Products

ELASTOSIL® R Plus 4305/80 US HCR silicone rubbers are addition-curing, two-part compounds (batch grades). The vulcanizates of these silicone rubbers exhibit excellent transparency and good to very good mechanical properties. ELASTOSIL® R Plus 4305/80 US is specifically designed for the fabrication of extruded articles that require high transparency and very good tear resistance values.

SILPURAN® 6000/05 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/05 A/B is designed for medical applications in compliance with Wacker Silicones' health care policy. Please note that this material has use restrictions according to Wacker Silicone's health care policy. In particular, contact with body tissue or blood is not permitted.

SILPURAN® 6000/30 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/30 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® AUX 8250 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for peroxide-cured high-contrast silicone rubber. SILPURAN® AUX 8250 RO is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

ELASTOSIL® P 7676 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.

ELASTOSIL® P 7684/40 A/B is an addition-curing RTV-2 silicone rubber, curing to a silicone elastomer of low hardness. It exhibits a fast cure at room temperature, which can be considerably accelerated by the application of heat. This product can be used for molding applications in prosthetics.

ELASTOSIL® P 7684/60 A/B is an addition-curing RTV-2 silicone rubber curing to a silicone elastomer of low hardness. It exhibits a fast cure at room temperature, which can be considerably accelerated by the application of heat. This product can be used for molding applications in prosthetics.

SILPURAN® 2122 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2122 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

ELASTOSIL® P 7683/25 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits a fast cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.

SILPURAN® 4200 is a non-slump, self-leveling silicone rubber formulation that cures at room temperature under the influence of atmospheric moisture to a silicone elastomer exhibiting good mechanical properties. SILPURAN® 4200 is designed for medical applications in compliance with Wacker Silicones' health care policy.

SILPURAN® 2114 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2114 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2100 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2100 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2112 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2112 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

ELASTOSIL® P 7600 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.

SILPURAN® 2130 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2130 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

ELASTOSIL® P 7671 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.

SILPURAN® 2117 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2117 A/B can be used as a skin adhesive in medical applications. It is especially suitable for bonding external mammary prostheses to the patient’s skin.

ELASTOSIL® P 7670 A/B is an addition-curing RTV-2 silicone rubber curing to a silicone elastomer of low hardness. This product exhibits rapid cure at room temperature, which can be considerably accelerated by the application of heat. It can specifically be used for flexible molding applications in prosthetics.

ELASTOSIL® Color Paste FL Ultramarine Blue RAL 5002 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste PT Red Brown RAL 3013 is a ready-to-use compound comprising specific color pigments and a reactive silicone polymer, which is commonly used in ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without interference of the physical properties (e.g. hardness) and without migration as observed with silicone oil.

ELASTOSIL® R 401/70 OH US is a colorless, translucent silicone rubber base noted for its flexibility, high transparency, and good mechanical properties. Its vulcanizing characteristics make it possible to achieve rubber moldings by compression, transfer, and injection molding. Post-cured vulcanizates can be used for applications in the health care and food handling industries.

ELASTOSIL® R Plus 4000/60 US HCR silicone rubbers are two-part compounds (batch grades) that cure through addition-curing. The resulting vulcanizates exhibit excellent transparency and good to very good mechanical properties. When properly postcured, these vulcanizates comply with BfR and FDA regulations for food contact. They also meet USP XXIII Class VI and ISO 10993 certification requirements. The vulcanization process does not produce peroxide decomposition products. To achieve intermediate hardness, different durometer grades can be blended with the PT 2 catalyst added last.

SILPURAN® 6610/50 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam ( 75 kGy). SILPURAN® 6610/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6400/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® Color Paste PT White RAL 9010 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

SILPURAN® 6000/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® Color Paste PT Blue RAL 5010 is a ready-to-use compound comprising specific color pigments and a reactive silicone polymer, which is commonly used in ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without interference of the physical properties (e.g. hardness) and without migration as observed with silicone oil.

SILPURAN® 6000/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® Color Paste FL Dark Blue RAL 5010 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste PT Yellow RAL 1026 F is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

ELASTOSIL® Color Paste FL Orange RAL 2004 F is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste PT Green RAL 6017 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

ELASTOSIL® Color Paste PT Heliogreen RAL 6004 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

ELASTOSIL® LR 5040/30 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/30 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

ELASTOSIL® LR 34004/50 A/B is a paste-like, white, two-component liquid silicone rubber with a very short curing time. Vulcaniates are noted for their radio-opaqueness. ELASTOSIL® LR 34004/50 A/B contains barium sulfate as a radio-opaque additive, which meets the requirements of the US and European Pharmacopeia.

ELASTOSIL® Color Paste PT Yellow RAL 1016 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.