Products

VINNAPAS® EP 6420 is an aqueous dispersion containing a 55% copolymer of vinyl acetate and ethylene. It is produced without the use of plasticizers and is currently being introduced for industrial use. This product provides good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints.

DEHESIVE® 902 AMA® is a solvent-free, addition-curing silicone fluid formulated for release applications on paper and filmic substrates. It is an integral component of a multicomponent release coating used in the production of paper and filmic release liners. These liners are widely utilized in the manufacturing of single- and double-sided industrial laminates.

ELASTOSIL® N9111 Black is a non-slump, alkoxy-cure, one-part silicone that cures at room temperature under the influence of atmospheric moisture and exhibits excellent adhesion to many substrates. Fully cured ELASTOSIL® N9111 Black has excellent flame retardant properties and shows long-term stability against weathering, moisture, and sunlight.

VINNAPAS® 920 is a carboxylated, poly(vinyl alcohol) stabilized, vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of -20 °C. It offers excellent flow, wetting, and adhesion to a wide variety of polymeric films, coatings, and other difficult substrates.

VINNAPAS® EN 421 is an aqueous, self-crosslinking copolymer dispersion of vinyl acetate and ethylene, manufactured without the use of alkyl phenol ethoxylate (APEO)-based materials. It is particularly suitable for formulating heat-curing or self-curing adhesives. This dispersion offers the softness and flexibility typical of a vinyl acetate-ethylene copolymer adhesive base.

VINNAPAS® 401 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of -15 °C. It is specifically formulated to provide easy clean-up, extended open time, and exceptional film flexibility. VINNAPAS® 401 is commonly used as a base for adhesives, offering a well-rounded combination of excellent wet tack, fast setting, strong adhesion, and heat resistance.

VINNAPAS® EP 1400 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol. It has a glass transition temperature (Tg) of 0 °C. This high-performance polymer dispersion serves as a cost-competitive alternative for formulating waterborne adhesives, replacing plasticized vinyl-acetate homopolymer packaging adhesives, high wet tack, low solids poly(vinyl alcohol), and dextrin/starch-based adhesives. It is suitable for various adhesive applications, including conventional non-contact extrusion-applied adhesive systems.

WACKER® Silicate MKS is an ethyl silicate binder suitable for the formulation of one-pack ethyl silicate zinc-rich primers. These primers are excellent anti-corrosive coatings. WACKER® Silicate MKS is a binder with outstanding anti-setting properties. Paints formulated with it are easy to stir up, even if they have been stored for a long time.

VINNAPAS® EP 4600 is a vinyl acetate-ethylene (VAE) copolymer dispersion stabilized with polyvinyl alcohol. It possesses a glass transition temperature (Tg) of +5°C. This dispersion was specifically formulated to have a low viscosity and high solids content, allowing it to accommodate high levels of fillers.

WACKER® Crosslinker V 58 is a hydrogenpolysiloxane that contains reactive Si-H groups. It offers excellent cure properties, allowing for low platinum concentration and low temperature cure. This crosslinker provides good release stability, ensuring consistent performance over time. It also demonstrates good anchorage, which may vary depending on the substrates used.

VINNAPAS® EP 707K (ULS) offers excellent elongation, water resistance, and flexibility. It features the fastest setting speed among the VINNAPAS® EP product lines. Thanks to its low viscosity and rapid setting speed, VINNAPAS® EP 707K (ULS) is highly suitable for high-speed packaging machine applications.

VINNAPAS® EP 705A (ULS) is a vinyl acetate-ethylene copolymer specifically designed as a base polymer for high-performance adhesives. It is produced without using formaldehyde donors. The low viscosity of VINNAPAS® EP 705A (ULS) and its excellent Newtonian flow behavior make it well-suited for high-speed packaging machines.

WACKER® Catalyst PT 5 is a specialized platinum catalyst designed for the efficient thermal curing of both solvent-based and solvent-free addition-crosslinking silicones. It is highly active and concentrated, ensuring rapid curing and consistent performance in silicone systems. With its high platinum concentration, this catalyst offers excellent efficiency. Additionally, WACKER® CATALYST OL is miscible with silicones in any proportion, providing versatility and ease of use in various applications.

SILFAR® S 184 is a 100% silicone antifoam agent specially designed for the pharmaceutical and food processing industries. It fully adheres to the specifications outlined in the "Simeticone (EP)" and "Simethicone (USP)" monographs. Produced under cGMP guidelines, SILFAR® S 184 is suitable for use as an active pharmaceutical ingredient (API), particularly in antiflatulence and antacid preparations.

ELASTOSIL® RD 3151 F is a silicone rubber dispersion used for textile coatings and as a primer for bonding silicone rubber on PEX surfaces. It finds application in industrial textiles. The dispersion offers properties such as high abrasion resistance, easy-to-clean surfaces, and high heat resistance.

GENIOSIL® GF 80 is an epoxy functional alkoxysilane. When used as a coupling agent in mineral-filled plastics, it enhances filler dispersibility, reduces sedimentation tendency, and significantly lowers the resin's viscosity. Moreover, it allows for higher filler loading and provides notable improvements in water (vapor) resistance, as well as resistance to acids and bases. In the realm of adhesives and sealants, incorporating GENIOSIL® GF 80 enhances adhesion to the substrate and improves mechanical properties like flexural strength, tensile strength, and modulus of elasticity.

DEHESIVE® SF 201 AMA® is a solvent-free, addition-curing silicone fluid. It is designed for release applications and is applied with additional components on paper and filmic substrates. The fast cure properties of DEHESIVE® SF 201 AMA® allow for use with temperature-sensitive substrates or comparatively low platinum levels at standard conditions.

VINNAPAS® 536 ED is a versatile polymer dispersion based on vinyl acetate and ethylene with a high solid content. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content is below 1000 ppm. The dispersion is characterized by high bonding strength combined with increased flexural strength and good compatibility with inorganic fillers like CaCO3.

HDK® H1000/4 is a highly efficient free flow additive designed specifically for use in various types of electrophotographic toners, including monocomponent magnetic toners, monocomponent nonmagnetic toners, dual-component toners, crushed type toners, and polymerization toners. It offers medium surface area (BET) and consists of medium-sized silica particles.

WACKER® Crosslinker V 90 is a solvent-free hydrogenpolysiloxane containing reactive Si-H groups. It is known for its fast curing properties, good release stability, and excellent anchorage to a wide variety of substrates. The fast-curing properties of WACKER® Crosslinker V 90 also enable the use of a low platinum concentration.

SILRES® 64558 VP is a toluene-based, ready-to-use formulation based on polysiloxanes and silicone resins. The product is preferably used as a binder in highly flexible composite tapes or as an intermediate to manufacture silicone pressure-sensitive adhesive (PSA) formulations. In composite tapes, SILRES® 64558 VP contributes to the tapes' excellent electrical insulation properties and outstanding long-term heat resistance. Besides, composite tapes made with SILRES® 64558 VP are highly stable against environmental impacts such as moisture, pollutants, and UV light, allowing them to be exposed continuously to constantly changing climatic conditions or UV radiation.

SILRES® BS 310 is a solventless emulsion that can be thinned with water. It consists of polysiloxane modified with a functional silicone resin. This product is specifically designed to be added to aqueous masonry coatings and primers, either during or after their manufacture. When used undiluted, SILRES® BS 310 serves as an additive for aqueous indoor paints or coatings. Its purpose is to enhance the workability of the paint or coating, resulting in improved application properties. This product is highly compatible with indoor paints and has a positive influence on wetting and leveling properties.

VINNOL® H 40/60 is a copolymer composed of approximately 61 wt.% vinyl chloride (VC) and approximately 39 wt.% vinyl acetate (VAc). Primarily, it serves as a binder for surface coating compounds and printing inks. As a thermoplastic binder, VINNOL® H 40/60 undergoes physical drying, resulting in the formation of a film as the solvent in the formulation evaporates.

WACKER® Silicate S100 is a ready-to-use ethyl silicate binder with a flash point above 21°C. It is primarily used for formulating single-pack ethyl silicate zinc-rich primers, which are commonly used as anti-corrosive coatings. This product is particularly suitable for applications in marine, protective, and industrial coatings.

VINNAPAS® EP 400 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. It exhibits good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints with high cohesion. It is suitable for a range of applications, including adhesives for paper packaging and PVC furniture foil adhesives.

VINNOL® H 15/42 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic and physically drying binder undergoes film formation as the solvent present in the formulation evaporates.

VINNAPAS® EP 6411 is an aqueous dispersion containing a 50% copolymer of vinyl acetate and ethylene. It is produced without the use of plasticizers and is currently being introduced for industrial use. This product offers good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints.

HDK® H30 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H30 finds application as a thickening and thixotropic agent in various industries including coatings, printing inks, adhesives, cosmetics, and others. Additionally, it is utilized as a reinforcing filler in elastomers, specifically silicone-elastomers. Moreover, HDK® H30 acts as a free flow additive in the production of powder coatings.

DEHESIVE® 944 is a solvent-based, addition-crosslinkable silicone recommended for use as a release coating. It offers excellent release stability, medium release at low peel speeds, excellent bath life, and excellent anchorage to a wide variety of substrates. It can be used for coating polyester films (PET), papers, and PE-laminated papers.

VINNAPAS® 315 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol. It possesses a glass transition temperature (Tg) of +17 °C, which contributes to its exceptional heat resistance and high tensile strength. Specifically formulated as a base for high-speed packaging adhesives, VINNAPAS® 315 demonstrates remarkable wet tack and thickening responses. Its poly(vinyl alcohol) stabilization and impressive mechanical stability ensure smooth machining and enable its utilization in various roll, extruder, or spray applications.

SILRES® REN 50 is a medium-hard methyl phenyl silicone resin available as a 50 wt.% solution in xylene-butanol (9:1). It is primarily employed as a binder for heat-resistant, anticorrosive coatings. Additionally, SILRES® REN 50 finds extensive use as a binder in various coating applications. It offers exceptional heat resistance and weatherability, ensuring optimal performance in demanding environments. Furthermore, it exhibits fast drying characteristics, forming a tack-free film at ambient temperature.

VINNOL® E 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It functions primarily as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

WACKER® Silicate TES 40 WN is an ethyl silicate polymer. It is a low-viscosity liquid that provides approximately 41% of silicon dioxide (silica) upon complete hydrolysis. WACKER® Silicate TES 40 WN is used for the precipitation of polymeric SiO2 structures (silica) upon complete hydrolysis, with ethanol being produced as a by-product.

HDK® H15 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H15 is commonly utilized as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. Additionally, it serves as a reinforcing filler in elastomers, particularly silicone elastomers. Moreover, HDK® H15 functions as a free flow additive in the production of technical powders.

DEHESIVE® 929 is a solvent-free, addition-curing silicone fluid designed for release applications. This product has good curing properties, very good flow properties and coverage, an extremely stable release, excellent bath life, and excellent long-term anchorage to a wide variety of substrates.

ELASTOSIL® N294 is a free-flowing, ready-to-use silicone rubber that vulcanizes either at room temperature or at high temperatures under the influence of atmospheric moisture. ELASTOSIL® N294 is available in blue and red colors. It is particularly suited for screen printing.