Products

DEHESIVE® 902 AMA® is a solvent-free, addition-curing silicone fluid formulated for release applications on paper and filmic substrates. It is an integral component of a multicomponent release coating used in the production of paper and filmic release liners. These liners are widely utilized in the manufacturing of single- and double-sided industrial laminates.

WACKER® Silicate MKS is an ethyl silicate binder suitable for the formulation of one-pack ethyl silicate zinc-rich primers. These primers are excellent anti-corrosive coatings. WACKER® Silicate MKS is a binder with outstanding anti-setting properties. Paints formulated with it are easy to stir up, even if they have been stored for a long time.

WACKER® Catalyst PT 5 is a specialized platinum catalyst designed for the efficient thermal curing of both solvent-based and solvent-free addition-crosslinking silicones. It is highly active and concentrated, ensuring rapid curing and consistent performance in silicone systems. With its high platinum concentration, this catalyst offers excellent efficiency. Additionally, WACKER® CATALYST OL is miscible with silicones in any proportion, providing versatility and ease of use in various applications.

ELASTOSIL® RD 3151 F is a silicone rubber dispersion used for textile coatings and as a primer for bonding silicone rubber on PEX surfaces. It finds application in industrial textiles. The dispersion offers properties such as high abrasion resistance, easy-to-clean surfaces, and high heat resistance.

GENIOSIL® GF 80 is an epoxy functional alkoxysilane. When used as a coupling agent in mineral-filled plastics, it enhances filler dispersibility, reduces sedimentation tendency, and significantly lowers the resin's viscosity. Moreover, it allows for higher filler loading and provides notable improvements in water (vapor) resistance, as well as resistance to acids and bases. In the realm of adhesives and sealants, incorporating GENIOSIL® GF 80 enhances adhesion to the substrate and improves mechanical properties like flexural strength, tensile strength, and modulus of elasticity.

VINNAPAS® 536 ED is a versatile polymer dispersion based on vinyl acetate and ethylene with a high solid content. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content is below 1000 ppm. The dispersion is characterized by high bonding strength combined with increased flexural strength and good compatibility with inorganic fillers like CaCO3.

SILRES® BS 310 is a solventless emulsion that can be thinned with water. It consists of polysiloxane modified with a functional silicone resin. This product is specifically designed to be added to aqueous masonry coatings and primers, either during or after their manufacture. When used undiluted, SILRES® BS 310 serves as an additive for aqueous indoor paints or coatings. Its purpose is to enhance the workability of the paint or coating, resulting in improved application properties. This product is highly compatible with indoor paints and has a positive influence on wetting and leveling properties.

VINNOL® H 40/60 is a copolymer composed of approximately 61 wt.% vinyl chloride (VC) and approximately 39 wt.% vinyl acetate (VAc). Primarily, it serves as a binder for surface coating compounds and printing inks. As a thermoplastic binder, VINNOL® H 40/60 undergoes physical drying, resulting in the formation of a film as the solvent in the formulation evaporates.

WACKER® Silicate S100 is a ready-to-use ethyl silicate binder with a flash point above 21°C. It is primarily used for formulating single-pack ethyl silicate zinc-rich primers, which are commonly used as anti-corrosive coatings. This product is particularly suitable for applications in marine, protective, and industrial coatings.

VINNOL® H 15/42 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic and physically drying binder undergoes film formation as the solvent present in the formulation evaporates.

DEHESIVE® 944 is a solvent-based, addition-crosslinkable silicone recommended for use as a release coating. It offers excellent release stability, medium release at low peel speeds, excellent bath life, and excellent anchorage to a wide variety of substrates. It can be used for coating polyester films (PET), papers, and PE-laminated papers.

VINNOL® E 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It functions primarily as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

WACKER® Silicate TES 40 WN is an ethyl silicate polymer. It is a low-viscosity liquid that provides approximately 41% of silicon dioxide (silica) upon complete hydrolysis. WACKER® Silicate TES 40 WN is used for the precipitation of polymeric SiO2 structures (silica) upon complete hydrolysis, with ethanol being produced as a by-product.

HDK® H15 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H15 is commonly utilized as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. Additionally, it serves as a reinforcing filler in elastomers, particularly silicone elastomers. Moreover, HDK® H15 functions as a free flow additive in the production of technical powders.

DEHESIVE® 929 is a solvent-free, addition-curing silicone fluid designed for release applications. This product has good curing properties, very good flow properties and coverage, an extremely stable release, excellent bath life, and excellent long-term anchorage to a wide variety of substrates.

VINNAPAS® 547 ED (NJG) is a versatile polymer dispersion with high water resistance and excellent compatibility. This product is a dispersion based on vinyl acetate and ethylene. VINNAPAS® 547 ED (NJG) is produced without using formaldehyde donors and without adding plasticizers or organic solvents.

VINNOL® H 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It is primarily employed as a binder in surface coating compounds and printing inks. VINNOL® H 15/45 M functions as a thermoplastic, physically drying binder that undergoes film formation as the solvent within the formulation evaporates.

HDK® H13L is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H13L is primarily used as a thickening, thixotropic, and anti-sedimentation agent in various applications such as coatings, printing inks, adhesives, and others. It finds its main application in polar systems. The strong hydrophobicity of HDK® H13L makes it particularly suitable for solvent-free systems, high solids formulations, and waterborne coatings.

VINNOL® H 40/43 is a copolymer composed of approximately 66 wt.% vinyl chloride (VC) and approximately 34 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film once the solvent in the formulation has evaporated.

VINNOL® H 40/55 is a copolymer comprising approximately 62 wt.% vinyl chloride (VC) and approximately 38 wt.% vinyl acetate (VAc). Its primary application lies in serving as a binder for surface coating compounds and printing inks. Functioning as a thermoplastic, physically drying binder, VINNOL® H 40/55 undergoes film formation once the solvent present in the formulation has evaporated.

VINNOL® E 15/45 is a copolymer composed of approximately 85 wt.% vinyl chloride (VC) and 15 wt.% vinyl acetate (VAc). It serves as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNOL® H 11/59 is a copolymer composed of approximately 89 wt.% vinyl chloride (VC) and 11 wt.% vinyl acetate (VAc). Its primary application lies in serving as a binder for surface coating compounds and printing inks. As a thermoplastic and physically drying binder, VINNOL® H 11/59 undergoes a film-forming process when the solvent within the formulation evaporates.

VINNOL® H 15/50 is a copolymer comprising approximately 85 wt.% vinyl chloride (VC) and 15 wt.% vinyl acetate (VAc). It serves as a binder for surface coating compounds and printing inks. As a thermoplastic and physically drying binder, VINNOL® H 15/50 creates a film as the solvent in the formulation evaporates.

HDK® N20 is a synthetic, hydrophilic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. This white colloidal powder offers high purity and serves multiple purposes. One of the primary applications of HDK® N20 is as a thickening and thixotropic agent in organic systems such as unsaturated polyesters, coatings, printing inks, adhesives, and cosmetics. Additionally, it functions as a reinforcing filler in elastomers, particularly silicone elastomers.

GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It is a clear, colorless liquid with a characteristic amine odor. This versatile product finds applications in various industries. It is commonly used in building and construction adhesives, DIY projects, flooring installation, interior paints and coatings, and waterproofing membranes. GENIOSIL® GF 93 offers excellent adhesion and bonding properties, making it an ideal choice for a wide range of applications in the construction and home improvement sectors.

VINNOL® H 40/50 is a copolymer composed of approximately 63 wt.% vinyl chloride (VC) and approximately 37 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNAPAS® B 100/20 VLE is an approximately 50% solution of a vinyl acetate/vinyl laurate copolymer in ethyl acetate. VINNAPAS® B 100/20 VLE can be diluted with esters, ketones, aromatic solvents, and chlorinated hydrocarbons. The solution's compatibility with alcohol is limited. VINNAPAS® B 100/20 VLE is not compatible with aliphatic compounds.

VINNAPAS® 561 ED is a low Tg polymer dispersion based on vinyl acetate and ethylene. It exhibits excellent elongation, flexibility, and water resistance, making it ideal for numerous construction applications. VINNAPAS® 561 ED exhibits high filler loading capabilities and is compatible with both fully and partially hydrolyzed polyvinyl alcohols, as well as other synthetic latex polymer dispersions (such as styrene/acrylic and pure acrylic dispersions).

VINNAPAS® 400 H is a poly(vinyl alcohol)-stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0°C. It was developed as a higher-viscosity, high-performance dispersion offering a superior balance of adhesive and cohesive properties useful in achieving much higher formulation viscosities.

VINNOL® H 14/36 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physical drying process, forming a film as the solvent contained in the formulation evaporates.

WACKER® Silicate TES 28 is a monomeric ethyl silicate, also known as tetraethoxysilane or tetraethyl orthosilicate. It is a colorless, low-viscosity liquid with an SiO2 content of approximately 28 wt.%. This product is commonly used in the formulation of anti-corrosive coatings, marine and protective coatings, as well as industrial coatings.

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

VINNAPAS® SAF 608 is a water-based dispersion containing a fine-particle-sized copolymer of styrene and acrylic acid ester. It has a solid content of 50%. This product is manufactured without the inclusion of coalescents, organic solvents, plasticizers, or compounds containing alkyl phenol ethoxylate (APEO). It exhibits excellent penetration into porous substrates and offers great flexibility.

SILRES® BS SMK 2101 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield a microemulsion. Dilute aqueous solutions of SILRES® BS SMK 2101 are high-quality specialty water repellents for hydrophobic impregnation and priming normal and reinforced concrete, as well as water resisting admixtures for non-load-bearing manufactured concrete products.

VINNAPAS® 530 ND is a construction dispersion for primers, cement admixes, and repair mortars. VINNAPAS® 530 ND is based on a vinyl acetate/ethylene copolymer. It reduces the elastic modulus and enhances adhesion. VINNAPAS® 530 ND is an unplasticized 55% dispersion of a vinyl acetate/ethylene copolymer in water.

VINNOL® H 30/48 M is a terpolymer consisting of approximately 70 wt.% vinyl chloride (VC), 29 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It contains carboxylate groups within its structure. This product is primarily employed as a binder for surface coating compounds and printing inks. VINNOL® H 30/48 M acts as a thermoplastic, physically drying binder that forms a film upon evaporation of the solvent in the formulation.