Products in Automotive: Spray Lay-up

CoreLite PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion. Resistance to fatigue is superior, as well as its chemically stability and UV resistance. Water absorption is minimal. CoreLite PET can handle processing temperatures up to 150 °C (302 °F) . During high temperature processing it is thermally stable and no outgassing or expansion after postcure occurs. In the event of fire, no toxic gasses are generated.

Coremat® XM 2 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

G-TEX M 200 is Nonwoven fabric made from recycled carbon fiber. 200 denotes the fabric areal weight in gsm.

Ilkalem AS P-192 TA is ortho unsaturated polyester resin for GRP applications.

Coremat® XM 10 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process.

AIREX® PXw is a closed-cell, fiber reinforced polymer foam panel with a special formulation and very high mechanical properties. The sophisticated manufacturing process evenly distributes continuous glass fibers with woven fabrics throughout the foam. This generates a product with enhanced mechanical properties in flexure (bending), allowing it to be used with or without face sheets.AIREX® PXw is dimensionally stable, does not lose strength when wet, and is resistant to chemicals and high emperatures. It is ideally suited as a material for static applications requiring high stiffness or as a replacement for wood and plywood.

Polynt Group 787-5995 - toughened vinyl ester resin core shell rubber that offers dramatically improved fracture toughness and corrosion resistance of typical vinyl ester resins; promoted for room temperature cure. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

Aekyung Chemical SLO-180NT is an ortho type UPR.

NORESTER 912 TPAV is a Orthophthalic lamination resin, Thixotropic and pre-accelerated product, Resin with low styrene emissions, Several versions available ( White tint, Different gel times ),

Polydyne® 6120 is general purpose, preaccelerated, thixotropic with low reactivity. And it is generally used in composites applicatons.

AIREX® PXw is a closed-cell, fiber reinforced polymer foam panel with a special formulation and very high mechanical properties. The sophisticated manufacturing process evenly distributes continuous glass fibers with woven fabrics throughout the foam. This generates a product with enhanced mechanical properties in flexure (bending), allowing it to be used with or without face sheets.AIREX® PXw is dimensionally stable, does not lose strength when wet, and is resistant to chemicals and high emperatures. It is ideally suited as a material for static applications requiring high stiffness or as a replacement for wood and plywood.

AIREX® T92 is a closed-cell, thermoplastic and recyclable polymer foam with very good mechanical properties and an outstanding price / performance ratio. It has an extraordinary resistance to fatigue, is chemically stable and has negligible water absorption. It is thermally stable during high temperature processing and post curing without after expansion or out-gassing. T92 is designed for easy use with all resin systems and processing technologies. AIREX® T92 is ideally suited as a core material for a wide variety of lightweight sandwich structures subjected to static and dynamic loads and/or exposed to elevated temperatures during manufacturing

Our vinyl ester laminating resin was formulated with an epoxy vinyl ester polymer This gives it very good physical properties and a high resistance to corrosion and penetration of water. This resin is recommended for the manufacture of FRP structures of small to large size with high production rates at room temperature. It is formulated to cure at room temperature with methyl ethyl ketone peroxide.

Aekyung Chemical SL-100 is a DCPD type UPR.

Coremat® Xi 1 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Coremat® Xi 2 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

AIREX® T92 is a closed-cell, thermoplastic and recyclable polymer foam with very good mechanical properties and an outstanding price / performance ratio. It has an extraordinary resistance to fatigue, is chemically stable and has negligible water absorption. It is thermally stable during high temperature processing and post curing without after expansion or out-gassing. T92 is designed for easy use with all resin systems and processing technologies. AIREX® T92 is ideally suited as a core material for a wide variety of lightweight sandwich structures subjected to static and dynamic loads and/or exposed to elevated temperatures during manufacturing

Coremat® XM 3 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Norsodyne® 21033 - promoted and non-waxed, good weathering properties, good water resistance.

Chopped strands or Chopped fibers made of FILAVA™ CS BSB3_011.06.IS65T.D fibers are designed to reinforce thermoplastics or thermoset composites and can be used for wet and dry fiber laying processes, compounding and injection molding (see ISOMATEX Sales department for more information).

MATLINE+ 201 is designed for use as a core material in dry and wet-on-wet hand layup and spray lamination production. It is proven as an effective alternative to glass fiber core layers, delivering consistent thickness without adding excess weight, improving rigidity whilst lowering overall manufacturing costs.

AIREX® R82 is a closed-cell, thermoplastic polymer foam that combines outstanding fire resistance with very low smoke and toxicity, along with excellent dielectric properties. It has an outstanding strength to weight ratio, very low moisture absorption, is thermoformable and ductile. AIREX® R82 is an exceptional core material for use in structural lightweight applications that demand high fire resistance, radar transparency or operation in extremely hot or cold environments

BALTEK® SBC is a core material produced from controlled kilndried balsa wood in the ‘end-grain’ configuration with physical time to kiln control. 3A Composites Core Materials owns and manages several thousand hectares of FSC®-certified balsa wood plantations. Its cultivation from seedling to the tree ensures sustainable forest management and strict traceability. Documented and controlled time to kiln-drying makes SBC ideal for vacuum infusion. Own plantations enable 3A Composites to provide a continuous supply to industrial customers. BALTEK® SBC has exceptionally high strength and stiffness to weight ratios and achieves an excellent bond with all types of resins. It is an ideal core material for an extensive range of applications. All while being a renewable resource.

MATLINE+ 401 is designed for use as a core material in dry and wet-on-wet hand layup and spray lamination production. It is proven as an effective alternative to glass fiber core layers, delivering consistent thickness without adding excess weight, improving rigidity whilst lowering overall manufacturing costs.

Polynt Group 787-2599 - toughened vinyl ester resin offering improved fracture toughness and crack resistance; unthixed, unpromoted. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

AIREX® R82 is a closed-cell, thermoplastic polymer foam that combines outstanding fire resistance with very low smoke and toxicity, along with excellent dielectric properties. It has an outstanding strength to weight ratio, very low moisture absorption, is thermoformable and ductile. AIREX® R82 is an exceptional core material for use in structural lightweight applications that demand high fire resistance, radar transparency or operation in extremely hot or cold environments

Aekyung Chemical SL-112 is an ortho type UPR.

AIREX® T90 is a closed-cell, thermoplastic and recyclable polymer foam with excellent fire, smoke & toxicity (FST) properties. It has very good mechanical properties and an extraordinary resistance to fatigue, is chemically stable and has negligible water absorption. It is thermally stable during high temperature processing and post curing. T90 is designed for easy use with all resin systems and processing technologies. AIREX® T90 is the ideal core material for structural sandwich applications requiring high fire resistance.

MATLINE+ 501 is designed for use as a core material in dry and wet-on-wet hand layup and spray lamination production. It is proven as an effective alternative to glass fiber core layers, delivering consistent thickness without adding excess weight, improving rigidity whilst lowering overall manufacturing costs.

Norsodyne® 21032 - thixotropic, low peak exotherm and low shrinkage, promoted and non-waxed, good water resistance, lloyd's approved. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Gel Coat IN-500 (Clear) is a premium quality gelcoat. It is a decorative coating based on ISO/NPG unsaturated polyester resin, for “spray” and “hand” application. The gelcoat could be tinted to any color in accordance with RAL cataloge or with your laminate sample.

Gel Coat IN-700 H/S* (Colorless) is a premium quality gelcoat. It is enhanced UV-resistant decorative coating based on ISO/NPG unsaturated polyester resin, for “spray” (GELCOAT IN-700 S) and “hand” application (GELCOAT IN-700 H). The gelcoat could be tinted to any color in accordance with RAL cataloge or with your laminate sample.

Norsodyne® G-550Y is general purpose orthophthalic resin for hand lay up and spray up with high strength and it is generally used in automotive, industrial sector, marine applicatons.

Norsodyne® 2625 - promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Norsodyne® 2625NP - non-promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

ARMORSTAR VSXH Series is generally used in Automotive,Building and Construction,Composites,Industrial sector,Marine,Mass Transports,Mold manufacture applications.