Products

SILRES® H62 C is a liquid, solvent-free, one-part heat-curing phenyl silicone resin formulation. The product is ideal for impregnating the electrical coils of motors and generators. Besides, SILRES® H62 C can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. The formulation is ready-to-use and crosslinks under heat. While curing, SILRES® H62 C does not release chemical byproducts, so curing shrinkage is barely noticeable. The product also thermosets in thick layers, even when in contact with air. Fully cured SILRES® H62 C has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.

ELASTOSIL® N 2076 is a flowable, one-part silicone rubber for coating and encapsulation applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with good heat resistance and excellent flame retardant properties. Fully vulcanized ELASTOSIL® N 2076 shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without damage.

VINNAPAS® UW 1 FS is a tasteless, solid, thermoplastic homopolymer. It is a clear and colorless resin obtained through the polymerization of vinyl acetate. This versatile product finds application in various fields, including fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

ELASTOSIL® R 771/60 OH is a peroxide-curing HCR silicone for the manufacture of flame retardant products, particularly designed for railway applications. The product has been tested according to EN 45545-2 requirement sets R1, R7 (HL2). The color of the rubber base is white.

VINNAPAS® UW 25 FS is a solid, thermoplastic homopolymer. This clear and colorless resin is produced through the polymerization of vinyl acetate. It is tasteless and finds application in building and construction adhesives, as well as resin modification for composites. The product is available in the form of solid, colorless beads that are odorless and tasteless.

VINNAPAS® C 501 is a solid, colorless to pale yellowish copolymer of vinyl acetate and crotonic acid. Typical applications for VINNAPAS® C 501 include antishrinkage additives, composites, and resin modification for composites, such as fiber-reinforced plastics. VINNAPAS® C 501 is supplied in 25-kg paper bags.

ELASTOSIL® R 771/70 OH is a peroxide-cured high-contrast rubber silicone for the manufacture of flame retardant products, particularly designed for railway applications. The product has been tested according to EN 45545-2 requirement sets R1, R7 (HL2). The color of the rubber base is white.

VINNAPAS® C 341 is a solid, colorless to pale yellowish copolymer of vinyl acetate and crotonic acid. Typical applications for VINNAPAS® C 341 include composites and resin modification for composites, such as fiber-reinforced plastics. VINNAPAS® C 341 is supplied in 25-kg paper bags.

VINNAPAS® UW 10 FS is a solid, thermoplastic homopolymer. This clear and colorless resin is produced through the polymerization of vinyl acetate. It is tasteless. Typical applications for VINNAPAS® UW 10 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNAPAS® LL 8251 is a solid copolymer of vinyl acetate and crotonic acid, ranging in color from colorless to pale yellowish. It finds typical applications in fiber reinforced plastics and resin modification for composites. The product is available in the form of solid flakes.

ELASTOSIL® R 770/75 OH is a peroxide-crosslinked high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. The product has been tested according to BS 6853 Cat 1 and EN 45545-2 requirement sets R22 and R23 (HL3). It can be used within a temperature range of -55 °C to +210 °C.

VINNAPAS® UW 2 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. This versatile product finds typical applications in fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

ELASTOSIL® R 501/75 OH is a peroxide-curing high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. This product is recommended to be used in cable insulations for household, automotive, railway, marine, and aerospace applications where high flame retardancy is required.

ELASTOSIL® R 770/50 OH is a peroxide-cured high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. It is used for construction, automotive, railway, marine, and aerospace applications where high flame retardancy is required. This product can be used within a temperature range of -55 °C to +210 °C.

ELASTOSIL® R 770/60 OH is a peroxide-crosslinked high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. It is used for construction, automotive, railway, marine, and aerospace applications where high flame retardancy is required. This product can be used within a temperature range of -55 °C to +210 °C.

VINNAPAS® UW 4 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. Typical applications for VINNAPAS® UW 4 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNEX® 8802 is an innovative compound made from a vinyl acetate/vinyl laurate copolymer and polyvinyl acetate. This thermoplastic resin is colorless, tasteless, and odorless, and it can be easily melted in its dosable form. It is specifically recommended as a highly efficient low profile additive (LPA) that offers a significantly improved LPA effect in vinyl ester resins, even at lower curing temperatures compared to conventional LPA grades. Furthermore, VINNEX® 8802 demonstrates excellent compatibility with biopolyesters like PLA.