Products

VINNAPAS® EP 6420 is an aqueous dispersion containing a 55% copolymer of vinyl acetate and ethylene. It is produced without the use of plasticizers and is currently being introduced for industrial use. This product provides good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints.

VINNOL® H 40/43 is a copolymer composed of approximately 66 wt.% vinyl chloride (VC) and approximately 34 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film once the solvent in the formulation has evaporated.

VINNOL® E 18/38 is a copolymer consisting of approximately 82 wt.% vinyl chloride (VC) and 18 wt.% vinyl acetate (VAc). It is primarily utilized as a binder in printing inks and surface coating compounds. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNOL® E 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It functions primarily as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNAPAS® EP 760 is a unique rapid-setting vinyl acetate-ethylene copolymer dispersion. It stands out as more than just a high-solids version of the VINNAPAS® EP series. This polymer exhibits exceptional adhesion to challenging substrates that are typically difficult to bond, such as polyester, polyethylene terephthalate, tempered aluminum foil, and polystyrene.

VINNOL® H 15/42 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic and physically drying binder undergoes film formation as the solvent present in the formulation evaporates.

VINNAPAS® EP 706 is a vinyl acetate-ethylene-based copolymer that is produced without the use of formaldehyde donors. It offers good machinability and strong wet tack, providing enhanced adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706 exhibits very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® EP 709 is characterized by its high cohesive strength and tensile strength, thanks to its Tg (glass transition temperature) of about +7 °C. It exhibits excellent adhesion to hard substrates and demonstrates great compatibility with inorganic fillers. As a result, VINNAPAS® EP 709 finds application in joint compounds and other building chemical applications.

DEHESIVE® SF 201 AMA® is a solvent-free, addition-curing silicone fluid. It is designed for release applications and is applied with additional components on paper and filmic substrates. The fast cure properties of DEHESIVE® SF 201 AMA® allow for use with temperature-sensitive substrates or comparatively low platinum levels at standard conditions.

SILRES® 64558 VP is a toluene-based, ready-to-use formulation based on polysiloxanes and silicone resins. The product is preferably used as a binder in highly flexible composite tapes or as an intermediate to manufacture silicone pressure-sensitive adhesive (PSA) formulations. In composite tapes, SILRES® 64558 VP contributes to the tapes' excellent electrical insulation properties and outstanding long-term heat resistance. Besides, composite tapes made with SILRES® 64558 VP are highly stable against environmental impacts such as moisture, pollutants, and UV light, allowing them to be exposed continuously to constantly changing climatic conditions or UV radiation.

VINNAPAS® 400 H is a poly(vinyl alcohol)-stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0°C. It was developed as a higher-viscosity, high-performance dispersion offering a superior balance of adhesive and cohesive properties useful in achieving much higher formulation viscosities.

VINNAPAS® 547 ED (NJG) is a versatile polymer dispersion with high water resistance and excellent compatibility. This product is a dispersion based on vinyl acetate and ethylene. VINNAPAS® 547 ED (NJG) is produced without using formaldehyde donors and without adding plasticizers or organic solvents.

SILRES® REN 50 is a medium-hard methyl phenyl silicone resin available as a 50 wt.% solution in xylene-butanol (9:1). It is primarily employed as a binder for heat-resistant, anticorrosive coatings. Additionally, SILRES® REN 50 finds extensive use as a binder in various coating applications. It offers exceptional heat resistance and weatherability, ensuring optimal performance in demanding environments. Furthermore, it exhibits fast drying characteristics, forming a tack-free film at ambient temperature.

VINNAPAS® EP 710 is a high-viscosity vinyl acetate-ethylene copolymer dispersion that is characterized by its low formaldehyde and low free VAM residue content. It exhibits good machinability and strong wet tack. VINNAPAS® EP 710 provides enhanced adhesion to films, particularly polyvinyl chloride. Additionally, it demonstrates high-viscosity thickening responses to plasticizers and solvents.

DEHESIVE® 929 is a solvent-free, addition-curing silicone fluid designed for release applications. This product has good curing properties, very good flow properties and coverage, an extremely stable release, excellent bath life, and excellent long-term anchorage to a wide variety of substrates.

VINNOL® H 40/55 is a copolymer comprising approximately 62 wt.% vinyl chloride (VC) and approximately 38 wt.% vinyl acetate (VAc). Its primary application lies in serving as a binder for surface coating compounds and printing inks. Functioning as a thermoplastic, physically drying binder, VINNOL® H 40/55 undergoes film formation once the solvent present in the formulation has evaporated.

VINNAPAS® EP 7000 is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of approximately -3°C. It has been specifically developed as an ultra-high-solids dispersion, providing superior adhesion, wet tack, and setting speed compared to conventional VAE dispersions.

VINNAPAS® EP 706K (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, offering improved adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706K (NJG) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® 323 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of +23 °C. It is specifically developed as a fast-setting and high-heat-resistant dispersion, offering compatibility with fully hydrolyzed PVOH. VINNAPAS® 323 is designed as a base for high-speed packaging applications. It demonstrates excellent wet tack, fast setting properties, and a moderate response to plasticizer thickening.

VINNAPAS® EP 724 is a vinyl acetate-ethylene copolymer dispersion with a glass transition temperature of approximately +19°C, which is the highest among the VINNAPAS® EP product lines. It possesses exceptional cohesive strength (heat resistance) and tensile strength. The dried film formed by VINNAPAS® EP 724 is more flexible than PVAc polymer while maintaining good tensile strength and high creep resistance. Furthermore, the dried film exhibits low levels of tack.

WACKER® Silicate S100 is a ready-to-use ethyl silicate binder with a flash point above 21°C. It is primarily used for formulating single-pack ethyl silicate zinc-rich primers, which are commonly used as anti-corrosive coatings. This product is particularly suitable for applications in marine, protective, and industrial coatings.

VINNAPAS® eco EP 400 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. This product exhibits good adhesion to various plastic surfaces, allowing for the creation of permanently flexible adhesive joints. Additionally, it offers high cohesion, ensuring strong bonding properties.

VINNAPAS® EP 701K is a polymer dispersion based on vinyl acetate and ethylene. It offers excellent elongation, water resistance, and flexibility. This dispersion also demonstrates outstanding adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints and high adhesion.

VINNAPAS® EP 705A (ULS) is a vinyl acetate-ethylene copolymer specifically designed as a base polymer for high-performance adhesives. It is produced without using formaldehyde donors. The low viscosity of VINNAPAS® EP 705A (ULS) and its excellent Newtonian flow behavior make it well-suited for high-speed packaging machines.

VINNOL® H 40/60 is a copolymer composed of approximately 61 wt.% vinyl chloride (VC) and approximately 39 wt.% vinyl acetate (VAc). Primarily, it serves as a binder for surface coating compounds and printing inks. As a thermoplastic binder, VINNOL® H 40/60 undergoes physical drying, resulting in the formation of a film as the solvent in the formulation evaporates.

VINNAPAS® EP 756 is a vinyl acetate-ethylene copolymer dispersion with a low viscosity and low levels of formaldehyde and free VAM residue. It demonstrates excellent machinability and strong wet tack. Additionally, it offers good adhesion to various plastic surfaces, allowing for the creation of permanently flexible adhesive joints with high cohesion.

VINNAPAS® EP 758 is a high-viscosity, high-solid vinyl acetate-ethylene copolymer dispersion with low levels of formaldehyde and free VAM residue. It offers excellent machinability and strong wet tack. VINNAPAS® EP 758 demonstrates chemical stability at both high and low pH levels. It is also compatible with various resins, solvents, plasticizers, and other modifiers, as well as other VINNAPAS® EP dispersions.

VINNAPAS® 536 ED is a versatile polymer dispersion based on vinyl acetate and ethylene with a high solid content. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content is below 1000 ppm. The dispersion is characterized by high bonding strength combined with increased flexural strength and good compatibility with inorganic fillers like CaCO3.

VINNAPAS® EP 6300 is a high-solids vinyl acetate-ethylene (VAE) copolymer dispersion with carboxylation. It has a glass transition temperature (Tg) of 0°C. This dispersion exhibits excellent adhesion to films and metals, and it also offers impressive cohesive film strength. Furthermore, it has the ability to be crosslinked.

VINNAPAS® 320 KR (ULS) is a vinyl acetate-ethylene copolymer that offers versatility to formulators in the compounding of water-resistant and high-speed packaging adhesives. It provides good adhesion to a wide range of plastic surfaces and forms permanently flexible adhesive joints with high cohesion.

SILRES® BS 4004 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 4004 serve as high-quality general-purpose water repellents for hydrophobic impregnation and priming of mineral surfaces. Treated mineral substrates exhibit an excellent beading effect. Additionally, SILRES® BS 4004 can be used for mass hydrophobation of non-load-bearing concrete products.

VINNAPAS® EF 101 is an aqueous dispersion of a vinyl acetate-ethylene copolymer stabilized with surfactants. It has a glass transition temperature (Tg) of 0°C and was specifically developed as a pigment binder for paper, paperboard, and specialty coated papers. This product offers a good rheology response at high coating solids and is manufactured without the use of alkylphenol ethoxylate (APEO) surfactants or defoamers.

VINNOL® H 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It is primarily employed as a binder in surface coating compounds and printing inks. VINNOL® H 15/45 M functions as a thermoplastic, physically drying binder that undergoes film formation as the solvent within the formulation evaporates.

VINNAPAS® EP 1 is a plasticizer-free polymer dispersion based on vinyl acetate and ethylene monomers. It exhibits good adhesion to various plastic surfaces, providing a permanently flexible glue line. It is particularly suitable for applications such as adhesives for paper packaging and PVC furniture foil adhesives.

WACKER® Silicate MKS is an ethyl silicate binder suitable for the formulation of one-pack ethyl silicate zinc-rich primers. These primers are excellent anti-corrosive coatings. WACKER® Silicate MKS is a binder with outstanding anti-setting properties. Paints formulated with it are easy to stir up, even if they have been stored for a long time.

VINNAPAS® EP 400 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. It exhibits good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints with high cohesion. It is suitable for a range of applications, including adhesives for paper packaging and PVC furniture foil adhesives.