slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

SST®-2P is an off-white to light gray low MW PTFE powder with a particle size mean value of 8 µm. SST® products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

TexMATTE 6014 is a cross-linked polymethyl methacrylate product. Shamrock’s Texture Series consists of polyethylene, polypropylene, polytetrafluoroethylene (PTFE), and PMMA (Texture-W, SPP, FluoroTEX, TexMATTE) powders in a controlled range of particle sizes. These stir in powders provide a unique feel and texture allowing for customized surface finishes.

SST®-2D is a white low MW PTFE powder with a particle size mean value of 7 µm. SST®-2D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST® products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

SST®-3D is a white low MW PTFE powder with a particle size mean value of 5 µm. SST®-3D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST® products are Shamrock’s PTFE micro powders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, non- stick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

SST® -3PS is a charcoal gray colored low MW PTFE powder with a particle size mean value of 5 µm. SST® products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

TexMATTE 6030 is a cross-linked polymethyl methacrylate product. Shamrock’s Texture Series consists of polyethylene, polypropylene, polytetrafluoroethylene (PTFE), and PMMA (Texture-W, SPP, FluoroTEX, TexMATTE) powders in a controlled range of particle sizes. These stir in powders provide a unique feel and texture allowing for customized surface finishes.

SST®-3P is an off-white to light gray low MW PTFE powder with a particle size mean value of 5 µm. SST® products are Shamrock’s PTFE micro powders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, non- stick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

These PTFE powders are Natural Prime PTFE micronized to various particle sizes and are FDA compliant for applications requiring food contact. MicroFLON 1437FG is designed for food contact applications. These applications include: food processing, machine parts, and medical devices.

S-394 N5 is a polyethylene wax powder with narrow melt point temperature range and reduced solubility or use in a wide range of inks and coatings. It has a fairly high melt point, with a softening point only a few degrees lower.

FluoroSLIP® 893-A is a stir-in powder blend of spherical micronized polyethylene (PE) and polytetrafluoroethylene (PTFE).

PowderTEX 61 is an off-white free flowing polytetrafluoroethylene (PTFE) powder that has been treated with a higher surface area inert spacer to facilitate ease of handling.

NonSKID 8001 is a combination of micronized polypropylene and PTFE. Shamrock’s NonSKID micropowders provide resistance to sliding forces.

SST®-5S is a 3 µm polytetrafluoroethylene (PTFE) micropowder with a tightly controlled particle size distribution. SST®-5S provides optimum rub and slip performance for thin-film applications. SST® products are Shamrock’s PTFE micro powders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, non-stick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

SPP-40 is a low molecular weight polypropylene texturing agent.

SST®-1MG is a friable grade of PTFE powder which can be reduced to an average particle size of 1 – 2 microns.

S-156 is a micronized modified polyethylene wax powder used to provide rub, abrasion, and mar resistance with matting effect. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, and controlled slip in a range of particle sizes.

S-394 MG is a fine particle size, polyethylene wax powder. S-394-MG is a synthetic wax with a DSC melt peak above 110°C. S-394 MG provides excellent rub/abrasion resistance to liquid inks, paste inks and thin-film coatings.

S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-400 HQ is a micronized ethylene-bis-stearamide (EBS) wax powder. Shamrock’s S-products are micronized waxes that provide rub and abrasion resistance. Included in this line are products that provide controlled slip, gloss reduction, matting, and clarity in a range of particle sizes.

S-232 MG is a micronized polyethylene-carnauba wax alloy. S-232 also is available in N1, N5 and SD3 grades.

Taber Plus 75 is a synthetic wax blend that has components showing melting peaks ranging from 83 – 125°C.

The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

S-400-N1 is micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

SST®-4D is a white low MW PTFE powder with a particle size mean value of 3 µm. SST®-4D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST® products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, non-stick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

SST®-4P is an off-white to light gray low MW PTFE powder with a particle size mean value of 3 µm.

SPP-10 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

SST®-4 is a white low MW PTFE micropowder with particle size distribution at a mean value of 3-4 µm. SST® products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, non-stick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

SST®-5 is a white low MW PTFE micro powder with particle size distribution at a mean value of 3 µm. SST® products are Shamrock’s PTFE micro powders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, non-stick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

SPP-300 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

S-NAUBA 5021 is a concentrated blend of carnauba and synthetic wax showing melting peaks ranging from 84 – 110°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.