Products

SILPURAN® 6000/05 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/05 A/B is designed for medical applications in compliance with Wacker Silicones' health care policy. Please note that this material has use restrictions according to Wacker Silicone's health care policy. In particular, contact with body tissue or blood is not permitted.

ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

SILPURAN® 6000/30 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/30 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

WETSOFT® NE 500 is a nonionic, hydrophilic emulsion concentrate that forms a stable semi-macroemulsion upon simple 1:1 dilution with cold water. It is used for the hydrophilic treatment of all kinds of fibers and textiles. WETSOFT® NE 500 imparts a pleasant, soft, and supple hand to woven and knitted fabrics, as well as towels. Additionally, finishing with WETSOFT® NE 500 improves the moisture management of the treated textiles.

CENUSIL® M 825 A/B is a room-temperature curing silicone rubber (RTV-2) that is pourable and cures at ambient temperature. This addition-curing silicone rubber is specifically designed for making molds used in concrete casting. Moreover, CENUSIL® M 825 A/B is compliant with food contact regulations, including FDA and BfR standards.

ELASTOSIL® AUX Stabilizer H2 is a ready-to-use silicone rubber additive compound containing a heat-stabilizing filler. Thanks to its paste character, ELASTOSIL® AUX Stabilizer H2 can easily be incorporated into ELASTOSIL® R and R plus mixtures on two-roll mills. It is used to extend the service life of silicone elastomers at temperatures above 170°C.

CENUSIL® M 820 A/B is a room-temperature curing silicone rubber (RTV-2) that is pourable and cures at ambient temperature. It has excellent flowability and high tear strength. This addition-curing silicone rubber is primarily used for creating molds without shrinkage and with exceptional reproduction accuracy.

SILPURAN® 4200 is a non-slump, self-leveling silicone rubber formulation that cures at room temperature under the influence of atmospheric moisture to a silicone elastomer exhibiting good mechanical properties. SILPURAN® 4200 is designed for medical applications in compliance with Wacker Silicones' health care policy.

SEMICOSIL® 962 TC A/B is a gap filler paste material with excellent thermal conductivity. It is a two-part silicone rubber that is shear-thinning, easy to dispense, and non-slump. This addition-curing formulation cures at room temperature, resulting in a soft, flexible, and tacky rubber with outstanding thermal conductivity properties.

ELASTOSIL® LR 3153 A/B is a liquid, solvent-free silicone rubber designed for coatings on textile-braided cables and a primer for bonding silicone rubber on PEX surfaces. The product has good adhesion to glass fiber and common textiles. It provides a glossy surface and may be diluted with Isopar E or other aliphatic hydrocarbons.

CENUSIL® M 830 A/B is a room-temperature curing silicone rubber (RTV-2) that is pourable and cures at ambient temperature. This addition-curing silicone rubber is specifically designed for making molds used in concrete casting. Moreover, CENUSIL® M 830 A/B is compliant with food contact regulations, including FDA and BfR standards.

ELASTOSIL® AUX Stabilizer H1 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

ELASTOSIL® Color Paste FL Polarblue is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® liquid silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

SEMICOSIL® 9672 TC is a thermally conductive gap filler silicone material designed for heat sink applications in the electronics industry. It is a shear-thinning, non-slump, two-part silicone gel that cures at room temperature to a soft gel with excellent thermal conductivity.

SEMICOSIL® 9671 TC2 A/B is a thermal conductive gap filler silicone material used in heat sink applications for the electronics industry. It is a shear-thinning, easy-dispensing, non-slump, addition-curing, two-part silicone rubber that cures at room temperature. This material is specifically designed to enhance heat dissipation and provide efficient thermal management in electronic devices. SEMICOSIL® 9671 TC2 A/B is ideal for filling gaps and ensuring effective heat transfer in heat sink applications.

SIPELL® AP 304 is a special, nonionic, finely dispersed emulsion based on a high-molecular-weight film-forming silicone polymer obtained through innovative processing. This emulsion can be easily diluted and exhibits good compatibility with polyurethane, acrylate, and water-based NC polymer systems in topcoat formulations. The water-based and solvent-free (low VOC) additive SIPELL® AP 304 is particularly useful for enhancing the abrasion resistance of finished leather goods.

ELASTOSIL® LR 3072/50 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

ELASTOSIL® LR 3003/05 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily  pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3003/85 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3023/60 A/B is a liquid silicone rubber. It is a paste-like, easily pigmentable, two-component compound with short curing times and excellent coolant resistance. Vulcanizates are opaque with average mechanical properties, and they are noted for ultra-low compression sets after post-curing.

ELASTOSIL® LR 3070/60 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3070 series. This product is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Its vulcanizates are noted for excellent mechanical and electrical properties.

ELASTOSIL® LR 3844/30 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3043/40 A/B A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3070/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3070 series. This product is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Its vulcanizates are noted for excellent mechanical and electrical properties.

ELASTOSIL® AUX FL Non-Healing is a ready-to-use masterbatch comprising specific additives and reactive silicone polymers that are commonly used in ELASTOSIL® liquid silicone rubber. This ensures homogeneous covulcanization without migration, as may be observed for systems based on silicone oil. It can be used to reduce self-healing and other sticking phenomena.

ELASTOSIL® Color Paste FL Violet Aubergine 2603 C is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used in ELASTOSIL® liquid silicone rubber. This ensures a homogeneous covulcanization of the color paste without impairment of the physical properties (e.g. hardness) or migration, as may be observed for systems based on silicone oil.

ELASTOSIL® Color Paste FL Ultramarine Blue RAL 5002 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste FL Squirrel Grey RAL 7000 K2 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

WACKER® Viscoregler 64 is a solvent-free, reactive diluting agent suitable for liquid silicone rubbers in the ELASTOSIL LR product range. It can be used to reduce the viscosity of addition-curing liquid silicone rubber formulations. WACKER® Viscoregler 64 contains reactive functionalities and becomes incorporated into the silicone network during the curing process.

ELASTOSIL® Color Paste FL Turquoise RAL 180 70 25 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used in ELASTOSIL® liquid silicone rubber. This ensures a homogeneous covulcanization of the color paste without impairment of the physical properties (e.g. hardness) or migration, as may be observed for systems based on silicone oil.

ELASTOSIL® LR 3851/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3851 series. It is a paste-like, easily pigmentable, two-component product with a short curing time and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

SILPURAN® 6610/50 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam ( 75 kGy). SILPURAN® 6610/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6400/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

POWERSIL® 730 A/B is a low-viscosity two-component compound known for its excellent processing properties, high tracking and erosion resistance, as well as outstanding mechanical and electrical properties. It is a ready-to-use system that is very easy to process due to its low viscosity. Additionally, it exhibits excellent dielectric properties and high arcing resistance.

ELASTOSIL® Color Paste FL Yellow RAL 1006 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® LR 3065/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3065 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3003 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.