Products in Bookbinding: Hot Melt Adhesive

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Kolon Industries HIKOTACK® P-110S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

Kolon Industries HIKOREZ® A-1100 is a pale yellow thermoplastic resin obtained from the polymerization of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This resin provides well-balanced adhesion properties such as adhesive strength, bond strength and cohesive force required for pressure sensitive adhesive (PSA), and is mainly used as tackifier and hot melt adhesive (HMA) for pressure sensitive adhesive. This resin also can be used as the binder for hot melt road marking (HMRM). .

Kolon Industries SUKOREZ® SU-210 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-210 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Kolon Industries SUKOREZ® SU-230S is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-230S is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers, and metallocene polyolefins and APAO.

Polybut™ 0 is a low molecular weight conventional polybutene.

Kolon Industries HIKOREZ® T-1095 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin offers excellent compatibility with Ethylene-Vinyl-Acetate (EVA) or Styrene-Isoprene-Styrene copolymer (SIS), and is mainly used as tackifier for hot melt pressure sensitive adhesive (HMPSA) and hot melt adhesive (HMA). HIKOREZ® T-1095 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are hot melt based pressure sensitive adhesive(HMPSA), especially Stryene-Isoprene-Styrene (SIS) based PSA. And this grade also can be used as tackifier for hot melt adhesive(HMA), because of its good compatibility with base polymer such as EVA. .

Polybut™ 28 is a low molecular weight conventional polybutene.

SYLVALITE RE 88F rosin ester is a very light and stable glycerol ester with a medium softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. This rosin ester is especially suitable for pressure sensitive adhesive tapes and labels application. The low Tg of SYLVALITE RE 88F rosin ester provides enhanced performance at lower temperatures.

SYLVALITE RE 100S rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 1005 exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

SYLVATAC RE 85 rosin ester is a stabilized glycerol ester of Tall Oil Rosin. The thermal stability and polymer compatibility of this resin make it useful in a wide variety of adhesives. The low Tg of SYLVATAC RE 85 rosin ester enables adhesive performance at lower temperatures.

SCG Chemicals LP1020P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary Of SCC Chemicals co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1020P is guaranteed its high quality for various applications.

SCG Chemicals LP1024P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1024P is guaranteed its high quality for various applications.

SYLVARES TP 2040 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties.

SYLVALITE RE 110L rosin ester is a light-colored, high softening point, pentaerythritol ester of tall oil rosin, which has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives it provides excellent color stability when compared with other tackifiers of its type.

Kolon Industries HIKOREZ® T-3100 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin is used together with natural rubber for solvent-based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Butadiene-Styrene copolymer (SBS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). HIKOREZ® T-3100 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive(HMPSA) and hot melt adhesive(HMA). .

Kolon Industries SUKOREZ® SU-230 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-230 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers and metallocene polyolefins.

Bitoner Resin BT-1200 is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

Kolon Industries SUKOREZ® SU-500 is white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This product offers excellent heat stability and compatibility with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS), and used as tackifier for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-500 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Polybut™ 80 is a low molecular weight conventional polybutene.

Polybut™ 6 is a low molecular weight conventional polybutene.

LUBA-print® 154/C is a Wax dispersion / Wachsdispersion. It is also used as aqueous paint-systems, to improve slip and mar resistance. aqueous flexo printing inks to improve the rub resistance. Hot melts, to improve antiblocking properties.

Kolon Industries SUKOREZ® SU-400 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-400 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.

Puyang United Chemical C5 Petroleum Resin UCA100 hydrocarbon resin is an aliphatic tackifier resins with an excellent compatibility with SIS, SIBS, and SBS block copolymers, EVA copolymers and nature rubber.

SCG Chemicals WD2040P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

SYLVARES TP 2040HM tackifier is a high softening point thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties.

Kolon Industries SUKOREZ® SU-401 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-401 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.

Kolon Industries SUKOREZ® SU-625 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This product offers excellent heat stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS), and used as tackifier for hot melt adhesive (HMA), hot melt pressure sensitive adhesive (HMPSA), as well as polypropylene (PP) modifier. SUKOREZ® SU-625 is water white cycloaliphatic hydrocarbon resin. The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Polybut™ 9 is a low molecular weight conventional polybutene.

Polybut 200 is a low molecular Weight Conventional Polybutene

SCG Chemicals LP1040P is a refined polyethylene homopolymer wax which is derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1O40P is guaranteed its high quality for various applications.

SYLVALITE RE 105XL rosin ester is very light colored and stable with moderately high softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. Adhesives formulated with SYLVALITE RE 105XL resin achieve the lightest color among the rosin ester product range.